journal article·2024-07Open access

Graph-based spot melting sequence for electron beam powder bed fusion

Tobias Kupfer, Christoph Breuning, Matthias Markl

Abstract

Powder bed fusion processes are nowadays able to manufacture parts with a high geometric complexity. However, it is still challenging to realize these complex geometries defect-free as well as with homogeneous properties using classic line-based melting strategies. Electron beam powder bed fusion offers the promising opportunity to achieve this goal by spot melting, i.e., jumping from melt spot to melt spot with a very high velocity. The fundamental idea is, that homogeneous properties result, if all melt spots are independent from each other regarding their thermal history. The corresponding sequence of melt spots controls the temperature field and thus the microstructure leading to the mechanical properties. The main challenge is to develop a spot melting sequence resulting in independent spots while ensuring other process restrictions, like machine dependent jump lengths. In this contribution, a new heuristic algorithm to generate a spot melting sequence is developed. It bases on the subdivision of complex geometries into consecutively melted groups. The groups are transformed into graphs, connecting the spots inside the groups with all possible jumps meeting certain machine restrictions. A heuristic algorithm to identify Hamiltonian cycles is adapted to determine the final spot melting sequence. We demonstrate the applicability of the heuristic algorithm on complex geometries by one layer of a fuel nozzle combined with temperature simulations.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Additive manufacturing of metallic components by selective electron beam melting — a review10.1080/09506608.2016.1176289 ↗
2. Metal fabrication by additive manufacturing using laser and electron beam melting technologies10.1016/S1005-0302(12)60016-4 ↗
3. Additive manufacturing of titanium alloys by electron beam melting: A review10.1002/adem.201700842 ↗
4. A multivariate meltpool stability criterion for fabrication of complex geometries in electron beam powder bed fusion
5. Numerical simulation of multi-component evaporation during selective electron beam melting of TiAl10.1016/j.jmatprotec.2017.04.016 ↗
6. Impact of the power-dependent beam diameter during electron beam additive manufacturing: A case study with γ-TiAl10.3390/app122111300 ↗
7. Influence of electron beam powder bed fusion process parameters at constant volumetric energy density on surface topography and microstructural homogeneity of a titanium aluminide alloy10.1002/adem.202201871 ↗
8. Scanning method of filling lines in electron beam selective melting10.1243/09544054JEM913 ↗
9. Tailored grain morphology via a unique melting strategy in electron beam-powder bed fusion10.1016/j.msea.2021.141820 ↗
10. Site specific control of crystallographic grain orientation through electron beam additive manufacturing10.1179/1743284714Y.0000000734 ↗
11. Strategy for texture management in metals additive manufacturing10.1007/s11837-017-2264-3 ↗
12. Influence of scan strategy on porosity and microstructure of ti-6al-4v fabricated by electron beam powder bed fusion
13. Microstructural and micromechanical characterization of IN718 theta shaped specimens built with electron beam melting10.1016/j.actamat.2016.02.005 ↗
14. Localized melt-scan strategy for site specific control of grain size and primary dendrite arm spacing in electron beam additive manufacturing10.1016/j.actamat.2017.08.038 ↗
15. Influence of geometry on columnar to equiaxed transition during electron beam powder bed fusion of IN718
16. Microstructure tailoring in electron beam powder bed fusion additive manufacturing and its potential consequences
17. Electron beam powder bed fusion for direct microstructure design – in-depth analysis of prospects and limitations of the multi spot scanning strategy10.1016/j.jmapro.2023.10.070 ↗
18. Pathways to exploit the multi-spot scanning strategy in electron beam additive manufacturing for control of microstructure and defect density10.1016/j.jmrt.2024.06.043 ↗
19. Comparative insights into microstructure and magnetism of Ni-mn-sn Heusler alloys manufactured by electron beam and laser beam powder bed fusion
20. Microstructure-property gradients in Ni-based superalloy (inconel 738) additively manufactured via electron beam powder bed fusion
21. Correlations of cracking with scan strategy and build geometry in electron beam powder bed additive manufacturing
22. Geometry-independent microstructure optimization for electron beam powder bed fusion additive manufacturing
23. A stochastic scan strategy for grain structure control in complex geometries using electron beam powder bed fusion
24. An algorithm for physics informed scan path optimization in additive manufacturing10.1016/j.commatsci.2022.111566 ↗
25. Hybridham: A novel hybrid heuristic for finding Hamiltonian cycle10.1155/2018/9328103 ↗
26. Hamiltonian circuits in random graphs10.1016/0012-365X(76)90068-6 ↗
27. In-situ quality assurance for electron-based additive manufacturing by electron optical observation10.1007/s40964-022-00382-8 ↗
28. Utility of superposition-based finite element approach for part-scale thermal simulation in additive manufacturing
29. A return time compensation scheme for complex geometries in electron beam powder bed fusion
30. Texture evolution as a function of scan strategy and build height in electron beam melted Ti-6Al-4V
31. The effect of beam scan strategies on microstructural variations in Ti-6Al-4V fabricated by electron beam powder bed fusion10.1016/j.matdes.2020.109165 ↗
32. Effect of scanning strategy on variant selection in additively manufactured Ti-6Al-4V
33. Effects of processing parameters on surface roughness of additive manufactured Ti-6Al-4V via electron beam melting10.3390/ma10101121 ↗
34. High-throughput numerical investigation of process parameter-melt pool relationships in electron beam powder bed fusion10.3390/modelling4030019 ↗