journal article·2023-01Open access

Analysis and fast modelling of microstructures in duplex stainless steel formed by directed energy deposition additive manufacturing

Alexander Edwards, Daniel Weisz-Patrault, Éric Charkaluk

Abstract

International audience ; The properties of duplex stainless steels depend strongly on their thermal history, which can produce a wide range of austenite to ferrite ratios; whereas optimal properties generally require near 50-50 ferrite-austenite duplex microstructures. Additive manufacturing processes of duplex steels remain challenging as it is difficult to predict and control how the phase ratio depends on process parameters. This paper focuses on directed energy deposition additive manufacturing and presents a fast numerical modelling of the thermal history and diffusion controlled solid-solid phase transformations in the entire part. The proposed simulations strategy is sufficiently fast to optimize the process parameters to achieve a targeted distribution of phase ratio, and a temperature control strategy of the build platform has been proposed on this basis to reach almost uniform near 50-50 phase ratios, which was obtained by setting the temperature profile of the build platform as a linear function decreasing from 1000~K for the first layer to 800~K for the last layer. In addition, experiments are conducted to validate the proposed approach. Microstructures and phase ratio gradients are assessed in single-bead-thickness walls of SAF~2507 superduplex stainless steel, and numerical results are in reasonable agreement with experimental observations.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Selection of effective manufacturing conditions for directed energy deposition process using machine learning methods10.1038/s41598-021-03622-z ↗
2. Steels in additive manufacturing: A review of their microstructure and properties10.1016/j.msea.2019.138633 ↗
3. Super duplex stainless steels10.1179/mst.1992.8.8.685 ↗
4. Additive manufacturing of duplex stainless steels-A critical review10.1016/j.jmapro.2021.11.036 ↗
5. Duplex stainless steel fabricated by selective laser melting - Microstructural and mechanical properties10.1016/j.matdes.2017.07.046 ↗
6. Influence of hot isostatic pressing post-treatment on the microstructure and mechanical behavior of standard and super duplex stainless steel produced by laser powder bed fusion10.1016/j.msea.2020.139806 ↗
7. Novel ferritic stainless steel formed by laser melting from duplex stainless steel powder with advanced mechanical properties and high ductility10.1016/j.msea.2016.04.027 ↗
8. M. Brázda, P. Salvetr, J. Dlouhỳ, J. Vavřík, Influence of laser power in direct laser deposition on the proportion of ferrite and austenite in duplex steel SAF2507, in: METAL 2020-29th International Conference on Metallurgy and Materials, Conference Proceedings, 2020, pp. 539–544.10.37904/metal.2020.3517 ↗
9. Insight into the microstructural features and corrosion properties of wire arc additive manufactured super duplex stainless steel (ER2594)
10. Additive manufacture of superduplex stainless steel using WAAM10.1051/matecconf/201818803014 ↗
11. Formation of austenite in additively manufactured and post-processed duplex stainless steel alloys10.1007/s11661-019-05562-w ↗
12. A parallelized three-dimensional cellular automaton model for grain growth during additive manufacturing10.1007/s00466-017-1535-8 ↗
13. Three-dimensional grain growth during multi-layer printing of a nickel-based alloy Inconel 718
14. Microstructure modelling of laser metal powder directed energy deposition of alloy 718
15. Thermodynamically consistent microstructure prediction of additively manufactured materials10.1007/s00466-015-1243-1 ↗
16. Modeling of temperature field evolution during multilayered direct laser metal deposition10.1007/s11666-017-0554-5 ↗
17. Predicting microstructure evolution during directed energy deposition additive manufacturing of Ti-6Al-4V10.1115/1.4038894 ↗
18. An analytical computation of temperature field evolved in directed energy deposition10.1115/1.4040621 ↗
19. Guévenoux · 2020
20. Fast simulation of temperature and phase transitions in directed energy deposition additive manufacturing
21. Fast macroscopic thermal analysis for laser metal deposition. application to multiphase steels
22. Residual stresses in thin walled-structures manufactured by directed energy deposition: In-situ measurements, fast thermo-mechanical simulation and buckling
23. Fast simulation of temperature and grain growth in directed energy depostion additive manufacturing
24. Energetic upscaling strategy for grain growth. I: Fast mesoscopic model based on dissipation10.1016/j.actamat.2020.06.032 ↗
25. Energetic upscaling strategy for grain growth. II: Probabilistic macroscopic model identified by Bayesian techniques10.1016/j.actamat.2021.116805 ↗
26. Modelling of materials properties in duplex stainless steels10.1179/026708302225004694 ↗
27. Decomposition kinetics of ferrite in isothermally aged SAF 2507-type duplex stainless steel10.1007/s11665-015-1793-6 ↗
28. Diffusional formation of ferrite in iron and its alloys10.1016/0079-6425(85)90004-0 ↗
29. Numerical modeling of diffusion-controlled phase transformations in ternary systems and application to the ferrite/austenite transformation in the Fe-Cr-Ni system10.1007/BF02670673 ↗
30. Andersson · 1990
31. Evaluation of austenite reformation in duplex stainless steel weld metal using computational thermodynamics10.1007/s40194-013-0104-9 ↗
32. Application of finite element, phase-field, and CALPHAD-based methods to additive manufacturing of Ni-based superalloys10.1016/j.actamat.2017.05.003 ↗
33. Optimizing the cellular automata finite element model for additive manufacturing to simulate large microstructures10.1016/j.actamat.2021.116930 ↗
34. Integrated 2D cellular automata-phase field modeling of solidification and microstructure evolution during additive manufacturing of Ti6Al4V10.1016/j.commatsci.2020.109889 ↗
35. Towards understanding grain nucleation under Additive Manufacturing solidification conditions10.1016/j.actamat.2020.05.012 ↗
36. Grain refinement of Al alloys: Mechanisms determining as-cast grain size in directional solidification10.1016/j.actamat.2005.06.018 ↗
37. Solidification processing10.1007/BF02643923 ↗
38. Thermo-Calc & DICTRA, computational tools for materials science10.1016/S0364-5916(02)00037-8 ↗
39. Bäuerle · 2013
40. Microstructure and texture of duplex stainless steel after melt-spinning processing10.1016/j.matchar.2006.10.022 ↗
41. The effect of cooling rate on the microstructures formed during solidification of ferritic steel10.1007/s11661-000-0095-1 ↗
42. Experimental study of the thermal diffusivity and heat capacity concerning some duplex stainless steel
43. On the nitrogen diffusion in a duplex stainless steel10.1590/1516-1439.337714 ↗
44. On nitrogen diffusion during solution treatment in a high nitrogen austenitic stainless steel10.1016/j.jmrt.2019.12.064 ↗
45. Assessment of the mobilities of Cr, Fe and Ni in bcc Cr-Fe-Ni alloys10.2355/isijinternational.35.1415 ↗
46. Revisiting the influence of the scanning speed on surface topography and microstructure of IN718 thin walls in directed energy deposition additive manufacturing10.1016/j.procir.2022.03.074 ↗