Fracture and fatigue behaviour of a laser additive manufactured Zr-based bulk metallic glass
Source abstract
Abstract
Laser additive manufacturing of bulk metallic glass (BMG) provides an effective bypassing of the critical casting thickness constraints that limit the size of components that can be produced; however, open questions remain regarding the resulting mechanical properties. In this work, a Zr-based BMG known as AMZ4 with composition Zr$59.3$Cu$28.8$Nb$1.5$Al$10.4$ was printed using a laser powder bed fusion (LPBF) technique. Micro X-ray computed tomography results together with electron microscopy imaging revealed porous processing defects in LPBF produced AMZ4 that led to a loss in tensile strength. Fatigue crack growth studies revealed a fatigue threshold, $ΔKth$., of ∼1.33 MPa√m and a Paris law exponent of m = 1.14, which are relatively low values for metallic materials. A K$IC$ fracture toughness of 24−29 MPa√m was found for the LPBF BMG samples, which is much lower than the K$_Q$ of 97−138 MPa√m and K$JIC$ of 158−253 MPa√m measured for the cast alloy with the same composition. The lower fracture toughness of the laser processed AMZ4 was attributed to ∼7.5× higher dissolved oxygen in the structure when compared to the cast AMZ4. Despite the higher level of oxygen, the formation of oxide nanocrystals was not observed by transmission electron microscopy. Oxygen induced toughness loss was confirmed by dissolving elevated concentrations of oxygen into cast AMZ4 rods, which led to a reduction in bending ductility and changes in the short-range order of the glass structure, as revealed by synchrotron X-ray diffraction.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · High Entropy Alloys Studies · Glass properties and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. Bulk metallic glasses as structural materials: a review10.1002/adem.201600066 ↗
2. Shear bands in metallic glasses10.1016/j.mser.2013.04.001 ↗
3. A damage-tolerant glass10.1038/nmat2930 ↗
4. Crack-resistance curve of a Zr-Ti-Cu-Al bulk metallic glass with extraordinary fracture toughness10.1016/j.actamat.2012.05.028 ↗
5. Toughness enhancement and heterogeneous softening of a cryogenically cycled Zr–Cu–Ni–Al–Nb bulk metallic glass10.1016/j.actamat.2019.07.012 ↗
6. Cold rolling improves the fracture toughness of a Zr-based bulk metallic glass10.1016/j.jallcom.2016.10.134 ↗
7. Designed heterogeneities improve the fracture reliability of a Zr-based bulk metallic glass10.1016/j.msea.2015.08.055 ↗
8. Processing of bulk metallic glass10.1002/adma.200902776 ↗
9. Processing metallic glasses by selective laser melting10.1016/j.mattod.2013.01.018 ↗
10. Microstructure and mechanical properties of Al–12Si produced by selective laser melting: effect of heat treatment10.1016/j.msea.2013.10.023 ↗
11. 3D printing of Zr-based bulk metallic glasses with complex geometries and enhanced catalytic properties10.1016/j.intermet.2017.12.018 ↗
12. Selective laser melting of Zr-based bulk metallic glasses: processing, microstructure and mechanical properties10.1016/j.matdes.2016.09.071 ↗
13. Additive manufacturing of an iron-based bulk metallic glass larger than the critical casting thickness10.1016/j.apmt.2018.02.011 ↗
14. Glass forming ability, flexural strength, and wear properties of additively manufactured Zr-based bulk metallic glasses produced through laser powder bed fusion
15. Processing a glass-forming Zr-based alloy by selective laser melting10.1016/j.matdes.2017.08.070 ↗
16. Selective laser melting of a Ti-based bulk metallic glass10.1016/j.matlet.2017.10.130 ↗
17. Additive manufacturing of advanced multi-component alloys: bulk metallic glasses and high entropy alloys10.1002/adem.201700874 ↗
18. Porosity of 3D biomaterial scaffolds and osteogenesis10.1016/j.biomaterials.2005.02.002 ↗
19. Selective laser melting manufactured porous Fe-based metallic glass matrix composite with remarkable catalytic activity and reusability
20. Differences in microstructure and properties between selective laser melting and traditional manufacturing for fabrication of metal parts: a review10.1007/s11465-015-0341-2 ↗
21. Additive manufacturing of metallic materials: a review10.1007/s11665-017-2747-y ↗
22. Texture, anisotropy in microstructure and mechanical properties of IN738LC alloy processed by selective laser melting (SLM)10.1016/j.msea.2014.10.003 ↗
23. Microstructure and tensile properties of selectively laser-melted and of HIPed laser-melted Ti-6Al-4V10.1016/j.msea.2013.04.099 ↗
24. Mechanical behavior of selective laser melted 316L stainless steel10.1016/j.msea.2017.04.058 ↗
25. Effects of free volume changes and residual stresses on the fatigue and fracture behavior of a Zr-Ti-Ni-Cu-Be bulk metallic glass10.1016/j.actamat.2007.10.007 ↗
26. Two-stage embrittlement of amorphous Fe40Ni40P20 resulting from a loss of free volume and phase separation10.1016/0001-6160(88)90090-9 ↗
27. Embrittlement of a bulk metallic glass due to sub-Tg annealing10.1016/j.actamat.2004.11.040 ↗
28. Microstructural analysis of Zr55Cu30Al10Ni5 bulk metallic glasses by laser surface remelting and laser solid forming10.1016/j.intermet.2015.06.007 ↗
29. Structural heterogeneity in 3D printed Zr-based bulk metallic glass by selective laser melting10.1016/j.jallcom.2018.01.037 ↗
30. Structural periodicity in laser additive manufactured Zr-based bulk metallic glass10.1063/1.5100050 ↗
31. Mechanical behavior
32. The fracture toughness of bulk metallic glasses10.1007/s11837-010-0052-4 ↗
33. Ductile bulk metallic glass10.1103/PhysRevLett.93.255506 ↗
34. 3D printing of Fe-based bulk metallic glass composites with combined high strength and fracture toughness10.1016/j.matdes.2018.01.061 ↗
35. Relating fracture toughness to micro-pillar compression response for a laser powder bed additive manufactured bulk metallic glass10.1016/j.msea.2019.138535 ↗
36. Processing of a bulk metallic glass forming alloy based on industrial grade Zr10.1016/j.intermet.2012.02.011 ↗
37. ASTM Standard E647-15e1 · 2015
38. Toolbox for advanced x-ray image processing
39. ASTM Standard E399-20 · 2018
40. ASTM Standard E1820-18 · 2018
41. Size-dependent fracture toughness of bulk metallic glasses10.1016/j.actamat.2014.01.062 ↗
42. Flexural strength of ceramic and glass rods
43. Process defects and in situ monitoring methods in metal powder bed fusion: a review related content X-ray computed tomography for additive manufacturing: a review10.1088/1361-6501/aa5c4f ↗
44. 3D pore structure characterization and hardness in a powder bed fusion-processed fully amorphous Zr-based bulk metallic glass10.1016/j.matchar.2020.110178 ↗
45. Heraeus · 2017
46. Fracture of brittle metallic glasses: brittleness or plasticity10.1103/PhysRevLett.94.125510 ↗
47. Fatigue damage in bulk metallic glass II: experiments10.1016/j.scriptamat.2005.10.007 ↗
48. A comparison of the mechanisms of fatigue-crack propagation behavior in a Zr-based bulk amorphous metal in air and an aqueous chloride solution10.1016/S0921-5093(01)01157-1 ↗
49. Fatigue crack growth behavior of a Zr58.5Cu 15.6Ni12.8Al10.3Nb2.8 bulk metallic glass-forming alloy10.1016/j.scriptamat.2010.10.042 ↗
50. Mechanisms of fatigue-crack propagation in ductile and brittle solids10.1023/A:1018655917051 ↗
51. Mapping the cyclic plastic zone to elucidate the mechanisms of crack tip deformation in bulk metallic glasses10.1063/1.4977001 ↗
52. On the understanding of the effects of sample size on the variability in fracture toughness of bulk metallic glasses10.1016/j.actamat.2016.12.054 ↗
53. On the mechanism and the length scales involved in the ductile fracture of a bulk metallic glass10.1016/j.actamat.2012.11.033 ↗
54. Mechanisms for fracture and fatigue-crack propagation in a bulk metallic glass10.1007/s11661-999-0173-y ↗
55. Effect of oxygen concentration upon the ductility of amorphous Zr57Nb5Al10Cu15.4 Ni12.610.1016/j.msea.2005.12.009 ↗
56. Oxygen embrittlement and effect of the addition of Ni element in a bulk amorphous Zr-Cu-Al Alloy10.2320/matertrans.43.571 ↗
57. Industrial grade versus scientific pure: influence on melt properties10.1063/1.5021764 ↗
58. Effect of Al on local structures of Zr-Ni and Zr-Cu metallic glasses10.2320/matertrans.46.2893 ↗
59. Review on quantum mechanically guided design of ultra-strong metallic glasses10.3389/fmats.2020.00089 ↗