journal article·2016-04

Abrasive Fluidized Bed (AFB) finishing of AlSi10Mg substrates manufactured by Direct Metal Laser Sintering (DMLS)

E. Atzeni, M. Barletta, F. Calignano, L. Iuliano, G. Rubino, V. Tagliaferri

Publisher page

Abstract

Abstract This work explores the feasibility of using the Abrasive Fluidized Bed (AFB) method to finish flat AlSi10Mg substrates manufactured by Direct Metal Laser Sintering (DMLS). Finishing was performed by rotating the substrates inside a fluidized bed of abrasives at high speeds. The interaction between the fluidized abrasives and AlSi10Mg substrates has been investigated to analyze the influence of the operational parameters, namely, abrasive type and rotational speed, on the finishing performance. The morphological features of the substrates and geometrical tolerances have been inspected by field emission gun–scanning electron microscopy (FEG–SEM) and contact gauge profilometry. After short finishing cycles, the substrates featured a smoother surface morphology, while the edges were only influenced slightly by the abrasive impacts. Abrasive Fluidized Bed (AFB) can therefore be considered a potential easy-to-automate, low cost, low time consuming and sustainable finishing technology for metal parts obtained through additive manufacturing.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Laser Material Processing Techniques · Advanced machining processes and optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Redesign and cost estimation of rapid manufactured plastic parts10.1108/13552541011065704 ↗
2. Economics of additive manufacturing for end-usable metal parts10.1007/s00170-011-3878-1 ↗
3. Additive manufacturing: a framework for implementation10.1016/j.ijpe.2013.07.008 ↗
4. Direct Metal Laser Sintering: an additive manufacturing technology ready to produce lightweight structural parts for robotic applications
5. Wohlers, Wohlers Report 2014—3D Printing and Additive Manufacturing State of the Industry Annual Worldwide Progress Report, 2014.
6. Surface roughness analysis: modelling and prediction in selective laser melting10.1016/j.jmatprotec.2012.11.011 ↗
7. E. Atzeni, A. Salmi, M. Incontro, A DoE approach for evaluating the quality of self-supporting faces in DMLS, in: 4th International Conference on Additive Technologies (iCAT 2012), D. International, Editor (2012) Maribor, Slovenia.
8. Surface quality in selective laser melting of metal powders
9. Influence of process parameters on surface roughness of aluminum parts produced by DMLS10.1007/s00170-012-4688-9 ↗
10. Finishing performance of cooling channel with face protuberance inside the molding die10.1016/j.jmatprotec.2012.05.016 ↗
11. The effect of ultrapolish on a transonic axial rotor10.1115/1.4006496 ↗
12. Taguchi optimization of the surface finish obtained by laser ablation on selective laser molten steel parts10.1016/j.procir.2013.09.079 ↗
13. Manufacturing by combining selective laser melting and selective laser erosion/laser re-melting10.1016/j.cirp.2011.03.063 ↗
14. Part and material properties in selective laser melting of metals
15. Laser polishing of parts built up by selective laser sintering10.1016/j.ijmachtools.2007.01.013 ↗
16. Improvement of surface properties of SLM parts by atmospheric plasma spraying coating10.1016/j.apsusc.2012.09.170 ↗
17. Progress in abrasive fluidized bed machining10.1016/j.jmatprotec.2009.04.009 ↗
18. A new technology in surface finishing: fluidized bed machining (FBM) of aluminium alloys10.1016/j.jmatprotec.2005.11.020 ↗
19. EOS, EOS M 270 Operation Manual, Munich, Germany: EOS GmbH, 2009.
20. Fluidization and mapping of regimes
21. Material removal mechanisms in lapping and polishing10.1016/S0007-8506(07)60207-8 ↗
22. An investigation of material removal mechanisms in lapping with grain size transition10.1115/1.1286471 ↗
23. Study of the surface modification resulting from an internal magnetic abrasive finishing process
24. Springback control in sheet metal bending by laser-assisted bending: experimental analysis, empirical and neural network modelling10.1016/j.optlaseng.2011.07.010 ↗