Desktop printing of 3D thermoplastic polyurethane parts with enhanced mechanical performance using filaments with varying stiffness
Source abstract
Abstract
Abstract 3D printing polymers via fused filament fabrication (FFF) exhibits significant advantages such as low cost and high efficiency, thus FFF has become one of the most popular production methods in the 3D printing field. For a printing using a soft filament feedstock, it is important to understand how to optimize its fabrication process when attempting to improve the packing morphology of deposited melt strand and thus enhance the mechanical performance. This work intends to be a step forward obtaining a strategy for high-quality FFF printing without compromising printing efficiency for those filaments with low stiffness as well as low feeding stress. Using a commercial desktop printer, a facile method to reduce the porosity of FFF-printed thermoplastic polyurethane (TPU) parts was proposed by controlling printing parameters using specific TPU filaments with varying hardness. Tensile strength and tear resistance of the printed parts were measured to assess the optimization printing (OP) strategy. Owing to the significant reduction of porosity, less thermal degradation and higher molecular orientation in FFF, the tensile strength and tear resistance of the OP-printed parts were approximately 95% and 126.8% of those of parts fabricated via injection molding, respectively. Compared with the standard printing (SP) method, OP strategy was found to be effective in improving mechanical performance. The mechanism was then analyzed in terms of nozzle moving trajectory and filament loading ratio, with particular emphasis on feedstock in the continuity and stability of melt strand deposition. In addition, the correlation between residual porosity and mechanical performance of FFF-printed parts was established, providing direction for overcoming the practical limitations of FFF printing, thus paving a way to print high-quality elastomeric materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · 3D Printing in Biomedical Research · Advanced Sensor and Energy Harvesting Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. FDM process parameters influence over the mechanical properties of polymer specimens: a review10.1016/j.polymertesting.2018.05.020 ↗
2. Additive manufacturing at industry 4.0: a review
3. Making sense of 3D printing: creating a map of additive manufacturing products and services
4. Additive manufacturing and sustainability: an exploratory study of the advantages and challenges10.1016/j.jclepro.2016.04.150 ↗
5. In-situ X-ray scattering study of isotactic polypropylene/graphene nanocomposites under shear during fused deposition modeling 3D printing10.1016/j.compscitech.2020.108227 ↗
6. The effect of interlayer cooling on the mechanical properties of components printed via fused deposition
7. In situ time-resolved X-ray scattering study of isotactic polypropylene in additive manufacturing10.1021/acsami.9b12908 ↗
8. Simultaneous in-situ X-ray scattering and infrared imaging of polymer extrusion in additive manufacturing10.1021/acsapm.9b00328 ↗
9. Design of a low-cost, high-temperature inverted build environment to enable desktop-scale additive manufacturing of performance polymers
10. The effects of voids on structural properties of fused deposition modeled parts: a probabilistic approach10.1007/s00170-018-2148-x ↗
11. ZigZagZ: Improving mechanical performance in extrusion additive manufacturing by nonplanar toolpaths
12. Effect of vacuum-assisted fused deposition modeling on 3D printed ABS microstructure
13. B. Vasudevarao, D.P. Natarajan, A. Razdan, H. Mark, Sensitivity of RP surface finish to process parameter variation, in: Proceedings of Solid Free Form Fabrication, Austin, USA, 2000, pp. 252–258.
14. Influence of printing parameters on the stability of deposited beads in fused filament fabrication of poly (lactic) acid
15. Parametric appraisal of mechanical property of fused deposition modelling processed parts10.1016/j.matdes.2009.06.016 ↗
16. An investigation into 3D printing of fiber reinforced thermoplastic composites
17. Experimental analysis of the tensile property of FFF-printed elastomers10.1016/j.polymertesting.2020.106687 ↗
18. What makes a material printable? A viscoelastic model for extrusion-based 3D printing of polymers10.1016/j.jmapro.2018.08.008 ↗
19. Can the melt flow index be used to predict the success of fused deposition modelling of commercial poly (lacticacid) filaments into 3D printed materials?10.1080/14658011.2017.1397308 ↗
20. Grafting poly(methyl methacrylate) (PMMA) from cork via atom transfer radical polymerization (ATRP) towards higher quality of three-dimensional (3D) printed PMMA/cork-g-PMMA materials10.3390/polym12091867 ↗
21. 3D printed cork/polyurethane composite foams10.1016/j.matdes.2019.107905 ↗
22. Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites10.1016/j.compositesa.2016.05.032 ↗
23. 3D printed thermoplastic polyurethane filled with polyurethane foams residues10.1007/s10924-020-01705-y ↗
24. High-strength stereolithographic 3D printed nanocomposites: graphene oxide metastability10.1021/acsami.6b16174 ↗
25. Failure analysis and mechanical characterization of 3D printed ABS with respect to layer thickness and orientation10.1007/s11668-016-0113-2 ↗
26. Anisotropic damage inferred to 3D printed polymers using fused deposition modelling and subject to severe compression10.1016/j.eurpolymj.2016.10.030 ↗
27. Anisotropic material properties of fused deposition modelling ABS10.1108/13552540210441166 ↗
28. Preliminary design and analysis of tensile test samples developed by additive manufacturing10.1016/j.proeng.2015.12.489 ↗
29. T. Letcher, B. Rankouhi, S. Javadpour, Experimental study of mechanical properties of additively manufactured ABS plastic as a function of layer parameters, in: Proceedings of the ASME 2015 International Mechanical Engineering Congress and Exposition IMECE2015, Houston Texas, 2015. 〈https://doi.org/10.1115/IMECE2015–52634〉.10.1115/IMECE2015-52634 ↗
30. Dimensional considerations on the mechanical properties of 3D printed polymer part10.1016/j.polymertesting.2020.106656 ↗
31. Mechanical property optimization of FDM PLA in shear with multiple objectives
32. An approach for mechanical property optimization of fused deposition modeling with polylactic acid via design of experiments10.1108/RPJ-07-2014-0083 ↗
33. Process-induced morphological features in material extrusion-based additive manufacturing of polypropylene
34. Experimental optimization of fused deposition modelling processing parameters: a design-for-manufacturing approach10.1016/j.promfg.2017.07.079 ↗
35. The impact of process parameters on mechanical properties of parts fabricated in PLA with an open-source 3-D printer10.1108/RPJ-09-2014-0135 ↗
36. Experimental characterization and analytical modelling of the mechanical behaviour of fused deposition processed parts made of ABS-M3010.1016/j.commatsci.2013.06.041 ↗
37. Multiplane fused deposition modeling: a study of tensile strength10.1080/15397734.2019.1596127 ↗
38. A method for predicting geometric characteristics of polymer deposition during fused-filament-fabrication
39. Recent progress of enantioseparation under scale production (2014-2019)10.1002/jssc.201900682 ↗
40. Feedstock material property-process relationships in fused deposition of ceramics (FDC)10.1108/13552540010373344 ↗
41. Direct coupling of fixed screw extruders using flexible heated hoses for FDM printing of extremely soft thermoplastic elastomers10.1007/s40964-019-00088-4 ↗
42. Thermal degradation of MDI-based segmented polyurethanes10.1002/(SICI)1099-0518(19991115)37:22<4126::AID-POLA11>3.0.CO;2-A ↗
43. Degradation of MDI-based polyether and polyester-polyurethanes in various environments - effects on molecular mass and crosslinking10.1016/j.polymertesting.2019.04.028 ↗
44. Degradation and stabilization of polyurethane elastomers10.1016/j.progpolymsci.2018.12.003 ↗