Decrease of Material Burden in a Novel Alkali-Saving Reduction Treatment Process of Nickel Slag Based on NaOH Roasting
Source abstract
Abstract
Conventional reduction treatment methods for nickel slag show drawbacks such as high energy cost, heavy material burden or secondary pollution. Thus, a novel environmentally friendly reduction treatment method for high-silicon wastes, especially nickel slag, is proposed in this paper. The main characteristic is to lower the alkali–ore ratio (mass ratio of NaOH to ore) through introducing a high-speed premixing procedure before roasting. Optimal process parameters have been found experimentally, i.e., a roasting temperature of 823 K, alkali–ore ratio of 1.6:1, and roasting time of 30 min. The desilication ratio reached to 91.3 wt.%. Compared with previous NaOH roasting processes with stirring, the NaOH consumption is down by 60%, which greatly reduces the material burden. Through carbonation decomposition of the Na2SiO3 solution generated in the NaOH roasting, amorphous silica is recycled as the final product. The proposed method is expected to be a promising method for industrial reduction treatment of nickel slag.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Extraction and Separation Processes · Metallurgical Processes and Thermodynamics · Metal Extraction and Bioleaching
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Y.J. Gao, H.J. Huang, W.J. Tang, X.Y. Liu, X.Y. Yang, and J.B. Zhang, Microporous Mesoporous Mater. 217, 210 (2015).10.1016/j.micromeso.2015.06.033 ↗
2. J. Yang, X. Zhang, Y.Q. Liu, H.W. Ma, W.W. Feng, and C. Zeng, Integr. Ferroelectr. 161, 10 (2015).10.1080/10584587.2015.1035198 ↗
3. W.N. Mu, X.Y. Lu, F.H. Cui, S.H. Luo, and Y.C. Zhai, Trans. Nonferr. Met. Soc. Chin 28, 169 (2018).10.1016/S1003-6326(18)64650-3 ↗
4. W.N. Mu, Doctoral dissertation (Northeastern University, 2009) (in Chinese).
5. C. Li and X. Qiao, Chem. Eng. J. 302, 388 (2016).10.1016/j.cej.2016.05.029 ↗
6. M. Iwao, M. Okuno, M. Koyano, and S. Katayama, J. Mineral. Petrol. Sci. 105, 135 (2010).10.2465/jmps.090810 ↗
7. Y.C. Li, X.B. Min, Y. Ke, D.G. Liu, and C.J. Tang, Waste Manag 83, 202 (2019).10.1016/j.wasman.2018.11.019 ↗
8. Y.B. Li, Z.M. Li, B. Wang, Z.M. Dong, and S.X. Song, Miner. Eng. 131, 376 (2019).10.1016/j.mineng.2018.11.026 ↗
9. T.C. Alex, P. Kumar, S.K. Roy, and S.P. Mehrotra, Miner. Process. Extr. Metall. Rev. 37, 1 (2016).10.1080/08827508.2015.1055626 ↗
10. A. Fedoročková, P. Raschman, G. Sučik, B. Plesingerová, Ľ. Popoviĉ, and J. Briančin, Ceram. -Silik. 59, 275 (2015).
11. P.L. Zhang, Z.F. Liu, T.X. Liu, and Z.Q. Li, Eur. J. Inorg. Chem. 32, 5577 (2014).10.1002/ejic.201402511 ↗
12. C.C. Li and X.C. Qia, Chem. Eng. J. 302, 388 (2017).10.1016/j.cej.2016.05.029 ↗
13. H.W. Guo, J. Wang, X.X. Zhang, F. Zheng, and P. Li, Metall. Mater. Trans. B 49, 2906 (2018).10.1007/s11663-018-1341-5 ↗
14. G.Z. Lu, T.G. Zhang, C. Cheng, W.G. Zhang, L. Wang, Y.X. Wang, and Z.M. Zhang, Mater. Res. Express. 6, 6 (2019).
15. N.K. Mermer, M.S. Yilmaz, O.D. Oademir, and M.B. Piskin, J. Therm. Anal. Calorim. 129, 1807 (2017).10.1007/s10973-017-6371-8 ↗
16. K.Z. Yan, Y.X. Guo, D.D. Liu, Z.B. Ma, and F.Q. Cheng, J. Solid State Chem. 265, 326 (2018).10.1016/j.jssc.2018.06.014 ↗
17. J.N. Liu, X.Y. Shen, Y. Wu, J. Zhang, and Y.C. Zhai, Int. J. Miner. Metall. Mater. 23, 966 (2016).10.1007/s12613-016-1313-1 ↗
18. A. Kongnoo, S. Tontisirin, P. Worathanakul, and C. Phalakomkule, Fuel 193, 385 (2017).10.1016/j.fuel.2016.12.087 ↗
19. P.F. Fu, T.W. Yang, J. Feng, and H.F. Yang, J. Ind. Eng. Chem. 29, 338 (2015).10.1016/j.jiec.2015.04.012 ↗
20. H. Du, L. Ma, X.Y. Liu, F. Zhang, X.Y. Yang, Y. Wu, and J.B. Zhang, Energy Fuels 32, 5374 (2018).10.1021/acs.energyfuels.8b00318 ↗
21. S.Q. Zhang, S. Ravi, Y.R. Lee, J.W. Ahn, and W.S. Ahn, J. Ind. Eng. Chem. 72, 241 (2018).10.1016/j.jiec.2018.12.024 ↗
22. W. Chansiriwat, D. Tanangteerapong, and K. Wantala, Sains Malaysiana 45, 1723 (2016).
23. C. Belviso, L.C. Giannossa, F.G. Huertas, A. Lettino, A. Mangone, and S. Fiore, Microporos Mesoporous Mater. 212, 35 (2015).10.1016/j.micromeso.2015.03.012 ↗
24. X.D. Wu, M.H. Fan, J.F. Mclaughlin, X.D. Shen, and G. Tan, Powder Technol. 323, 310 (2018).10.1016/j.powtec.2017.10.022 ↗
25. Y. Cheng, M.S. Xia, F. Luo, N. Li, C.B. Guo, and C.D. Wei, Colloids Surf. A 490, 200 (2016).10.1016/j.colsurfa.2015.11.055 ↗
26. W.B. Hu, M.M. Li, W. Chen, N. Zhang, B. Li, M. Wang, and Z.M. Zhao, Colloids Surf. A 501, 83 (2016).10.1016/j.colsurfa.2016.04.059 ↗
27. C.L. Liu, S.L. Zheng, S.H. Ma, Y. Luo, J. Ding, X.H. Wang, and Y. Zhang, Fuel Process. Technol. 173, 40 (2018).10.1016/j.fuproc.2018.01.007 ↗
28. J. Baek, Y. Jo, J. Lee, S. Choi, and H. Jeong, J. Nanosci. Nanotechnol. 17, 2610 (2017).10.1166/jnn.2017.13343 ↗
29. A. Fedorockova, P. Raschman, G. Sucik, B. Plesingerova, L. Popovic, and J. Briancin, Ceram.-Silik. 59, 275 (2015).
30. S. Parirenyatwa, L. Escudero-Castejon, S. Sanchez-Segado, Y. Hara, and A. Jha, Hydrometallurgy 165, 213 (2016).10.1016/j.hydromet.2015.08.002 ↗
31. H. Wang, Q.M. Feng, X.K. Tang, and K. Liu, Sep. Sci. Technol. 51, 2465 (2016).10.1080/01496395.2016.1206933 ↗
32. X.Y. Deng, Y.L. Feng, H.R. Li, Z.W. Du, J.X. Kang, and C.L. Guo, Trans. Nonferr. Met. Soc. Chin 28, 1045 (2018).10.1016/S1003-6326(18)64742-9 ↗