journal article·2016-04Open access

Influence of energy density on flexural properties of laser-sintered UHMWPE

Yas Khalil, Adam Kowalski, Neil Hopkinson

Abstract

Ultra High Molecular Weight Polyethylene (UHMWPE) is a semi-crystalline polymer that has remarkable properties of high mechanical properties, excellent wear resistance, low friction and chemical resistance, and it is found in many applications such sporting goods, medical artificial joints, bullet proof jackets and armours, ropes and fishing lines [1]. UHMWPE parts cannot be produced easily by many conventional processes because of its very high melt viscosity resulting from its very long chains [2]. Additive Manufacturing (AM) is moving from being an industrial rapid prototyping process to becoming a mainstream manufacturing process in a wide range of applications. Laser sintering of polymers is one of the AM techniques that is most promising process owing to its ability to produce parts with complex geometries, accurate dimensions, and good mechanical strength [3]. This paper reports attempts to laser-sinter UHMWPE and assesses the effects of laser energy density on the flexural properties of the sintered parts. The properties of the UHMWPE sintered parts were evaluated by performing flexural three point bending tests and were compared in terms of flexural strength, flexural modulus and ductility (deflection). Part dimensions and relative density were evaluated in order to optimise the laser sintering parameters. Thermal analysis of samples was made by differential scanning calorimetry (DSC) for the virgin powder. Results show that flexural strength, modulus and ductility are influenced by laser energy density and flexural strength and modulus of 1.37 MPa and 32.12 MPa respectively are still achievable at a lower laser energy density of 0.016 J/mm2 (Laser power of 6 W). Part dimensions and bulk density are also influenced by laser energy density.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Orthopaedic implants and arthroplasty · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Correlation among powder morphology: compactability, and mechanical properties of consolidated nascent UHMWPE10.1002/app.32346 ↗
2. Micro ultrasonic powder molding for semi-crystalline polymers10.1088/0960-1317/24/4/045014 ↗
3. Performance limitations in polymer laser sintering10.1016/j.phpro.2014.08.157 ↗
4. ISO/ASTM Standard 52900, · 2015
5. An empirical study into laser sintering of ultra-high molecular weight polyethylene (UHMWPE)10.1016/j.jmatprotec.2009.08.016 ↗
6. Hopkinson · 2006
7. Kurtz · 2009
8. Abrasive wear of HDPE/UHMWPE blends10.1016/j.wear.2011.01.011 ↗
9. Kelly · 2012
10. Study on molding process of UHMWPE microporous filter materials10.1002/app.36750 ↗
11. Selective laser sintering of ultra high molecular weight polyethylene for clinical applications10.1002/1097-4636(2000)53:4<414::AID-JBM16>3.0.CO;2-M ↗
12. Advances in modeling the effects of selected parameters on the SLS processnull10.1108/13552549810210257 ↗
13. Microstructural origin of physical and mechanical properties of polyamide 12 processed by laser sintering10.1016/j.eurpolymj.2012.06.007 ↗
14. Densification of alumina components via indirect selective laser sintering combined with isostatic pressing10.1007/s00170-012-4668-0 ↗
15. Assessment of non-uniform shrinkage in the laser sintering of polymer materials10.1007/s00170-012-4712-0 ↗
16. Compensation of non-linear shrinkage of polymer materials in selective laser sintering
17. Influence of building strategies on the accuracy of parts in selective laser sintering10.1016/j.matdes.2009.01.009 ↗
18. Determination of optimal build direction for different rapid prototyping applications
19. Process repeatability and sources of error in indirect SLS of aluminium10.1108/13552540810862073 ↗
20. Dependence of mechanical properties of polyamide components on build parameters in the SLS process10.1016/j.jmatprotec.2006.09.007 ↗