Mechanical properties of additive manufactured nickel alloy 625
Source abstract
Abstract
Abstract The mechanical, metallurgical and corrosion properties of Alloy 625 produced using the laser powder bed fusion (L-PBF) manufacturing process were investigated and compared with typical performance of the alloy produced using conventional forging processes. Test specimens were produced near net shape along with several demonstration pieces that were produced to examine the geometric complexity that could be achieved with the process. The additively manufactured specimens exhibited strength, fracture toughness and impact toughness that was equal to or better than properties typically achieved for wrought product. There was no evidence of stress corrosion cracking susceptibility in 3.5% NaCl solution at stress intensities up to 70 ksi-in1/2 after 700 h exposure. The microstructure was equiaxed in the plane of the powder bed build platform (X–Y) and exhibited a columnar shape in the Z direction although there was not any significant evidence of anisotropy in the mechanical properties.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Standard Specification for Additive Manufacturing nickel Alloy (UNS N06625) with Powder Bed Fusion, Standard F3056 ASTM International, West Conshohocken, PA, 2015.
2. Heat Treatment, Wrought Nickel Alloy and Cobalt Alloy Parts, AMS 2774, SAE International, Warrendale, PA.
3. ISO/ASTM52921-13: Standard Terminology for Additive Manufacturing-Coordinate Systems and Test Methodologies, ISO/ASTM 52921, ASTM International, West Conshohocken, PA, 2015.
4. Investigations on the microstructure and crack formation of IN738LC samples processed by selective laser melting using Gaussian and doughnut profiles10.1016/j.matdes.2015.10.027 ↗
5. The influence of the laser scan strategy on grain structure and cracking behaviour in SLM powder-bed fabricated nickel superalloy10.1016/j.jallcom.2014.06.172 ↗
6. Highly anisotropic steel processed by selective laser melting10.1007/s11663-013-9875-z ↗
7. Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625) Plate, Sheet, and Strip, Standard B443, ASTM International, West Conshohocken, PA.
8. Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625) Pipe and Tube, Standard B444, ASTM International, West Conshohocken, PA.
9. Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625)and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219) Rod and Bar, Standard B446, ASTM International, West Conshohocken, PA.
10. Nickel Alloy, Corrosion and Heat Resistant, Bars, Forgings, Extrusions, and Rings, 62Ni −21.5 Cr −9.0Mo −3.65 (Cb + Ta), Annealed, AMS 5666, SAE International, Warrendale, PA.
11. Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion, Standard F3056, ASTM International, West Conshohocken, PA.
12. Incodalloy Materials Chart, Document I3D8.1r2, Incodema3D, Ithaca, NY.
13. Data sheet EOS NickelAlloy IN625 TMS, Weil/10.2011.
14. Data Sheet, LENS Superalloys, Optomec, Inc., Albuquerque, NM, January 2015.
15. Metal 3d Printing Materials, http://www.optomec.com/3d-printed-metals/lens-materials/, Optomec Additive Manufacturing, 8/6/2015.
16. Volume 1: Development and Measurement Analysis of Design Data for Laser Powder Bed Fusion Additive Manufacturing of Nickel Alloy 625 − Final Technical Report, Cooperative Agreement No. 70NANB12H264 delivered to NIST, Project No. 53776GTH, EWI, August 28, 2014.
17. Using innovative technologies for manufacturing rocket engine hardware
18. Mechanical properties of samples fabricated by selective laser melting
19. Comparison of microstructures and properties for a Ni-Base superalloy (Alloy 625) fabricated by electron and laser beam melting
20. Microstructural architecture, microstructures, and mechanical properties for a nickel-base superalloy fabricated by electron beam melting10.1007/s11661-011-0748-2 ↗
21. L. Xue, et al. Investigation of laser consolidation for manufacturing functional net-shape components for potential rocket engine applications ICALEO, 2007, Paper 402 p. 161–169, 2007.10.2351/1.5061067 ↗
22. M. Rombouts, et al. Material study of laser cladded Inconel 625. Innovative Developments in Virtual and Physical Prototyping, eds. Bartolo et al., p. 333–337, 2011.10.1201/b11341-53 ↗
23. Laser metal deposition of Inconel 625: microstructure and mechanical properties10.2351/1.4757717 ↗
24. Rapid manufacturing and remanufacturing of DoD components using direct metal deposition
25. Laser aided direct metal deposition of Inconel 625 superalloy: microstructural evolution and thermal stability10.1016/j.msea.2009.01.009 ↗
26. Evaluation of fracture toughness and impact toughness of laser rapid manufactured inconel-625 structures and their co-relation10.1016/j.matdes.2014.03.013 ↗
27. ASTM E 1820-13 Standard Test Method for Measurement of Fracture Toughness, ASTM Annual Book of Standards, Vol. 03.01 ASTM International, West Conshohocken, PA, 2013.
28. ASTM E 1823–12 Standard Terminology Relating to Fatigue and Fracture Testing, ASTM Annual Book of Standards, Vol. 03.01 ASTM International, West Conshohocken, PA, 2012.
29. Fatigue and fracture toughness characteristics of laser rapid manufactured inconel 625 structures10.1016/j.msea.2010.08.034 ↗