Optimization of Mechanical Properties of Hybrid Al2O3/SiCp Reinforced Composites Produced by Pressure-Assisted Aluminum Infiltration
Source abstract
Abstract
This study investigates Al2O3/SiCp-Al composites fabricated by pressure-assisted liquid–metal infiltration techniques and modified alumina/SiC particle preforms. The infiltration was achieved successfully; microstructure and mechanical properties of the composites were examined. An experimental design based on the Taguchi technique was used to acquire the data and investigate the mechanical properties of the hybrid composites. An orthogonal array and analysis of variance were employed to investigate the influence of test parameters such as infiltration temperature and infiltration pressure. It was found that the infiltration temperature was the most effective factor in increasing the mechanical properties of hybrid Al2O3/SiCp composite.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Innovations in Concrete and Construction Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. M.I. Pech Canul, R.N. Katz, and M.M. Makhlouf, J. Mater. Sci. 35, 2167 (2000).10.1023/A:1004758305801 ↗
2. C. Garcia Cordovilla, E. Louis, and J. Narciso, Acta Mater. 47, 4461 (1999).10.1016/S1359-6454(99)00318-3 ↗
3. S. Naher, D. Brabazon, and L. Looney, J. Mater. Proc. Technol. 143–144, 567 (2003).10.1016/S0924-0136(03)00368-6 ↗
4. J.M. Molina, R. Arpon, R.A. Saravanan, C.C. Garcia, E. Louis, and J. Narciso, Scr. Mater. 51, 623 (2004).10.1016/j.scriptamat.2004.05.009 ↗
5. A. Mortensen and I. Jin, Int. Mater. Rev. 37, 101 (1992).10.1179/imr.1992.37.1.101 ↗
6. T. Maa, H. Yamaura, D.A. Koss, and R.C. Voigt, Mater. Sci. Eng. A 360, 116 (2003).10.1016/S0921-5093(03)00408-8 ↗
7. Y.C. Lin, H.C. Li, S.S. Liou, and M.T. Shie, Mater. Sci. Eng. A 373, 363 (2004).10.1016/j.msea.2004.02.011 ↗
8. M. Taya and R.J. Arsenault, Metal Matrix Composites (Oxford, U.K.: Pergamon Press, 1989), pp. 51–63.
9. M.M. Schwartz, Composite Materials Handbook (New York: McGraw-Hill, 1984).
10. V. Michaud and A. Mortensen, Composites A 32, 981 (2001).10.1016/S1359-835X(01)00015-X ↗
11. A. Alonso, J. Pamies, J. Narciso, C. Garcia-Cordovilla, and E. Louis, Metall. Trans. A 24, 1423 (1993).10.1007/BF02668210 ↗
12. M. Gupta, I.A. Ibrahim, F.A. Mohamed, and E.J. Lavernia, J. Mater. Sci. 26, 6673 (1991).10.1007/BF02402660 ↗
13. M. Gupta, F. Mohamed, E. Lavernia, and T.S. Srivatsan, J. Mater. Sci. 28, 2245 (1993).10.1007/BF00367591 ↗
14. W. Lai Shy and D.D.L. Chung, J. Mater. Chem. 6, 469 (1996).10.1039/JM9960600469 ↗
15. T. Donomoto, K. Funatani, N. Miura, and M. Miyake, Ceramic fiber reinforced piston for high performance diesel engines, Paper No. 830252SAE Technical Paper Series, 1983, pp. 9–1010.4271/830252 ↗
16. M. Ebisawa, T. Hare, T. Hayashi, and H. Ushio, Production process of metal matrix composite (MMC) engine block, Paper No. 910835SAE Technical Paper Series, 1991, pp. 12–1310.4271/910835 ↗
17. V. Michaud and A. Mortensen, Composites A 32, 981 (2001).10.1016/S1359-835X(01)00015-X ↗
18. E. Carreño Morelli, T. Cutard, R. Schaller, and C. Bonjour, Mater. Sci. Eng. A 251, 48 (1998).10.1016/S0921-5093(98)00649-2 ↗
19. M.K. Premkumar, W.H. Hunt, and R.R. Sawtell, JOM 44, 24 (1992).10.1007/BF03222271 ↗
20. W. Moćkol and L. Kowalewski, Appl. Mech. Mater. 82, 166 (2002).10.4028/www.scientific.net/AMM.82.166 ↗
21. S. Elomari, R. Boukhili, S. Marchic, A. Mortensen, and D.J. Lloyd, J. Mater. Sci. 32, 2131 (1997).10.1023/A:1018535108269 ↗
22. A.K. Kuruvilla, V.V. Bhanuprasad, K.S. Prasad, and Y.R. Mahajan, Bull. Mater. Sci. 12, 495 (1989).10.1007/BF02744919 ↗
23. R. Valle, M.H. Vidal Satif, D. Schuster, and P. Le Vacon, Metall. Mater. Trans. A 35, 3307 (2004).10.1007/s11661-004-0072-1 ↗
24. O. Beffort, S. Long, C. Cayron, J. Kuebler, and P.A. Buffat, Sci. Technol. 67, 737 (2007).10.1016/j.compscitech.2006.04.005 ↗
25. M. Montoya-Dávila, M.A. Pech-Canul, and M.I. Pech-Canul, Power. Technol. 176, 66 (2007).10.1016/j.powtec.2007.02.008 ↗
26. Duralcan Composites Casting Guidelines, Duralcan composites mechanical and physical property wrought composites, SI units (San Diego, CA: Duralcan, 1982).
27. V. Michaud and A. Mortensen, Composites A 32, 981 (2001).10.1016/S1359-835X(01)00015-X ↗
28. A.J. Clegg, Cast Metal Matrix Composites (U.K.: The Foundryman).
29. K. Bae Lee, Y.S. Kim, and H. Kwon, Metall. Mater. Trans. A 29, 3087 (1996).
30. W.M. Piet, J.P. Hemptenmacher, and H. Schurmann, Compos. Sci. Technol. 70, 1321 (2010).10.1016/j.compscitech.2010.04.007 ↗
31. G.A. Cooper and A. Kelly, J. Mech. Phys. Solids 15, 279 (1967).10.1016/0022-5096(67)90017-8 ↗
32. E. Kuram and B. Ozcelik, Measure 46, 1849 (2013).
33. M. Nalbant and H.G. Sur Gokkaya, Mater. Des. 28, 1379 (2007).10.1016/j.matdes.2006.01.008 ↗
34. P.J. Ross, Taguchi Techniques for Quality Engineering: Loss Function, Orthogonal Experiments, Parameter and Tolerance Design, 2nd ed. (New York: McGraw-Hill, 1989).
35. S. Basavarajappa and G. Chandramohan, J. Mater. Eng. Perform. 15, 656 (2006).10.1361/105994906X150731 ↗
36. Y.Q. Wang, A.M. Afsar, J.H. Jang, K.S. Han, and J.I. Song, Wear 268, 863 (2010).10.1016/j.wear.2009.11.010 ↗
37. M.A. Azmah Hanim, S. Chang Chung, and O. Khang Chuan, Mater. Des. 32, 2334 (2011).10.1016/j.matdes.2010.12.040 ↗
38. N. Muthukrishnan and J.P. Davmin, J. Mater. Process. Technol. 209, 225 (2009).10.1016/j.jmatprotec.2008.01.041 ↗
39. M. Puviyarasan and V.S. Senthil Kumar, Proc. Eng. 38, 1004 (2012).10.1016/j.proeng.2012.06.138 ↗
40. A. Diler and R. Ipek, Mater. Sci. Eng. A 548, 43 (2012).10.1016/j.msea.2012.03.066 ↗
41. P.J. Ross, Taguchi Techniques for Quality Engineering: Loss Function, Orthogonal Experiments Parameter and Tolerance Design, 2nd ed. (New York: McGraw-Hill, 1989).
42. S. Koksal, F. Ficici, R. Kayikci, and O. Savas, Mater. Des. 42, 124 (2012).10.1016/j.matdes.2012.05.048 ↗