Influence of Growth Rate on Microstructural Length Scales in Directionally Solidified NiAl-Mo Hypo-Eutectic Alloy
Source abstract
Abstract
In this article, the Ni-46.1Al-7.8Mo (at.%) alloy was directionally solidified at different growth rates ranging from 15 μm/s to 1000 μm/s under a constant temperature gradient (334 K/cm). The dependence of microstructural length scales on the growth rate was investigated. The results show that, with the growth rate increasing, the primary dendritic arm spacings (PDAS) and secondary dendritic arm spacings (SDAS) decreased. There exists a large distribution range in PDAS under directional solidification conditions at a constant temperature gradient. The average PDAS and SDAS as a function of growth rate can be given as λ1 = 848.8967 V−0.4509 and λ2 = 64.2196 V−0.4140, respectively. In addition, a comparison of our results with the current theoretical models and previous experimental results has also been made.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solidification and crystal growth phenomena · Aluminum Alloy Microstructure Properties · nanoparticles nucleation surface interactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. D. Poirier, Metall. Trans. B 18, 245 (1987).10.1007/BF02658450 ↗
2. N. Maraşlı, K. Keşlioğlu, B. Arslan, H. Kaya, and E. Çadırlı, J. Mater. Process. Technol. 202, 145 (2008).10.1016/j.jmatprotec.2007.09.011 ↗
3. E. Çadırlı, I. Karaca, H. Kaya, and N. Maraşlı, J. Cryst. Growth 255, 190 (2003).10.1016/S0022-0248(03)01214-4 ↗
4. G.L. Ding, W.D. Huang, X. Huang, X. Lin, and Y.H. Zhou, Acta Mater. 44, 3705 (1996).10.1016/1359-6454(96)00018-3 ↗
5. J.A. Warren and J.S. Langer, Phys. Rev. E 47, 2702 (1993).10.1103/PhysRevE.47.2702 ↗
6. Y.Z. Zhou and A. Volek, Scr. Mater. 56, 537 (2007).10.1016/j.scriptamat.2006.11.002 ↗
7. D. Ma, W. Xu, S.C. Ng, and Y. Li, Mater. Sci. Eng., A 390, 52 (2005).10.1016/j.msea.2004.07.032 ↗
8. H. Kaya, E. Çadırlı, K. Keşlioğlu, and N. Maraşlı, J. Cryst. Growth 276, 583 (2005).10.1016/j.jcrysgro.2004.11.392 ↗
9. J.D. Hunt, Solidification and casting of metals (London: The Metals Society, 1979), pp. 3–9.
10. W. Kurz and J.D. Fisher, Acta Metall. 29, 11 (1981).10.1016/0001-6160(81)90082-1 ↗
11. R. Trivedi, Metall. Mater. Trans. A 15, 977 (1984).10.1007/BF02644689 ↗
12. J.D. Hunt and S.Z. Lu, Metall. Mater. Trans. A 27, 611 (1996).10.1007/BF02648950 ↗
13. R. Trivedi and K. Somboonsuk, Mater. Sci. Eng., A 65, 65 (1984).10.1016/0025-5416(84)90200-3 ↗
14. D. Bouchard and J.S. Kirkaldy, Metall. Mater. Trans. B 28, 651 (1997).10.1007/s11663-997-0039-x ↗
15. M. Li, T. Mori, and H. Iwasaki, Mater. Sci. Eng., A 265, 217 (1999).10.1016/S0921-5093(98)01123-X ↗
16. Q.Y. Pan, W.D. Huang, X. Lin, and Y.H. Zhou, J. Cryst. Growth 181, 109 (1997).10.1016/S0022-0248(97)00273-X ↗
17. X.W. Hu, S.M. Li, W.J. Chen, S.F. Gao, L. Liu, and H.Z. Fu, J. Alloys Compd. 484, 631 (2009).10.1016/j.jallcom.2009.05.008 ↗
18. N. Maraşlı, K. Keşlioğlu, B. Arslan, H. Kaya, and E. Çadırlı, J. Mater. Process. Technol. 202, 145 (2008).10.1016/j.jmatprotec.2007.09.011 ↗
19. J. Feng, W.D. Huang, X. Lin, Q.Y. Pan, T. Li, and Y.H. Zhou, J. Cryst. Growth 197, 393 (1999).10.1016/S0022-0248(98)00916-6 ↗
20. G.Y. An and L.X. Liu, J. Cryst. Growth 80, 383 (1987).10.1016/0022-0248(87)90085-6 ↗
21. J. Hui, R. Tiwari, X. Wu, S.N. Tewari, and R. Trivedi, Metall. Mater. Trans. A 33, 3499 (2002).10.1007/s11661-002-0337-5 ↗
22. M. Barth, B. Wei, and D.M. Herlach, Mater. Sci. Eng., A 226–228, 770 (1997).10.1016/S0921-5093(96)10728-0 ↗
23. S.V. Raj, I.E. Locci, J.A. Salem, and R.J. Pawlik, Metall. Mater. Trans. A 33, 597 (2002).10.1007/s11661-002-0122-5 ↗
24. P.L. Ferrandini, F.L.G.U. Araujo, W.W. Batista, and R. Caram, J. Cryst. Growth 275, 147 (2005).10.1016/j.jcrysgro.2004.10.101 ↗
25. J.F. Zhang, J. Shen, Z. Shang, L. Wang, and H.Z. Fu, Mater. Charact. 99, 160 (2015).10.1016/j.matchar.2014.11.016 ↗
26. S.F. Gao, L. Liu, Y.K. Xu, C.B. Yang, J. Zhang, and H.Z. Fu, China Foundry 9, 160 (2012).
27. Z.X. Min, J. Shen, Y.L. Xiong, W. Wang, Y.J. Du, L. Liu, and H.Z. Fu, Acta Metall. Sin. 47, 397 (2011).
28. A.B. Kloosterman and J.T.H.M. Hosson, J. Mater. Sci. 32, 6201 (1997).10.1023/A:1018672707864 ↗
29. D. Ma, Y. Li, S.C. Ng, and H. Jones, Acta Metall. 48, 419 (2000).
30. C.M. Klaren, J.D. Verhoeven, and R. Trivedi, Metall. Trans. A 11, 1853 (1980).10.1007/BF02655101 ↗
31. H.Z. Fu, L. Liu, J.J. Guo, and J.S. Li, Directional solidification and processing of advanced materials (Beijing: Beijing Science Press, 2008), p. 687.
32. N. Marasli and J.D. Hunt, Acta Mater. 44, 1085 (1996).10.1016/1359-6454(95)00227-8 ↗
33. J.Q. Li and Y.L. Tang, J. Alloys Compd. 329, 157 (2001).10.1016/S0925-8388(01)01573-0 ↗
34. E. Çadırlı, N. Maraslı, B. Bayender, and M. Gündüz, Mater. Res. Bull. 35, 985 (2000).10.1016/S0025-5408(00)00285-3 ↗
35. V. Seetharaman, L.M. Fabietti, and R. Trivedi, Metall. Trans. A 20, 2567 (1989).10.1007/BF02666693 ↗
36. C. Cicutti and R. Boeri, Scr. Mater. 45, 1455 (2001).10.1016/S1359-6462(01)01183-6 ↗
37. M. Wolf (Paper presented to the Continuous Casting, Iron and Steel Society of AIME, Varrendale, 1997, pp. 259–269).