journal article·2021-10-03

Cryomilling as environmentally friendly synthesis route to prepare nanomaterials

Nirmal Kumar Katiyar, Krishanu Biswas, C. S. Tiwary

International Materials Reviews· Volume 66· Issue 7
Publisher page

Abstract

The milling of materials at cryogenic temperature has gained importance both in academic as well as the industrial community in the last two decades, primarily because of distinct advantages of this technique as compared to milling at room temperature; environmental friendly nature, cost-effectiveness, rapid grain refinement, less contamination, and large scale production capability of various nanomaterials. Scientifically, milling at cryo-temperature exhibits several distinct material related phenomena; suppression of recovery and recrystallisation, predominant fracture over cold welding, significantly low oxidation, and contamination, leading to rapid grain refinement. Cryomilling has extensively been used to obtain finer scale powder of spices for the preservation of aroma, medicines for effective dissolution, or amorphisation. It has been considered an environmentally friendly process as it utilises benign liquid nitrogen or argon without discharging any toxic entity. The present review is intended to provide various scientific as well as technological aspects of cryomilling, environmental impact, and future direction.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: nanoparticles nucleation surface interactions · Energetic Materials and Combustion · Thermal and Kinetic Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Materials Science & Engineering, Indian Institute of Technology Kanpur, Kanpur, India

School of Engineering, London South Bank University, London, UK

Department of Materials & Metallurgical Engineering, Indian Institute of Technology Kharagpur, Kharagpur, India

Funding

Indian Space Research Organization · Ministry of Human Resource Development · Royal Society UK · Science and Engineering Research Board

References (100+)

Show source-provided references
1. 10.1002/978352763154410.1002/9783527631544 ↗
2. Mader K · 2006
3. 10.1007/978-94-015-8771-610.1007/978-94-015-8771-6 ↗
4. Abdalla AM · Renew Sust Energ Rev · 2018 · 82 · 35310.1016/j.rser.2017.09.046 ↗
5. 10.1002/adma.20140444610.1002/adma.201404446 ↗
6. Seil JT · Int J Nanomed · 2012 · 7 · 2767
7. Rao CNR · Dalton Trans · 2012 · 41 · 508910.1039/c2dt12266a ↗
8. 10.1016/j.pmatsci.2006.10.01610.1016/j.pmatsci.2006.10.016 ↗
9. 10.1063/1.492932510.1063/1.4929325 ↗
10. Kumar N · J Mater Res Technol · 2017 · 8 · 6310.1016/j.jmrt.2017.05.017 ↗
11. 10.1039/C6RA23120A10.1039/C6RA23120A ↗
12. 10.1007/s10853-018-2485-z10.1007/s10853-018-2485-z ↗
13. 10.1016/S0079-6425(99)00010-910.1016/S0079-6425(99)00010-9 ↗
14. 10.1016/S0032-5910(99)00155-210.1016/S0032-5910(99)00155-2 ↗
15. 10.1201/978020302064710.1201/9780203020647 ↗
16. Petkovic-Luton R, Vallone J, ExxonMobil Research and Engineering Co, 1986. Composite dispersion strengthened composite metal powders. U.S. Patent 4,619,699.
17. Hayes AE. Cryogenics: theory, processes and applications. UK: Nova Science Publishers Inc.; 2011. p. 1–171.
18. Dieter GE. · 1986
19. 10.1016/0965-9773(95)00027-510.1016/0965-9773(95)00027-5 ↗
20. 10.1016/S0925-8388(00)01303-710.1016/S0925-8388(00)01303-7 ↗
21. 10.1021/ja01167a07910.1021/ja01167a079 ↗
22. 10.1016/j.msea.2007.06.09910.1016/j.msea.2007.06.099 ↗
23. 10.1007/s11661-001-0185-810.1007/s11661-001-0185-8 ↗
24. 10.1007/s11661-003-0259-x10.1007/s11661-003-0259-x ↗
25. 10.1016/j.msea.2008.12.01710.1016/j.msea.2008.12.017 ↗
26. 10.1016/j.msea.2013.11.07510.1016/j.msea.2013.11.075 ↗
27. 10.1007/s11661-004-0368-110.1007/s11661-004-0368-1 ↗
28. 10.1016/j.msea.2010.11.07310.1016/j.msea.2010.11.073 ↗
29. 10.1016/j.msea.2003.10.23510.1016/j.msea.2003.10.235 ↗
30. 10.1016/j.msea.2012.07.05910.1016/j.msea.2012.07.059 ↗
31. 10.1021/acs.langmuir.8b0340110.1021/acs.langmuir.8b03401 ↗
32. 10.1016/j.scriptamat.2009.11.01110.1016/j.scriptamat.2009.11.011 ↗
33. 10.1016/j.memsci.2015.10.05510.1016/j.memsci.2015.10.055 ↗
34. 10.1021/ie901173h10.1021/ie901173h ↗
35. 10.1186/1556-276X-6-37310.1186/1556-276X-6-373 ↗
36. 10.1016/j.jcis.2011.11.05710.1016/j.jcis.2011.11.057 ↗
37. 10.1021/cm203853f10.1021/cm203853f ↗
38. 10.1039/C5CE01014D10.1039/C5CE01014D ↗
39. Hunter RJ · 1981
40. 10.1016/j.ijpharm.2015.07.00910.1016/j.ijpharm.2015.07.009 ↗
41. 10.1002/app.4302710.1002/app.43027 ↗
42. 10.3136/nskkk1962.25.46510.3136/nskkk1962.25.465 ↗
43. Travan A · 2007
44. 10.1016/j.compositesa.2018.01.00410.1016/j.compositesa.2018.01.004 ↗
45. 10.1039/C5NR07287E10.1039/C5NR07287E ↗
46. Mittal G · Polymers (Basel) · 2016 · 8 · 169(110.3390/polym8050169 ↗
47. 10.3109/03639045.2014.92002410.3109/03639045.2014.920024 ↗
48. 10.4028/www.scientific.net/MSF.815.61110.4028/www.scientific.net/MSF.815.611 ↗
49. 10.2174/1573413711309666011410.2174/15734137113096660114 ↗
50. Nigam P · Int J Dent Med Res · 2014 · 1 · 3
51. 10.1002/polb.2095510.1002/polb.20955 ↗
52. 10.1016/j.jallcom.2018.05.09810.1016/j.jallcom.2018.05.098 ↗
53. 10.1016/j.msea.2003.10.04710.1016/j.msea.2003.10.047 ↗
54. Smith AP. Solid state blending and compatibilization of polymers by cryogenic mechanical alloying [Ph D thesis]. North Carolina State University; 1999.10.1557/PROC-629-FF6.9 ↗
55. 10.1002/(SICI)1521-4095(199910)11:15<1277::AID-ADMA1277>3.0.CO;2-910.1002/(SICI)1521-4095(199910)11:15<1277::AID-ADMA1277>3.0.CO;2-9 ↗
56. 10.1007/s11666-014-0153-710.1007/s11666-014-0153-7 ↗
57. 10.1016/j.mattod.2017.01.01510.1016/j.mattod.2017.01.015 ↗
58. 10.1016/j.powtec.2016.03.00910.1016/j.powtec.2016.03.009 ↗
59. 10.4028/www.scientific.net/SSP.281.28510.4028/www.scientific.net/SSP.281.285 ↗
60. 10.2320/matertrans.46.10510.2320/matertrans.46.105 ↗
61. 10.1007/s11661-006-0191-y10.1007/s11661-006-0191-y ↗
62. 10.4028/www.scientific.net/KEM.512-515.12710.4028/www.scientific.net/KEM.512-515.127 ↗
63. 10.1016/j.scriptamat.2009.05.03310.1016/j.scriptamat.2009.05.033 ↗
64. 10.1007/s11661-010-0490-110.1007/s11661-010-0490-1 ↗
65. 10.1016/j.ceramint.2011.06.02910.1016/j.ceramint.2011.06.029 ↗
66. 10.1007/s11095-010-0269-510.1007/s11095-010-0269-5 ↗
67. 10.1248/cpb.60.32510.1248/cpb.60.325 ↗
68. 10.1016/j.ijpharm.2012.01.00710.1016/j.ijpharm.2012.01.007 ↗
69. 10.1002/jps.2397810.1002/jps.23978 ↗
70. 10.1007/s13197-018-3128-810.1007/s13197-018-3128-8 ↗
71. 10.1016/j.matlet.2015.03.14310.1016/j.matlet.2015.03.143 ↗
72. 10.1016/j.molliq.2015.03.02910.1016/j.molliq.2015.03.029 ↗
73. 10.1016/j.msec.2015.08.01810.1016/j.msec.2015.08.018 ↗
74. 10.1016/j.msec.2015.04.04810.1016/j.msec.2015.04.048 ↗
75. 10.1016/j.cis.2008.09.00210.1016/j.cis.2008.09.002 ↗
76. 10.1016/j.colsurfb.2012.01.02610.1016/j.colsurfb.2012.01.026 ↗
77. Wasserscheid P. · 2010 · 3
78. 10.1039/b615357g10.1039/b615357g ↗
79. 10.1016/j.pmatsci.2005.04.00410.1016/j.pmatsci.2005.04.004 ↗
80. 10.1557/S088376940005149610.1557/S0883769400051496 ↗
81. 10.1016/0965-9773(93)90016-510.1016/0965-9773(93)90016-5 ↗
82. 10.1016/0965-9773(95)00280-R10.1016/0965-9773(95)00280-R ↗
83. 10.3390/met801003110.3390/met8010031 ↗
84. 10.1111/jfpe.1282610.1111/jfpe.12826 ↗
85. http://www.unionprocess.com/laboratory-grinding-attritors.html http://www.unionprocess.com/laboratory-grinding-attritors.html.
86. http://www.retsch.com/products/milling/ball-mills/mixer-mill-cryomill.
87. https://www.spexsampleprep.com/freezermill-for-cryogenic-grinding, SPEX CentriPrep Freezer mill.
88. http://tauinstrument.com/cryo-ball-mill-pictures/.
89. http://www.fritsch-milling.com/products/milling/ball-mills/pulverisette-0/description/ http://www.fritsch-milling.com/products/milling/ball-mills/pulverisette-0/description/.
90. 10.1002/jps.2454110.1002/jps.24541 ↗
91. 10.1007/BF0264416110.1007/BF02644161 ↗
92. 10.1146/annurev.ms.13.080183.00143110.1146/annurev.ms.13.080183.001431 ↗
93. 10.1016/S0026-0657(10)80124-910.1016/S0026-0657(10)80124-9 ↗
94. 10.1016/j.ceramint.2016.11.02710.1016/j.ceramint.2016.11.027 ↗
95. 10.1179/imr.1998.43.3.10110.1179/imr.1998.43.3.101 ↗
96. 10.1016/0966-9795(96)00001-510.1016/0966-9795(96)00001-5 ↗
97. 10.1007/s10853-006-0312-410.1007/s10853-006-0312-4 ↗
98. 10.1007/BF0278240910.1007/BF02782409 ↗
99. 10.1007/s10853-006-0907-910.1007/s10853-006-0907-9 ↗
100. 10.1016/S1359-6454(03)00230-110.1016/S1359-6454(03)00230-1 ↗