Microstructural evolution and high temperature failure of ferritic to austenitic dissimilar welds
Source abstract
Abstract
Dissimilar metal welds between ferritic and austenitic alloys are used extensively in power plants. Premature failure of such welds can occur below the expected creep life of either base metal. This article reviews microstructural evolution in dissimilar welds and describes factors that contribute to premature failure. The microstructure in the as welded condition consists of a sharp chemical concentration gradient across the fusion line. Martensite forms within this gradient due to high hardenability and rapid cooling rates from welding. Upon aging, carbon diffuses down the chemical potential gradient from the ferritic steel toward the austenitic alloy. This can lead to formation of a soft carbon denuded zone in the ferritic steel, and nucleation and growth of carbides in the austenitic steel that produce high hardness. These differences in microstructure and hardness occur over distances of about 50–100 μm. Failure is attributed to the steep microstructural and mechanical property gradients, the large difference in coefficient of thermal expansion, formation of interfacial carbides that promote creep cavity formation, and preferential oxidation of the ferritic steel. Information is also provided on available creep rupture properties, remaining life estimation techniques, current best practices and research in progress.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (76)
Show source-provided references
1. Dooley R, Chang P: ‘The current status of boiler tube failures in fossil plants’, Proc. Int. Conf. on’ Boiler tube failures in fossil plants’, Nashville, TN, USA, November 1997, EPRI,2–10.
2. 10.1007/s11661-011-0627-x10.1007/s11661-011-0627-x ↗
3. Collins J, Tone V, Gibbs G: ‘Next generation nuclear power plant project technology development roadmaps: the technical path forward for 750–800°C reactor outlet temperature’, INL report no. EXT-09-16598, Idaho National Laboratory, Idaho Falls, ID, USA, 2009.
4. Kou S: ‘Welding metallurgy’; 2003, Hoboken, NJ, John Wiley and Sons Ltd.
5. 10.1007/s11661-001-0107-910.1007/s11661-001-0107-9 ↗
6. DuPont J · Weld. J. · 2007 · 86 · 54S
7. Banovic S · Weld. J. · 2001 · 80 · 62s
8. 10.1007/BF0291491310.1007/BF02914913 ↗
9. Gittos M · Weld. J. · 1992 · 71 · 461s
10. Omar A · Weld. J. · 1998 · 67 · 86s
11. Lundin CD · Weld. J. · 1982 · 61 · 58s
12. Campbell G, Elmer J, Gibbs W: ‘Evaluation of factors controlling high temperature service life of 2–1/4Cr–1 Mo Steel to austenitic stainless steel weldments’, In ‘Trends in welding research in the United States’, 443–470; 1981, Materials Park, OH, ASM.
13. 10.1179/stw.1999.4.1.2910.1179/stw.1999.4.1.29 ↗
14. 10.1023/A:100484660704610.1023/A:1004846607046 ↗
15. 10.1007/s11661-005-0241-x10.1007/s11661-005-0241-x ↗
16. Albert SK · Weld. J. · 1997 · 76 · 135s
17. Ryder R, Li C, Viswanathan R, Dimmer J: ‘Dissimilar metal weld failures in power plants – causes and remedies’, in ‘Trends in electric utility research’, 137–147; 1984, Chicagon, IL, Pergamon.
18. Christoffel R · Weld. J. · 1956 · 35 · 457s
19. 10.2355/isijinternational.37.113910.2355/isijinternational.37.1139 ↗
20. Race JM, Bhadeshia H: ‘Carbon migration across dissimilar steel welds’, in ‘International trends in welding science and technology’, 315–320; 1992, Materials Park, OH, ASM.
21. Kim B, An H, Song J: ‘Analysis of carbon migration with post-weld heat treatment in dissimilar metal weld’in ‘International trends in welding science and technology’, 307–314; 1992, Materials Park, OH, ASM.
22. 10.1023/A:101161623239610.1023/A:1011616232396 ↗
23. Eckel JF · Weld. J. · 1964 · 43 · 170s
24. 10.3184/096034010X1282064259072910.3184/096034010X12820642590729 ↗
25. Coleman K, Gandy D: ‘Alternative filler materials for DMWs involving P91 materials’, in ‘Advances in materials technology for fossil power plants’, 940–967; 2008, Materials Park, OH, ASM.10.31399/asm.cp.am-epri-2007p0940 ↗
26. Yasuda K: ‘Cracking of overlay weldment for pressure vessel’, Welding Research Committee of Japan Welding Society, 1982.
27. Li C, Viswanathan R, Ryder R: ‘Advances in life prediction methods’; 1983, New York, ASME.
28. David-Thomas R, Diletto R, DeLong J: Proc. Conf. on ‘Pressure vessels and piping’, Minneapolis, MI, USA, June 1994, ASME, Vol. 288, 201.
29. Nath B: ‘Creep behaviour of dissimilar metal welds on stress relieving’, Proc. 4th Int. Conf. on ‘Welding in nuclear engineering’, 52–56; 1982, Aachen, Deutschen Verband fur Schweibtechnik.
30. Nath B: ‘Creep rupture and creep crack growth behavior of transition joints’, Proc. Int. Conf. on ‘Welding technology for energy applications’, 597–621; 1982, Gatlinburg, TN, Oak Ridge National Laboratory.
31. 10.1016/S0921-5093(00)01374-510.1016/S0921-5093(00)01374-5 ↗
32. 10.1016/S0921-5093(00)01375-710.1016/S0921-5093(00)01375-7 ↗
33. 10.1115/1.326444310.1115/1.3264443 ↗
34. 10.1179/03071698280328585510.1179/030716982803285855 ↗
35. 10.1179/03071698480327467510.1179/030716984803274675 ↗
36. Viswanathan R: Proc. Conf. on ‘Boiler tube failures in fossil power plants’, Palo Alto, CA, USA, November 1987, EPRI, 15–23.
37. Wagner C · Z. Electrochem. · 1961 · 65 · 581
38. 10.1016/0022-3697(61)90054-310.1016/0022-3697(61)90054-3 ↗
39. Klueh RL, King JF: ‘Elevated-temperature tensile and creep-rupture behavior of alloy 800H/ERNiCr-3 weld metal/2·25Cr–1Mo steel dissimilar-metal weldments’; 1982, Oak Ridge, TN, Oak Ridge National Laboratory.10.2172/708749 ↗
40. 10.1016/0308-0161(85)90056-010.1016/0308-0161(85)90056-0 ↗
41. Klueh RL · Weld. J. · 1982 · 61 · 302s
42. Slaughter GM · Weld. J. · 1964 · 43 · 454s
43. Bhaduri AK · Mater. High Temp. · 1992 · 10 · 4510.1080/09603409.1992.11689397 ↗
44. 10.1016/S0029-5493(99)00255-110.1016/S0029-5493(99)00255-1 ↗
45. 10.1179/mst.1994.10.10.91510.1179/mst.1994.10.10.915 ↗
46. 10.1007/BF0115396710.1007/BF01153967 ↗
47. Browne R, Cane BJ, Parker JD, Walters DJ: ‘Creep failure analysis of butt welded tubes’, Proc. Int. Conf. on ‘Creep and fracture of engineering materials and structures’, Swansea, UK, March 1981, Pineridge Press, 645–657.
48. Ainsworth RA: ‘Characterization of creep fracture at interfaces in weldments’, in ‘Recent advances in analytical fracture mechanics and fatigue’, 143–153; 1997, Boston, MA, Kluwer Academic Publishers.10.1016/B978-0-08-042820-8.50019-4 ↗
49. Tucker J · Weld. J. · 1956 · 35 · 529S
50. Emerson RW · Weld. J. · 1962 · 41 · 385
51. Parker JD · Mater. High Temp. · 1994 · 12 · 2510.1080/09603409.1994.11689467 ↗
52. Roberts B: ‘Combustion engineering experience with dissimilar welds’, Proc. Semin. on ‘Dissimilar welds in fossil-fired boilers’, Palo Alto, CA, USA, July 1985, EPRI, I73–I88.
53. King JF · Weld. J. · 1977 · 56 · 119
54. Sartory W: ‘Revised analysis of the transition joint test’; 1984, Oak Ridge, TN, Oak Ridge National Laboratory.
55. Roberts D, Li CC, Nicholson RD: in ‘Dissimilar-weld failure analysis and development program’, Vol. 8: ‘Design and procedure guide for improved welds’; 1989, New York, EPRI.
56. Smith E, Blanchard B, Apps R: in ‘Welding of creep resistant steel’, 79–89; 1970, Cambridge, The Welding Institute.
57. Roy P · Weld. J. · 1986 · 65 · 45S
58. 10.1179/03071698480327487310.1179/030716984803274873 ↗
59. Laha K, Chandravathi KS, Rao KBS: ‘Creep deformation and rupture behavior of 2·25Cr–1Mo steel weldments and its constituents (base metal, weld metal and simulated heat affected zones)’, Proc. 2nd Int. Conf. on ‘Heat resistant materials’, Gatlinburg, TN, USA, September 1995, EPRI, 399–404.
60. Viswanathan R, Gandy D: ‘A review of high temperature performance trends and design rules for Cr–Mo steel weldments’; 1998, Palo Alto, CA, EPRI.
61. 10.2172/612942010.2172/6129420 ↗
62. 10.1007/BF0281202010.1007/BF02812020 ↗
63. 10.1179/02670830322500604210.1179/026708303225006042 ↗
64. 10.1115/1.326443910.1115/1.3264439 ↗
65. Ryder R, Dahms C: ‘Design criteria for dissimilar metal welds’; 1990, New York, Welding Research Council.
66. Parker JD, Byrne T, Dooley R: ‘Ontario hydro’s experience with dissimilar metal welds in boiler tubing’, Proc. Semin. on ‘Dissimilar welds in fossil-fired boilers’, New Orleans, LA, USA, February 1984, EPRI, 3-73–3-109.
67. 10.1179/mst.1985.1.3.22710.1179/mst.1985.1.3.227 ↗
68. Jones W · Weld. J. · 1974 · 53 · 225s
69. 10.1016/j.ijpvp.2005.03.00610.1016/j.ijpvp.2005.03.006 ↗
70. Viswanathan R (ed.), Proc. Semin. on ‘Dissimilar welds in fossil-fired boilers’, Palo Alto, CA, USA, July 1985, EPRI.
71. Farren JD · Weld. J. · 2007 · 86 · 55S
72. Brentrup G: ‘Design, fabrication and testing of graded transition joints for avoiding dissimilar weld failures’, MSc thesis, Lehigh University, Bethlehem, PA, USA, May 2011.
73. DICTRA, Thermo-Calc, Inc., Stockholm, Sweden.
74. 10.1007/BF0265228810.1007/BF02652288 ↗
75. 10.2355/isijinternational.37.113910.2355/isijinternational.37.1139 ↗
76. Unocic RR · Metall. Mater. Trans. B · 2003 · 35 · 14310.1007/s11663-004-0104-7 ↗