journal article·2022-07Open access

Characterization of a 30 µm pixel size CLIP-based 3D printer and its enhancement through dynamic printing optimization

Brian J. Lee, Kaiwen Hsiao, Gabriel Lipkowitz, Tim Samuelsen, Lee Tate, Joseph M. DeSimone

Abstract

Resolving microscopic and complex 3D polymeric structures while maintaining high print speeds in additive manufacturing has been challenging. To achieve print precision at micrometer length scales for polymeric materials, most 3D printing technologies utilize the serial voxel printing approach that has a relatively slow print speed. Here, a 30-µm-resolution continuous liquid interface production (CLIP)-based 3D printing system for printing polymeric microstructures is described. This technology combines the high-resolution from projection microstereolithography and the fast print speed from CLIP, thereby achieving micrometer print resolution at x103 times faster than other high-resolution 3D printing technologies. Print resolutions in both lateral and vertical directions were characterized, and the printability of minimum 30 µm features in 2D and 3D has been demonstrated. Through dynamic printing optimization, a method that varies the print parameters (e.g. exposure time, UV intensity, and dark time) for each print layer, overhanging struts at various thicknesses spanning 1 order of magnitude (25 µm - 200 µm) in a single print are resolvable. Taken together, this work illustrates that the micro-CLIP 3D printing technology, in combination with dynamic printing optimization, has the high resolution needed to enable manufacturing of exquisitely detailed and gradient 3D structures, such as terraced microneedle arrays and micro-lattice structures, while maintaining high print speeds.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Nanomaterials and Printing Technologies · Nanofabrication and Lithography Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (78)

Show source-provided references
1. Additive manufacturing: scientific and technological challenges, market uptake and opportunities10.1016/j.mattod.2017.07.001 ↗
2. Monolithic, 3D-printed microfluidic platform for recapitulation of dynamic tumor microenvironments10.1109/JMEMS.2018.2869327 ↗
3. Multivascular networks and functional intravascular topologies within biocompatible hydrogels10.1126/science.aav9750 ↗
4. 3D-printed microelectronics for integrated circuitry and passive wireless sensors
5. Ultracompact 3D microfluidics for time-resolved structural biology10.1038/s41467-020-14434-6 ↗
6. Spatially and optically tailored 3D printing for highly miniaturized and integrated microfluidics10.1038/s41467-021-25788-w ↗
7. High-speed 3D printing of millimeter-size customized aspheric imaging lenses with sub 7 nm surface roughness
8. “3D-printed eagle eye: Compound microlens system for foveated imaging | Science Advances.” 〈https://advances-sciencemag-org.stanford.idm.oclc.org/content/3/2/e1602655〉 (Accessed 26 March 2021).
9. All-printed flexible and stretchable electronics10.1002/adma.201604965 ↗
10. Continuous liquid interface production of 3D objects10.1126/science.aaa2397 ↗
11. Layerless fabrication with continuous liquid interface production10.1073/pnas.1605271113 ↗
12. “On-line force monitoring of platform ascending rapid prototyping system - ScienceDirect.” 〈https://www-sciencedirect-com.stanford.idm.oclc.org/science/article/pii/S0924013604008155〉 (Accessed 06 October 2021).
13. A fast mask projection stereolithography process for fabricating digital models in minutes10.1115/1.4007465 ↗
14. Separation force analysis and prediction based on cohesive element model for constrained-surface Stereolithography processes10.1016/j.cad.2015.05.002 ↗
15. Scalable, process-oriented beam lattices: Generation, characterization, and compensation for open cellular structures
16. Method for attaining dimensionally accurate conditions for high-resolution three-dimensional printing ceramic composite structures using MicroCLIP process10.1115/1.4044128 ↗
17. Air-diffusion-channel constrained surface based stereolithography for three-dimensional printing of objects with wide solid cross sections10.1115/1.4039440 ↗
18. Continuous fast 3D printing of SiOC ceramic components
19. Ti3C2Tx MXene as a novel functional photo blocker for stereolithographic 3D printing of multifunctional gels via Continuous Liquid Interface Production10.1016/j.compositesb.2021.109261 ↗
20. Enhanced continuous liquid interface production with track-etched membrane10.1108/RPJ-12-2017-0251 ↗
21. “3D Printer Models,” Carbon. 〈https://www.carbon3d.com/products/〉 (Accessed 07 October 2021).
22. L.M. Robeson, E.T. Samulski, A. ERMOSHKIN, J.M. Desimone, Continuous three dimensional fabrication from immiscible liquids, WO2015164234A1, Oct. 29, 2015 (Accessed 22 November 2021a). [Online]. 〈https://patents.google.com/patent/WO2015164234A1/en〉.
23. L.M. Robeson, E.T. Samulski, A. Ermoshkin, J.M. DeSimone, “Continuous three dimensional fabrication from immiscible liquids,” US10259171B2, Apr. 16, 2019 Accessed: Nov. 22, 2021b. [Online]. 〈https://patents.google.com/patent/US10259171B2/nl〉.
24. Rapid, large-volume, thermally controlled 3D printing using a mobile liquid interface10.1126/science.aax1562 ↗
25. M.P. de Beer, H.L. van der Laan, M.A. Cole, R.J. Whelan, M.A. Burns, T.F. Scott, “Rapid, continuous additive manufacturing by volumetric polymerization inhibition patterning,” Science Advances, vol. 5, no. 1, p. eaau8723, doi: 10.1126/sciadv.aau8723.10.1126/sciadv.aau8723 ↗
26. Scalable submicrometer additive manufacturing10.1126/science.aax8760 ↗
27. Finer features for functional microdevices10.1038/35089130 ↗
28. “Wide range of applications in research, prototyping and production processes.” 〈https://www.nanoscribe.com/en/applications〉 (accessed Oct. 27, 2021).
29. Rapid assembly of small materials building blocks (voxels) into large functional 3D metamaterials
30. Improved spatial resolution and surface roughness in photopolymerization-based laser nanowriting10.1063/1.1864249 ↗
31. Biomimetic 4D printing10.1038/nmat4544 ↗
32. Voxelated soft matter via multimaterial multinozzle 3D printing10.1038/s41586-019-1736-8 ↗
33. Fully packaged carbon nanotube supercapacitors by direct ink writing on flexible substrates10.1021/acsami.7b06804 ↗
34. Direct ink writing of 3D functional materials10.1002/adfm.200600434 ↗
35. Projection micro-stereolithography using digital micromirror dynamic mask10.1016/j.sna.2004.12.011 ↗
36. Design and optimization of a light-emitting diode projection micro-stereolithography three-dimensional manufacturing system10.1063/1.4769050 ↗
37. The leader in micro-precision 3D printers,” BMF Boston Micro Fabrication. 〈https://bmf3d.com/〉 (Accessed 27 October 2021).
38. Ultralight, ultrastiff mechanical metamaterials10.1126/science.1252291 ↗
39. Multiscale metallic metamaterials10.1038/nmat4694 ↗
40. Custom 3D printer and resin for 18 μm × 20 μm microfluidic flow channels10.1039/C7LC00644F ↗
41. Multimaterial 4D printing with tailorable shape memory polymers10.1038/srep31110 ↗
42. “Stratasys: 3D Printing & Additive Manufacturing,” Stratasys. 〈https://www.stratasys.com〉 (Accessed 27 October 2021).
43. Method for attaining dimensionally accurate conditions for high-resolution three-dimensional printing ceramic composite structures using MicroCLIP process
44. 3D-printing strong high-resolution antioxidant bioresorbable vascular stents10.1002/admt.201600138 ↗
45. Fabrication speed optimization for high-resolution 3D-printing of bioresorbable vascular scaffolds10.1016/j.procir.2017.04.038 ↗
46. A review of 3D printing technologies for soft polymer materials10.1002/adfm.202000187 ↗
47. “Fundamental Principles of Optical Lithography: The Science of Microfabrication | Wiley,” Wiley.com. 〈https://www.wiley.com/en-us/Fundamental+Principles+of+Optical+Lithography%3A+The+Science+of+Microfabrication-p-9780470018934〉 (Accessed 06 October 2021).
48. High-resolution stereolithography using a static liquid constrained interface10.1038/s43246-021-00145-y ↗
49. Teflon® AF: a family of amorphous fluoropolymers with extraordinary properties
50. Teflon AF materials10.1007/128_2011_249 ↗
51. Voxel based method for predictive modelling of solidification and stress in digital light processing based additive manufacture10.1039/D0SM01968B ↗
52. Multiphysical modeling and optimal control of material properties for photopolymerization processes
53. Real-time feedback controlled conversion in vat photopolymerization of ceramics: a proof of principle
54. A compact LED-based projection microstereolithography for producing 3D microstructures10.1038/s41598-019-56044-3 ↗
55. Predicting the separation time of semi-passive mechanism in DLP machine by CBR method10.18178/joace.7.1.56-60 ↗
56. Spring assisting mechanism for enhancing the separation performance of digital light process 3D printers10.1109/ACCESS.2019.2920004 ↗
57. Study of separation force in constrained surface projection stereolithography10.1108/RPJ-12-2015-0188 ↗
58. Synthesis of micropillar arrays via photopolymerization: an in situ study of light-induced formation, growth kinetics, and the influence of oxygen inhibition10.1021/acs.macromol.7b01274 ↗
59. Modeling and correcting cure-through in continuous stereolithographic 3D printing10.1002/admt.201900700 ↗
60. A comparison of the outputs of 3D scanners10.1016/j.proeng.2014.03.004 ↗
61. Statistical analysis of dimensional accuracy in additive manufacturing considering STL model properties10.1007/s00170-018-2117-4 ↗
62. Accuracy in dental surgical guide fabrication using different 3-D printing techniques
63. Geometrical metrology for metal additive manufacturing10.1016/j.cirp.2019.05.004 ↗
64. Automated metrology and geometric analysis of additively manufactured lattice structures
65. Geometrical product specification and verification in additive manufacturing10.1016/j.cirp.2017.04.043 ↗
66. Transdermal vaccination via 3D-printed microneedles induces potent humoral and cellular immunity10.1073/pnas.2102595118 ↗
67. Mechanisms of sampling interstitial fluid from skin using a microneedle patch10.1073/pnas.1716772115 ↗
68. Sampling interstitial fluid from human skin using a microneedle patch10.1126/scitranslmed.aaw0285 ↗
69. Minimally invasive extraction of dermal interstitial fluid for glucose monitoring using microneedles10.1089/dia.2005.7.131 ↗
70. Targeted, needle-free vaccinations in skin using multilayered, densely-packed dissolving microprojection arrays10.1002/smll.201000326 ↗
71. Single-step fabrication of computationally designed microneedles by continuous liquid interface production10.1371/journal.pone.0162518 ↗
72. Optical lace for synthetic afferent neural networks10.1126/scirobotics.aaw6304 ↗
73. Recent advances in microneedle composites for biomedical applications: advanced drug delivery technologies10.1016/j.msec.2019.05.002 ↗
74. J.A. Jackson et al., “Field responsive mechanical metamaterials,” Science Advances, vol. 4, no. 12, p. eaau6419, doi: 10.1126/sciadv.aau6419.10.1126/sciadv.aau6419 ↗
75. Highly compressible 3D periodic graphene aerogel microlattices10.1038/ncomms7962 ↗
76. 3D printing customized optical lens in minutes10.1002/adom.201901646 ↗
77. High-resolution projection microstereolithography for patterning of neovasculature10.1002/adhm.201500721 ↗
78. Smooth surface fabrication based on controlled meniscus and cure depth in microstereolithography10.1115/1.4030661 ↗