DataVXJOMPaper
journal article·1998-04

Developments in physical chemistry and basic principles

H. Y. Sohn, W. D. Cho

JOM· Volume 50· Issue 4
Publisher page
Bibliographic record

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: Thermal and Kinetic Analysis · Advanced Materials Characterization Techniques · Catalysis and Oxidation Reactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. T. Tanabe, M. Mizoguchi, and Z. Asaki, “Formation Mechanism of Ce-Fe Intermetallic Compounds in Reduction-Diffusion Process,” Metall. Rev. MMIJ, 14 (1997), pp. 13–23.
2. K. Matsuura, T. Kitamura, M. Kudoh, Y. Itoh, and T. Ohmi, “Grain Refinement of Combustion-Synthesized NiAl by Addition of Al2O3 Particles,” ISIJ International, 37 (1997), pp. 87–92.10.2355/isijinternational.37.87 ↗
3. H. Kohno, T. Akiyama, S. Kobayashi, and J. Yagi, “Morphology of Combustion-Synthesized Mg2Ni,” J. Japan Inst. Metals, 61 (1997), pp. 166–170.10.2320/jinstmet1952.61.2_166 ↗
4. J.M. Muñoz-Palo, M.D.C. Cristina, and P. Adeva, “Synthesis of Mg2Si Powder by Mechanical Alloying and Its Consolidation,” Mater. Trans. JIM, 37 (1996), pp. 1602–1606.10.2320/matertrans1989.37.1602 ↗
5. M. Ito, K. Majima, S. Katsuyama, and H. Nagai, “Effect of Milling Atmosphere on the Preparation of Sm2Fe17N x Powder by Mechanical Grinding,” Mater. Trans. JIM, 37 (1996), pp. 1704–1709.10.2320/matertrans1989.37.1704 ↗
6. M. Ito, K. Majima, S. Katsuyama, and H. Nagai, “Preparation of Sm2Fe17N x Anisotropic Powder by Mechanical Grinding in NH3 Atmosphere,” J. Japan Inst. Metals, 61 (1997), pp. 225–234.10.2320/jinstmet1952.61.3_225 ↗
7. H.-C. Yi, A. Varma, A.S. Rogachev, and P.J. McGinn, “Gravity-Induced Microstructural Nonuniformities during Combustion Synthesis of Intermetallic-Ceramic Composite Materials,” Ind. Eng. Chem. Res., 35 (1996), pp. 2982–2985.10.1021/ie950750v ↗
8. D. Kocaefe and R.T. Bui, “A One-Phase Model of the Mixing of Al-SiC Composite Melt,” Metall. Mater. Trans. B, 28B (1997), pp. 1015–1024.
9. F. Margarido, M.O. Figueiredo, A.M. Queiróz, and J.P. Martins, “Acid Leaching of Alloys Within the Quaternary System Fe-Si-Ca-Al,” Ind. Eng. Chem. Res., 36 (1997), pp. 5291–5295.10.1021/ie970295y ↗
10. N. Yuge, K. Hanazawa, K. Nishikawa, and H. Terashima, “Removal of Phosphorus, Aluminum and Calcium by Evaporation in Molten Silicon,” J. Japan Inst. Metals, 61 (1997), pp. 1086–1093.10.2320/jinstmet1952.61.10_1086 ↗
11. A.M. Fudolig, H. Nogami, and J. Yagi, “Prediction of Generation Rates in ‘Reactive Arc Plasma’ Ultrafine Powder Production Process,” ISIJ International, 37 (1997), pp. 641–646.10.2355/isijinternational.37.641 ↗
12. P.R. Taylor and E.E. Vidal, “Gas-Solid Reactions in Thermal Plasma Environments: Synthesis of Non-Oxide Ceramic Powders,” Proceedings of The Julian Szekely Memorial Symposium on Materials Processing, eds. H. Y. Sohn, J. W. Evans, and D. Apelian (Warrendale, PA: TMS, 1997), pp. 119–132.
13. E.M. Lopasso, J.J. Andrade Gamboa, J.M. Astigueta, and D.M. Pasquevich, “Enhancing Effect of Cl2 Atmosphere on Transition Aluminas Transformation,” J. Mater. Sci., 32 (1997), pp. 3299–3304.10.1023/A:1018687725900 ↗
14. L.-C. Lai, S.-Y. Liu, and T.-P. Perng, “Gas-Phase Hydrogenation Properties and Electrode Performance of La(Ni, Al, Co, V)5 Alloys,” Rare Earths: Science, Technology and Applications III, eds. R.G. Bautista et al. (Warrendale, PA: TMS, 1997), pp. 97–106.
15. R.K.F. Lam, “High Purity Titanium Refining by Iodide Purification,” Titanium Extraction and Processing, eds. B. Mishra and G.J. Kipouros (Warrendale, PA: TMS, 1997), pp. 3–22.
16. K.A. Gschneidner, Jr. and V.K. Pecharsky, “Magnetic Refrigeration,” in Ref. 15, pp. 209–221.
17. H.Y. Sohn, “Developments in Gas-Solid Reaction Analysis,” in Ref. 12, pp. 35–65.
18. T. Usui et al., “Kinetic Analyses on the Rate of Gaseous Reduction of Single Particles and Packed Beds of Iron Ore Agglomerates,” in Ref. 12, pp. 67–81.
19. A.A. El-Geassy, “Gaseous Reduction of MgO-Doped Fe2O3 Compacts with Carbon-Monoxide at 1173–1473 K,” ISIJ International, 36 (1996), pp. 1328–1337.10.2355/isijinternational.36.1328 ↗
20. A.A. El-Geassy, “Reduction of CaO and/or MgO-Doped Fe2O3 Compacts with Carbon-Monoxide at 1173–1473 K,” ISIJ International, 36 (1996), pp. 1344–1353.10.2355/isijinternational.36.1344 ↗
21. A.A. El-Geassy, “Stepwise Reduction of CaO and/or MgO-Doped Fe2O3 Compacts to Magnetite then Subsequently to Iron at 1173–1473 K,” ISIJ International, 37 (1997), pp. 844–853.10.2355/isijinternational.37.844 ↗
22. J.A. Bustnes, “Kinetic Studies of the Reduction of FeO and FeWO4 by Hydrogen,” Metall. Mater. Trans. B, 28B (1997), pp. 613–618.10.1007/s11663-997-0033-3 ↗
23. R.G. Reddy and M.V. Klein, “Kinetics of Chromite Reduction with Carbon,” in Ref. 12, pp. 101–118.
24. A. Lekatou and R.D. Walker, “Effect of Sio2 Addition on Solid State Reduction of Chromite Concentrate,” Ironmaking Steelmaking, 24 (1997), pp. 133–143.
25. Y.L. Ding, N.A. Warner, and A.J. Merchant, “Reduction of Chromite by Graphite with CaO-SiO2 Fluxes,” Scandinavian J. Metall., 26 (1997), pp. 55–63.
26. M. Halali and P. Grieveson, “Carbothermic Reduction of Boron Oxide: (I). Kinetics and Reaction Mechanisms,” Scandinavian J. Metall., 26 (1997), pp. 64–73.
27. R. Padilla, M.C. Ruiz, and H.Y. Sohn, “Reduction of Molybdenite with Carbon in the Presence of Lime,” Metall. Mater. Trans. B, 28B (1997), pp. 265–274.10.1007/s11663-997-0093-4 ↗
28. K.M. Riihilahti, H.Y. Sohn, A. Jokilaakso, and M. Pérez-Tello, “Oxidation of Copper Matte Particles under Simulated Flash Converting Conditions,” EPD Congress 1997, ed. B. Mishra (Warrendale, PA: TMS, 1997), pp. 85–105.
29. S. Strömberg, A. Jokilaakso, T. Jokinen, and S. Jyrkönen, “Microscopical Study of Roasted Nickel Concentrates Produced,” in Ref. 28, pp. 271–290.
30. S. Jyrkönen, S. Strömberg, and A. Jokilaakso, “Experimental Study of the Oxidation of Synthetic Nickel Mattes under Simulated Flash Converting Conditions,” Nickel-Cobalt 97, vol. II, Pyrometallurgy Fundamentals and Process Development, eds. C.A. Levac and R.A. Berryman (Montreal, Canada: CIM, 1997), pp. 187–203.
31. A.B. Portov and L. Sh. Tsemekhman, “Heavy Non-Ferrous Metals: Oxidation Kinetics of Nickel Mattes,” Russian J. Non-Ferrous Metals, 37 (3) (1996), pp. 3–9.
32. S.N. Shin, V.M. Chumarev, R.I. Gulyaeva, and V.P. Marychev, “Chemistry and Kinetics of Oxidation of Iron-calcium Oxysulfide,” Russ. Metall. 1 (1997), pp. 44–47.
33. S. Prasad, B.D. Pandey, and S.K. Palit, “Sulphation of Chalcopyrite with Steam and Oxygen in the Presence of Some Additives,” Mater. Trans. JIM, 37 (1996), pp. 1304–1310.10.2320/matertrans1989.37.1304 ↗
34. M. Dell’Amico, W.J. Rankin and D.J. McCarthy, “An Experimental Study of the Reaction of Sulfur Dioxide with Pyrrhotite Produced by Pyrolysis of Pyrite.” in Ref. 12, pp. 153–171.
35. F.C. Gennari, A.E. Bohé, and D.M. Pasquevich, “Iron Removal from Mixtures of Iron-Titanium Oxides Using the Carbochlorination Process,” in Ref. 15, pp. 91–110.
36. I. Gaballah, E. Allain, and M. Djona, “Extraction of Tantalum and Niobium from Tin Slags by Chlorination and Carbochlorination,” Metall. Mater. Trans. B, 28B (1997), pp. 359–370.10.1007/s11663-997-0102-7 ↗
37. M.D.C. Ruiz, J.A. Gonzalez, and J.B. Rivarola, “Carbochlorination of Argentinian Tantalo-Columbites,” Can. Metall. Quart., 36 (1997), pp. 103–110.10.1179/cmq.1997.36.2.103 ↗
38. P.K. Jena, E.A. Brocchi, and R.I. Garcia, “Kinetics of Chlorination of Niobium Pentoxide by Carbon Tetrachloride,” Metall. Mater. Trans. B, 28B (1997), pp. 39–46.10.1007/s11663-997-0125-0 ↗
39. S.B. Kanungo and S.K. Mishra, “Kinetics of Chloridization of Nickel Oxide with Gaseous Hydrogen Chloride,” Metall. Mater. Trans. B, 28B (1997), pp. 371–388.10.1007/s11663-997-0103-6 ↗
40. S.B. Kanungo and S.K. Mishra, “Kinetics of Chloridization of Nickel-Bearing Lateritic Iron Ore by Hydrogen Chloride Gas,” Metall. Mater. Trans. B, 28B (1997), pp. 389–400.10.1007/s11663-997-0104-5 ↗
41. I. Ilié, B. Krstev, K. Cerovié, and S. Stopié, “The Study of Chlorination of Nickel Oxide by Chlorine and Calcium Chloride in the Presence of Active Additives,” Scandinavian J. Metall., 26 (1997), pp. 14–19.
42. R. Padilla, Y. Fan, M. Sánchez, and I. Wilkomirsky, “Arsenic Volatilization from Enargite Concentrate,” in Ref. 28, pp. 73–83.
43. S.A. Pirzada, M. Manrique, and P.R. Taylor, “High-Temperature, In-Flight Conversion of Alumina to Sodium Aluminate,” Minerals Metall. Processing, 14 (8) (1997), pp. 8–12.
44. A. Maciel-Camacho, H. Rodriguez Hemández, A.W.D. Hills, and R.D. Morales, “Hydration Kinetics of Lime,” ISIJ International, 37 (1997), pp. 468–476.10.2355/isijinternational.37.468 ↗
45. A. Maciel-Camacho, H. Rodriguez Hemández, A.W.D. Hills, and R.D. Morales, “Hydration Kinetics of Recarbonized Lime,” ISIJ International, 37 (1997), pp. 477–483.10.2355/isijinternational.37.477 ↗
46. I. Arvanitidis, D. Sichen, H.Y. Sohn, and S. Seetharaman, “The Intrinsic Thermal Decomposition Kinetics of SrCO3 by a Nonisothermal Technique,” Metall. Mater. Trans. B, 28B (1997), pp. 1063–1068.10.1007/s11663-997-0060-0 ↗
47. X. Xiao, D. Sichen, H.Y. Sohn, and S. Seetharaman, “Determination of Kinetic Parameters Using Differential Thermal Analysis—Application to the Decomposition of CaCO3,” Metall. Mater. Trans. B, 28B (1997), pp. 1157–1164.10.1007/s11663-997-0072-9 ↗
48. I. Arvanitidis, D. Sichen, H.Y. Sohn, and S. Seetharaman, “The Intrinsic Thermal Decomposition Kinetics of Some Alkaline-Earth Carbonates,” in Ref. 12, pp. 133–151.
49. C.P. Petit and R.J. Fruehan, “Influence of Chromium and Nickel on the Dissociation of CO2 on Carbon-Saturated Liquid Iron,” Metall. Mater. Trans. B, 28B (1997), pp. 639–646.10.1007/s11663-997-0037-z ↗
50. M. Ahmadi Najafabadi, M. Hirasawa, and M. Sano, “Deoxidation of Iron Melt with Immersed MgO-C Porous Tube,” ISIJ International, 36 (1996), pp. 1366–1372.10.2355/isijinternational.36.1366 ↗
51. M. Ahmadi Najafabadi, M. Hirasawa, and M. Sano, “Decarburization of Iron Melt by an Immersed Al2O3-Fe2O3 Porous Tube,” ISIJ International, 37 (1997), pp. 31–37.10.2355/isijinternational.37.31 ↗
52. V. Seshadri, C.A. da Silva, I.A. da Silva, and P. von Krüger, “A Kinetic Model Applied to the Molten Pig Iron Desulfurization by Injection of Lime-Based Powders,” ISIJ International, 37 (1997), pp. 21–30.10.2355/isijinternational.37.21 ↗
53. S.A. Argyropoulos and P.G. Sismanis, “The Solution Kinetics of Zirconium in Liquid Steel,” Steel Research, 68 (1997), pp. 345–354.10.1002/srin.199700564 ↗
54. H.G. Park and R. Abbaschian, “Absorption Kinetics and Mechanisms of Carbon Monoxide in Liquid Niobium,” Metall. Mater. Trans. B, 28B (1997), pp. 455–464.10.1007/s11663-997-0112-5 ↗
55. T. Utigard et al., “Reduction Kinetics of Liquid Iron Oxide-Containing Slags by Carbon Monoxide,” Metall. Mater. Trans. B, 28B (1997), pp. 821–826.10.1007/s11663-997-0009-3 ↗
56. R.K. Paramguru, R.K. Galgali, and H.S. Ray, “Influence of Slag and Foam Characteristics on Reduction of FeO-Containing Slags by Solid Carbon,” Metall. Mater. Trans. B, 28B (1997), pp. 805–810.10.1007/s11663-997-0007-5 ↗
57. H. Ono, K. Morita, and N. Sano, “Kinetic Studies on the Dissolution of Nitrogen in CaO-Al2O3, CaO-SiO2, and CaO-CaF2 Melts,” Metall. Mater. Trans. B, 28B (1997), pp. 633–638.10.1007/s11663-997-0036-0 ↗
58. T.H. Okabe, T. Uda, E. Kasai, and Y. Waseda, “Mechanism of Magnesiothermic Reduction of TiCl4 by an Electronically Mediated Reaction (EMR),” in Ref. 15, pp. 234–258.
59. T.H. Okabe, T. Uda, E. Kasai, and Y. Waseda, “Reaction Pathways during Metallothermic Reduction of TiCl4 by Utilizing Chemical Potential Diagrams,” in Ref. 15, pp. 133–151.
60. T.H. Okabe, T. Uda, E. Kasai, and Y. Waseda, “Phase Equilibria and Reaction Pathways during Ti Reduction by Magnesium and Sodium Involving Electronically Mediated Reaction,” J. Japan Inst. Metals, 61 (1997), pp. 610–618.10.2320/jinstmet1952.61.7_610 ↗
61. S. Itoh and T. Azakami, “Direct Reduction and Distillation of Zinc Sulfide with Metallic Iron,” Metall. Rev. MMIJ, 13 (1996), pp. 37–51.
62. V.V. Mechev, “Polymorphism of Copper Sulfides and Reactivity of Cu2O-Cu2-xS,” Russ. Metall. (2) (1997), pp. 7–11.
63. M.E. Schlesinger, “Refractories for Copper Production,” Mineral Processing & Extractive Metallurgy Review, 13 (1996), pp. 125–146.10.1080/08827509608914131 ↗
64. N. Choi and W.D. Cho, “Distribution Behavior of Cobalt, Selenium, and Tellurium between Nickel-Copper-Iron Matte and Silica-Saturated Iron Silicate Slag,” Metall. Mater. Trans. B, 28B (1997), pp. 429–438.10.1007/s11663-997-0109-0 ↗
65. R.U. Pagador, M. Hino, and K. Itagaki, “Dissolution of Nickel and Copper in FeOx-SiO2-MgO Slag Equilibrated with Nickel Alloy,” Metall. Rev. MMIJ, 13 (1996), pp. 90–103.
66. R.U. Pagador, M. Hino, and K. Itagaki, “Equilibrium between FeOx-MgO-SiO2 Slag and Nickel Alloy,” in Ref. 30, pp. 63–75.
67. G. Roghani, M. Hino, K. Itagaki, “Phase Equilibrium between Calcium Ferrite Slag and Copper Matte at 1523 K under High Partial Pressures of SO2,” Mater. Trans. JIM, 37 (1996), pp. 1431–1437.10.2320/matertrans1989.37.1431 ↗
68. G. Roghani, J.C. Font, M. Hino, and K. Itagaki, “Distribution of Minor Elements between Calcium Ferrite Slag and Copper Matte at 1523 Kunder High Partial Pressure of SO2,” Mater. Trans. JIM, 37 (1996), pp. 1574–1579.10.2320/matertrans1989.37.1574 ↗
69. D.R. Swinbourne, G.G. Barbante, and W.J. Rankin, “Oxidation of Silver-Copper Selenide Matte in Copper-Anode Slimes Smelting,” Trans. Instn Min. Metall., 106 (1997), pp. C1-C8.
70. M. Soltanieh, J.M. Toguri, and R. Sridhar, “The Liquidus Surface and Tie-Lines in the Iron-Cobalt-Sulfur Systems between 1473 and 1623K,” Metall. Mater. Trans. B, 28B (1997), pp. 647–650.10.1007/s11663-997-0038-y ↗
71. F. Kongoli and A.D. Pelton, “Thermochemical Modeling of Ni-Co-Cu-Fe-S Mattes for the Simulation of Ni/Co Smelting Processes,” in Ref. 30, pp. 267–281.
72. V.A. Bryukvin and A.V. Parygin, “Thermodynamic Properties of Cobalt Oxysulphide Melts,” in Ref. 30, pp. 357–366.
73. M. Selleby, “An Assessment of the Fe-O-Si System.” Metall. Mater. Trans. B, 28B (1997), pp. 563–576.10.1007/s11663-997-0029-z ↗
74. M. Selleby, “An Assessment of the Ca-Fe-O-Si System,” Metall. Mater. Trans. B, 28B (1997), pp. 577–598.10.1007/s11663-997-0030-6 ↗
75. D.K. Belashchenko and O.I. Ostrovskii, “Computer-Aided Calculation of Ti3+ and Ti4+ Ion Distribution in Solutions of CaO-SiO2 System,” Russ. Metall. No. 2 (1997), pp. 42–48.
76. X. Xing, Z. Qiao, and S. Wei, “Thermodynamic Properties of Complex Oxides in the Sm- Ba-Cu-O System,” Metall. Mater. Trans. B, 27B (1996), pp. 973–978.10.1007/s11663-996-0011-1 ↗
77. J.-H. Shim, C.-S. Oh, and D.N. Lee, “A Thermodynamic Evaluation of the Ti-Mo-C System,” Metall. Mater. Trans. B, 27B (1996), pp. 955–966.10.1007/s11663-996-0009-8 ↗
78. B.R. Davis and W.T. Thompson, “Thermodynamic Properties of Magnesium Chloride Electrolytes,” Light Metals 1997, eds. C.M. Bickert and R.I.L. Guthrie (Montreal, Canada: CIM, 1997), pp. 557–566.
79. B.R. Davis, W.T. Thompson, and P. Ficara, “Physical Properties of Magnesium Chloride Electrolytes,” Light Metals 1997, eds., C.M. Bickert and R.I.L. Guthrie (Montreal, Canada: CIM, 1997), pp. 567–578.
80. C.E. Cicutti, J. Madias, and J.C. González, “Control of Microinclusions in Calcium Treated Aluminium Killed Steels,” Ironmaking Steelmaking, 24 (1997), pp. 155–159.
81. H. Ishii and R.J. Fruehan, “Dephosphorization Equilibria between Liquid Iron and Highly Basic CaO-Based Slags Saturated with MgO,” Iron Steelmaker, 24 (2) (1997), pp. 47–54.
82. P.K. Iwamasa and R.J. Fruehan, “Effect of FeO in the Slag and Silicon in the Metal on the Desulfurization of Hot Metal,” Metall. Mater. Trans. B, 28B (1997), pp. 47–58.10.1007/s11663-997-0126-z ↗
83. V.I. Antonenko, D.Ya. Povolotskii, D.N. Sonnov, and L.V. Senatos, “A Thermodynamic Analysis of Sulfur Partition between Steel and Slag Based on the Thermostatic Theory of Ionic Solutions,” Russ. Metall. No. 2 (1997), pp. 1–6.
84. R.G. Reddy and S.R. Reddy, “Thermodynamic Modeling of Molten Metal Systems,” Emerging Separation Technologies for Metals II, ed. R.G. Bautista (Warrendale, Pennsylvania: TMS, 1996), pp. 17–34.
85. H.G. Kim and H.Y. Sohn, “Minor-Element Behavior and Iron Partition during the Cleaning of Copper Converter Slag under Reducing Conditions,” Can. Metall. Quart., 36 (1997), pp. 31–37.10.1179/cmq.1997.36.1.31 ↗
86. H.G. Kim and H.Y. Sohn, “Thermodynamic Modelling of Minor-Element Behaviour in In-Bath Copper Smelting and Converting with Calcium Ferrite Slag,” Trans. Instn. Min. Metall., 105 (1996), pp. C151-C163.
87. D.R. Swinbourne, A. Yazawa, and G.G. Barbante, “Thermodynamic Modeling of Selenide Matte Converting,” Metall. Mater. Trans. B, 28B (1997), pp. 811–820.10.1007/s11663-997-0008-4 ↗
88. M.H.I. Baird, P.G. Moruzi, S.W. Marcuson, and C.M. Diaz, “Mixing and Mass Transfer in a Cold Model of a Semi-Blister Copper Converter,” Nickel-Cobalt 97, Vol. III, Pyrometallurgical Operations, the Environment and Vessel Integrity in Nonferrous Smelting and Converting, eds. C. Diaz, I. Holubec, and C.G. Tan (Montreal, Canada: CIM, 1997), pp. 441–453.
89. J. Yagi, R. Takahashi, T. Akiyama, and X. Zhang, “Numerical Analysis of a Moving Bed Reactor for Iron Scrap Melting,” in Ref. 12, pp. 83–100.
90. V. Panjkovic, O. Ostrovski, J. Truelove, and C.C. Clark, “Mathematical Modelling of the Smelting Reduction of Iron: The Effect of Properties of Raw Materials and Blast Injection,” The Howard Worner International Symposium on Injection in Pyrometallurgy, eds. M. Nilmani and T. Lehner (Warrendale, Pennsylvania: TMS, 1996), pp. 399–413.
91. F. Veglió and F. Beolchini, “Removal of Metals by Biosorption: A Review,” Hydrometallurgy, 44 (1997), pp. 301–316.10.1016/S0304-386X(96)00059-X ↗
92. R. Dasgupta, Y.C. Guan, and K.N. Han, “The Electrochemical Behavior of Gold in Ammoniacal Solutions at 75%C,” Metall. Mater. Trans. B, 28B (1997), pp. 5–12.10.1007/s11663-997-0121-4 ↗
93. D. Mussatti, J. Mager, and G.P. Martins, “Electrochemical Aspects of the Dissolution of Gold in Cyanide Electrolytes Containing Lead,” Aqueous Electrotechnologies: Progress in Theory and Practice, ed. D.B. Dreisinger (Warrendale, Pennsylvania: TMS, 1997), pp. 247–265.
94. L.M. Abrantes and M.C. Costa, “Electro-Oxidation as a Pre-Treatment for Gold Recovery,” Hydrometallurgy, 40 (1996), pp. 99–110.10.1016/0304-386X(94)00077-G ↗
95. F.K. Crundwell and S.A. Godorr, “A Mathematical Model of the Leaching of Gold in Cyanide Solutions,” Hydrometallurgy, 44 (1997), pp. 147–162.10.1016/S0304-386X(96)00039-4 ↗
96. J.M. Chimenos, M. Segarra, L. Guzman, A. Karagueorguieva, and F. Espiell, “Kinetics of the Reaction of Gold Cyanidation in the Presence of a Thallium(I) Salt,” Hydrometallurgy, 44 (1997), pp. 269–286.10.1016/S0304-386X(96)00063-1 ↗
97. X. Meng and K.N. Han, “Dissolution Kinetics of Gold in Moderate Aqueous Potassium Iodide Solutions with Oxygen under Pressure,” Minerals Metall. Processing, 14 (May) (1997), pp. 1–9.
98. I. Maudos, J.M. Chimenos, M. Segarra, and F. Espiell, “Kinetic Study of Silver Chloride Dissolution in Complexating Media,” Hydrometallurgy, 40 (1996), pp. 153–167.10.1016/0304-386X(94)00083-F ↗
99. K. Lambrinou and P. Neou-Syngouna, “Behavior of Silver during FeCl3-Leaching of a Complex Sulfide Ore,” Erzmetall, 50 (1997), pp. 52–59.
100. R. Padilla, D. Lovera, and M.C. Ruiz, “Leaching of Chalcopyrite in CuCl-NaCl-O2 System,” in Ref. 28, pp. 167–177.