Hydrogen embrittlement of steels: Mechanical properties in gaseous hydrogen
Source abstract
Abstract
As the exigency for decarbonizing sectors such as utilities, heavy-duty transportation, and manufacturing has risen, interest in hydrogen technologies has intensified accordingly. Among the safety issues being addressed for hydrogen technologies is the potential for hydrogen embrittlement of steels, which are commonly specified for pressure boundaries in containment components. From an engineering perspective, hydrogen embrittlement of steels can be managed through conventional design and fitness-for-service (FFS) practices provided the mechanical property inputs are measured appropriately, i.e., testing of steels is performed in the hydrogen environment. Given the increasing need for managing hydrogen embrittlement to safely operate high-pressure containment components, the purpose of this review is to comprehensively survey and critically assess the literature on the following mechanical properties of steels in gaseous hydrogen that serve as inputs to design and FFS analyses: threshold stress-intensity factor or threshold J-integral for subcritical, time-dependent cracking, fatigue crack growth rate, and total fatigue life. The review focuses on such mechanical properties in gaseous hydrogen for carbon-manganese (C-Mn) steels, low-alloy steels, austenitic stainless steels, duplex stainless steels, as well as the ferritic and martensitic stainless steels, since these are most pertinent to containment components in hydrogen technology. Three high-level conclusions from the review are the following: 1) mechanical property data for C-Mn and low-alloy steels in hydrogen gas are sufficiently mature so that conservative limits can be specified for design and FFS analyses, 2) mechanical property data for austenitic stainless steels must be supplemented with additional measurements, particularly from specimens tested in high-pressure hydrogen gas, before conservative limits can be defined for design and FFS analyses, and 3) mechanical property data for ferritic, martensitic, and duplex stainless steels in hydrogen gas are so scarce that design and FFS analyses covering wide ranges of steel grades and component service conditions are currently not feasible.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Material Properties and Failure Mechanisms · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical Engineering and Materials Science, University of Pittsburgh, Pittsburgh, PA, USA
Somerday Consulting LLC, Wayne, PA, USA
Funding
National Science Foundation
References (100+)
Show source-provided references
1. DOE hydrogen program annual merit review and peer evaluation www.hydrogen.energy.gove/library/annual-review.
2. National Research Council. The Hydrogen Economy: Opportunities, Costs, Barriers, and R&D Needs. Washington, DC: National Academies Press, 2004.
3. 10.1038/s41578-021-00376-y10.1038/s41578-021-00376-y ↗
4. 10.2172/189335510.2172/1893355 ↗
5. 10.1016/j.ijhydene.2022.08.04110.1016/j.ijhydene.2022.08.041 ↗
6. 10.1093/ce/zkad02110.1093/ce/zkad021 ↗
7. Gangloff RP. H-enhanced deformation and fracture in the crack tip process zone. In: Somerday BP, Sofronis P (eds) Material performance in hydrogen environments: proceedings of the 2016 international hydrogen conference. New York, NY: ASME Press, 2016, pp.1–35.
8. Nelson HG. Hydrogen embrittlement. In: Briant CL, Banerji SK (eds) Treatise on materials science and technology. 25. New York: Academic Press, Inc, 1983, pp.275–359.
9. 10.1520/STP18827S10.1520/STP18827S ↗
10. 10.1016/B0-08-043749-4/06134-610.1016/B0-08-043749-4/06134-6 ↗
11. 10.1016/j.jngse.2022.10454710.1016/j.jngse.2022.104547 ↗
12. 10.1007/s11665-021-06045-z10.1007/s11665-021-06045-z ↗
13. 10.1146/annurev.ms.08.080178.00155110.1146/annurev.ms.08.080178.001551 ↗
14. 10.1007/BF0265470010.1007/BF02654700 ↗
15. Moody NR, Robinson SL, Garrison WMJr. Hydrogen effects on the properties and fracture modes of iron-based alloys. Res Mech 1990; 30: 143.
16. 10.1016/S0013-7944(00)00124-710.1016/S0013-7944(00)00124-7 ↗
17. 10.1115/1.314143510.1115/1.3141435 ↗
18. 10.6028/jres.115.03010.6028/jres.115.030 ↗
19. 10.1007/978-981-10-0161-110.1007/978-981-10-0161-1 ↗
20. 10.1007/s10853-017-1978-510.1007/s10853-017-1978-5 ↗
21. 10.1063/5.001285110.1063/5.0012851 ↗
22. 10.1016/B978-0-12-819726-4.00086-710.1016/B978-0-12-819726-4.00086-7 ↗
23. 10.1016/j.engfailanal.2021.10598510.1016/j.engfailanal.2021.105985 ↗
24. 10.1515/corrrev-2022-005210.1515/corrrev-2022-0052 ↗
25. Matsunaga H, Yamabe J, Takakuwa O, et al. Hydrogen Gas Embrittlement: Mechanisms, Mechanics, and Design. Amsterdam, Netherlands: Elsevier, 2024.
26. Gangloff RP, Somerday BP (eds) Gaseous Hydrogen Embrittlement of Materials in Energy Technologies, Vols. 1–2. Cambridge, UK: Woodhead Publishing Ltd., 2012.
27. Oriani RA, Hirth JP, Smialowski M (eds) Hydrogen Degradation of Ferrous Alloys. Park Ridge, NJ: Noyes Publications, 1985.
28. 10.1115/1.289191010.1115/1.2891910 ↗
29. Gangloff RP. Science-based prognosis to manage structural alloy performance in hydrogen. In: Somerday BP, Sofronis P, Jones RH (eds) Effects of hydrogen on materials. Materials Park, OH: ASM International, 2009, pp.1–21.
30. 10.1016/B978-008044635-6.50015-710.1016/B978-008044635-6.50015-7 ↗
31. 10.1533/9780857093899.2.19510.1533/9780857093899.2.195 ↗
32. STP/PT-003: Hydrogen Standardization Interim Report for Tanks, Piping, and Pipelines. New York, NY: American Society of Mechanical Engineers, 2005.
33. 10.1533/9780857095374.1.8910.1533/9780857095374.1.89 ↗
34. Walter RJ, Chandler WT. D8-14.2: Effect of high pressure hydrogen on metals. In Materials engineering exposition and congress. Metals Park, OH: American Society of Metals, 1968, pp.1–22.
35. Lee JA. NASA/TM-2016-218602: Hydrogen Embrittlement. Huntsville, AL: Marshall Space Flight Center, 2016.
36. Sandia National Laboratories. Technical reference for hydrogen compatibility of materials https://www.sandia.gov/matlstechref.
37. 10.1115/IMECE2006-1521410.1115/IMECE2006-15214 ↗
38. 10.1115/PVP2007-2682010.1115/PVP2007-26820 ↗
39. 10.1007/BF0281924310.1007/BF02819243 ↗
40. Nelson HG, Williams DP. Quantitative observations of hydrogen-induced, slow crack growth in a low alloy steel. In: Staehle RW, Hochmann J, McCright RD, Slater JE (eds) Stress corrosion cracking and hydrogen embrittlement of iron base alloys. Houston, TX: NACE, 1977, pp.390–404.
41. 10.1007/BF0283398810.1007/BF02833988 ↗
42. 10.1007/BF0264429210.1007/BF02644292 ↗
43. 10.1007/BF0264700310.1007/BF02647003 ↗
44. 10.1002/srin.19900037110.1002/srin.199000371 ↗
45. 10.1007/BF0264244910.1007/BF02642449 ↗
46. 10.1007/BF0265991910.1007/BF02659919 ↗
47. 10.1007/BF0264233910.1007/BF02642339 ↗
48. 10.5006/0010-9312-31.11.40410.5006/0010-9312-31.11.404 ↗
49. Robinson SL, Stoltz RE. Toughness losses and fracture behavior of low strength carbon-manganese steels in hydrogen. In: Bernstein IM, Thompson AW (eds) Hydrogen effects in metals. Warrendale, PA: The Metallurgical Society of AIME, 1981, pp.987–995.
50. 10.1520/STP45297S10.1520/STP45297S ↗
51. 10.1007/s11661-012-1400-510.1007/s11661-012-1400-5 ↗
52. 10.1016/j.tafmec.2020.10284610.1016/j.tafmec.2020.102846 ↗
53. 10.1115/PVP2015-4532810.1115/PVP2015-45328 ↗
54. 10.1115/PVP2014-2881510.1115/PVP2014-28815 ↗
55. 10.1115/PVP2023-10647710.1115/PVP2023-106477 ↗
56. Wada Y, Ishigaki R, Tanaka Y, et al. Evaluation of metal materials for hydrogen fuel stations. In International conference on hydrogen safety. Pisa, Italy: HySafe, 2005, p.220113.
57. 10.1115/PVP2007-2653310.1115/PVP2007-26533 ↗
58. 10.1115/1.403008610.1115/1.4030086 ↗
59. 10.1016/j.ijhydene.2016.05.12410.1016/j.ijhydene.2016.05.124 ↗
60. 10.1115/PVP2023-10641710.1115/PVP2023-106417 ↗
61. San Marchi C, Bortot P, Felbaum J, et al. Fatigue and fracture of high-hardenability steels for thick-walled hydrogen pressure vessels. In: 7th International conference on hydrogen safety (ICHS 2017). Hamburg, Germany: HySafe, 2017, pp.227.
62. 10.1115/PVP2015-4533710.1115/PVP2015-45337 ↗
63. Zawierucha R, Xu K. Hydrogen pipeline steels. In: Materials science & technology, vol. 3. Pittsburgh, PA: TMS, 2005, pp.79–90.
64. 10.1115/PVP2010-2582510.1115/PVP2010-25825 ↗
65. 10.1115/PVP2011-5768410.1115/PVP2011-57684 ↗
66. 10.1016/j.ijhydene.2012.05.14310.1016/j.ijhydene.2012.05.143 ↗
67. 10.1115/PVP2018-8465810.1115/PVP2018-84658 ↗
68. 10.1115/IPC2012-9031310.1115/IPC2012-90313 ↗
69. 10.1016/j.ijfatigue.2018.10.02110.1016/j.ijfatigue.2018.10.021 ↗
70. 10.1016/j.ijhydene.2019.11.01310.1016/j.ijhydene.2019.11.013 ↗
71. 10.1115/PVP2021-6194510.1115/PVP2021-61945 ↗
72. 10.1016/j.matlet.2021.12992410.1016/j.matlet.2021.129924 ↗
73. Ronevich JA, San Marchi C. Materials compatibility concerns for hydrogen blended into natural gas. In: Proceedings of ASME 2021 pressure vessels and piping conference: vol. 4. New York, NY: American Society of Mechanical Engineers, 2021, pp.PVP2021–62045.
74. 10.1016/j.ijhydene.2020.11.23910.1016/j.ijhydene.2020.11.239 ↗
75. 10.17736/ijope.2022.jc87810.17736/ijope.2022.jc878 ↗
76. 10.1016/j.jngse.2022.10452910.1016/j.jngse.2022.104529 ↗
77. San Marchi C, Ronevich JA. Fatigue and fracture of pipeline steels in high-pressure hydrogen gas. In: Proceedings of ASME 2022 pressure vessels and piping conference: vol. 4B. New York, NY: American Society of Mechanical Engineers, 2022, pp.PVP2022–84757.
78. 10.1115/PVP2023-10562210.1115/PVP2023-105622 ↗
79. 10.1115/PVP2023-10572510.1115/PVP2023-105725 ↗
80. 10.1115/PVP2023-10597210.1115/PVP2023-105972 ↗
81. 10.1007/s11661-021-06491-310.1007/s11661-021-06491-3 ↗
82. 10.1115/PVP2024-12255710.1115/PVP2024-122557 ↗
83. 10.1115/PVP2024-12347710.1115/PVP2024-123477 ↗
84. 10.1115/PVP2024-12254510.1115/PVP2024-122545 ↗
85. 10.1115/PVP2024-12338310.1115/PVP2024-123383 ↗
86. Ronevich JA, Kagay B, San Marchi C, et al. Investigating the role of ferritic steel microstructure and strength in fracture resistance in high-pressure hydrogen gas. In: Proceedings of ASME 2022 pressure vessels and piping conference: vol. 4B. New York, NY: American Society of Mechanical Engineers, 2022, pp.PVP2022–83915.
87. 10.1111/ffe.1299410.1111/ffe.12994 ↗
88. 10.1115/PVP2018-8416310.1115/PVP2018-84163 ↗
89. Nelson HG. On the mechanism of hydrogen-enhanced crack growth in ferritic steels. In: Proceedings of the Second International Conference on Mechanical Behavior of Materials. Metals Park, OH: ASM, 1976, pp.690–694.
90. Walter RJ, Chandler WT. Cyclic-load crack growth in ASME SA-105 grade II steel in high-pressure hydrogen at ambient temperature. In: Thompson AW, Bernstein IM (eds) Effect of hydrogen on behavior of materials. Warrendale, PA: The Metallurgical Society of AIME, 1976, pp.273–286.
91. Wachob HF, Nelson HG. Influence of microstructure on the fatigue crack growth of A516 in hydrogen. In: Bernstein IM, Thompson AW (eds) Hydrogen effects in metals. Warrendale, PA: Metallurgical Society of AIME, 1981, pp.703–711.
92. Stewart AT. The effect of hydrogen on fatigue crack propagation in steels. In: Swann PR, Ford FP, Westwood ARC (eds) Mechanisms of environment sensitive cracking of materials. London: The Metals Society, 1977, pp.400–411.
93. 10.1115/1.344367810.1115/1.3443678 ↗
94. Yoshioka S, Kumasawa M, Demizu M, et al. Fatigue crack growth behavior in hydrogen gas environment. In: Ritchie RO, Starke EAJr (eds) Third International Conference on Fatigue and Fatigue Thresholds, Fatigue ‘87, Vol. 2. West Midlands, UK: Engineering Materials Advisory Services, 1987, pp.697–706.
95. Fukuyama S, Yokogawa K. Prevention of hydrogen environmental assisted crack growth of 2.25Cr-1Mo steel by gaseous inhibitors. In: Pressure vessel technology, vol. 2. Essen, Germany: Verband der Technischen Uberwachungs-Vereine, 1992, pp.914–923.
96. 10.1179/msc.1982.16.11.52910.1179/msc.1982.16.11.529 ↗
97. 10.1115/PVP2011-5770110.1115/PVP2011-57701 ↗
98. Moro I, Briottet L, Lemoine P, et al. Fatigue crack growth of a C-Mn steel and associated weld under hydrogen pressure. In: Somerday BP, Sofronis P (eds) Proceedings of the 2012 international hydrogen conference: hydrogen-materials interactions. New York: ASME Press, 2014, pp.309–317.
99. 10.1115/PVP2013-9721710.1115/PVP2013-97217 ↗
100. 10.1016/j.corsci.2013.10.01410.1016/j.corsci.2013.10.014 ↗