journal article·2018-05

Understanding grain evolution in additive manufacturing through modeling

Javed Akram, Pradeep Chalavadi, Deepankar Pal, Brent Stucker

Publisher page

Abstract

Abstract Variability in the mechanical properties of additively manufactured metal parts is a key concern for their application in service. One of the parameters affecting the above-mentioned property is solidification texture which is driven by scan patterns and other process variables. Understanding of how these textures arise in the AM process can provide a pathway to control these features which ultimately decide the final structural material properties. In this work, a Cellular Automata (CA) based two-dimensional microstructure model is formulated and implemented to understand grain evolution in AM. Grain evolution in multilayer depositions using various scan patterns in Directed Energy Deposition (DED), Metal Laser Sintering/Selective Laser Melting (MLS/SLM), and Electron Beam Melting (EBM) is presented and qualitatively compared with reported literature. Results show strong correlation of scan patterns with evolving grain orientations. Variability in grain size and orientation evolution during SLM and EBM processing of metallic materials showed direct influence by exposure to different cooling rates and thermal gradients. The similarities between the simulated and reported results lead us to conclude CA based modeling for predicting grain orientation and size in metal AM processes is useful for prediction of continuum level structural properties at global and local length scales.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Gibson · 2015
2. The metallurgy and processing science of metal additive manufacturing10.1080/09506608.2015.1116649 ↗
3. Laser additive manufacturing of metallic components: materials, processes and mechanisms10.1179/1743280411Y.0000000014 ↗
4. Metal additive manufacturing: a review10.1007/s11665-014-0958-z ↗
5. Overview of materials qualification needs for metal additive manufacturing10.1007/s11837-015-1810-0 ↗
6. Anisotropic tensile behavior of Ti – 6Al – 4V components fabricated with directed energy deposition additive manufacturing10.1016/j.actamat.2014.12.054 ↗
7. Review of mechanical properties of Ti-6Al-4V made by laser-based additive manufacturing using powder feedstock10.1007/s11837-015-1759-z ↗
8. Origin of grain orientation during solidification of an aluminum alloy10.1016/j.actamat.2016.05.057 ↗
9. Understanding Ti-6Al-4V microstructure control in additive manufacturing via process maps
10. Correlation between solidification parameters and weld microstructures10.1179/imr.1989.34.1.213 ↗
11. Microstructural and texture development in direct laser fabricated IN71810.1016/j.matchar.2013.12.012 ↗
12. Study on the microstructure, mechanical property and residual stress of SLM Inconel-718 alloy manufactured by differing island scanning strategy10.1016/j.optlastec.2015.07.009 ↗
13. The influence of the laser scan strategy on grain structure and cracking behaviour in SLM powder-bed fabricated nickel superalloy10.1016/j.jallcom.2014.06.172 ↗
14. A study of the microstructural evolution during selective laser melting of Ti-6Al-4V10.1016/j.actamat.2010.02.004 ↗
15. Evolution of solidification texture during additive manufacturing10.1038/srep16446 ↗
16. Effects of laser modes on Nb segregation and Laves phase formation during laser additive manufacturing of nickel-based superalloy10.1016/j.matlet.2016.10.118 ↗
17. Dendritic microstructure and hot cracking of laser additive manufactured Inconel 718 under improved base cooling10.1016/j.jallcom.2016.01.250 ↗
18. Application of finite element, phase-field, and CALPHAD-based methods to additive manufacturing of Ni-based superalloys10.1016/j.actamat.2017.05.003 ↗
19. On the primary spacing and microsegregation of cellular dendrites in laser deposited Ni-Nb alloys
20. Simulation of metal additive manufacturing microstructures using kinetic Monte Carlo10.1016/j.commatsci.2017.03.053 ↗
21. Numerical modeling of microstructure evolution during laser additive manufacturing of a nickel-based superalloy10.1016/j.actamat.2014.05.039 ↗
22. Evolution of grain structure during laser additive manufacturing. Simulation by a cellular automata method10.1016/j.matdes.2016.05.125 ↗
23. Determination and controlling of grain structure of metals after laser incidence: theoretical approach10.1038/srep41527 ↗
24. Microstructural modelling of dynamic recrystallisation using an extended cellular automaton approach10.1016/S0927-0256(01)00211-7 ↗
25. Numerical modeling of solidification morphologies and segregation patterns in cast dendritic alloys10.1016/S1359-6454(99)00325-0 ↗
26. Modified cellular automaton model for the prediction of dendritic growth with melt convection10.1103/PhysRevE.69.061610 ↗
27. Formation and control of martensite in Ti-6Al-4V alloy produced by selective laser melting10.1016/j.matdes.2016.06.117 ↗
28. Electron backscatter diffraction analysis of Inconel 718 parts fabricated by selective laser melting additive manufacturing10.1007/s11837-016-2198-1 ↗
29. Densification and microstructural investigation of Inconel 718 parts fabricated by selective laser melting10.1016/j.powtec.2017.01.030 ↗
30. The origin of microstructural diversity, texture, and mechanical properties in electron beam melted Ti-6Al-4V10.1007/s11661-010-0397-x ↗
31. Electron beam melted Ti – 6Al – 4V: microstructure, texture and mechanical behavior of the as-built and heat-treated material10.1016/j.msea.2015.11.052 ↗
32. Effect of build geometry on the β-grain structure and texture in additive manufacture of Ti-6Al-4V by selective electron beam melting10.1016/j.matchar.2013.07.012 ↗