Poly-l-lactic acid: Pellets to fiber to fused filament fabricated scaffolds, and scaffold weight loss study
Source abstract
Abstract
Poly-l-lactic acid (PLLA) is a bioresorbable polymer used in a variety of biomedical applications. Many 3D printers employ the fused filament fabrication (FFF) approach with the ubiquitous low-cost poly-lactic acid (PLA) fiber. However, use of the FFF approach to fabricate scaffolds with medical grade PLLA polymer remains largely unexplored. In this study, high molecular weight PL-32 pellets were extruded into ∼1.7 mm diameter PLLA fiber. Melt rheometric data of the PLLA polymer was analyzed and demonstrated pseudo-plastic behavior with a flow index of n = 0.465 (<1). Differential scanning calorimetry (DSC) was conducted using samples from the extruded fiber to obtain thermal properties. DSC of the 3D printed struts was also analyzed to assess changes in thermal properties due to FFF. The DSC and rheometric analysis results were subsequently used to define appropriate FFF process parameters. Constant porosity scaffolds were FFF 3D printed with 4 distinct laydown patterns; 0/90° rectilinear (control), 45/135° rectilinear, Archimedean chords, and honeycomb using the in-house developed custom multi-modality 3D bioprinter (CMMB). The effect of laydown pattern on scaffold bulk erosion (weight loss) was studied by immersion in phosphate-buffered saline (PBS) over a 6-month period and measured monthly. A repeated measures analysis of variance (ANOVA) was performed to identify statistically significant differences between mean percent weight loss of the four laydown patterns at each time point (1–6 months). The resulting data follows distinct temporal trends, but no statistically significant differences between means at individual time points were found. Cross-sectional scanning electron microscope (SEM) images of the 6-month degraded scaffolds showed noticeable structural deterioration. The study demonstrates successful processing of PLLA fiber from PL-32 pellets and FFF-based 3D printing of bioresorbable scaffolds with pre-defined laydown patterns using medical grade PLLA polymer which could prove beneficial in biomedical applications.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Bone Tissue Engineering Materials · biodegradable polymer synthesis and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Crump · 1992
2. Biodegradable poly(lactic acid) polymers10.1002/jbm.820050305 ↗
3. Mechanical properties of dense polylactic acid structures fabricated by three dimensional printing10.1163/156856297X00588 ↗
4. Nano-fibrous poly(L-lactic acid) scaffolds with interconnected spherical macropores10.1016/j.biomaterials.2003.08.058 ↗
5. Influence of the macro and micro-porous structure on the mechanical behavior of poly (l-lactic acid) scaffolds10.1016/j.jnoncrysol.2012.08.001 ↗
6. 3D printed PLA-based scaffolds10.4161/org.26048 ↗
7. Tubular nanofiber scaffolds for tissue engineered small-diameter vascular grafts10.1002/jbm.a.32081 ↗
8. 3D printing methods of biological scaffolds used in tissue engineering
9. Three-dimensional scaffolds for tissue engineering applications: role of porosity and pore size10.1089/ten.teb.2012.0437 ↗
10. Fabrication and surface modification of macroporous poly (L-lactic acid) and poly (L-lactic-co-glycolic acid)(70/30) cell scaffolds for human skin fibroblast cell culture10.1002/jbm.10318 ↗
11. Scaffolds for tissue fabrication10.1016/S1369-7021(04)00233-0 ↗
12. Scaffold design and fabrication technologies for engineering tissues—state of the art and future perspectives10.1163/156856201744489 ↗
13. Solid freeform fabrication of three-dimensional scaffolds for engineering replacement tissues and organs10.1016/S0142-9612(03)00030-9 ↗
14. Complex heterogeneous tissue constructs containing multiple cell types prepared by inkjet printing technology10.1016/j.biomaterials.2012.09.035 ↗
15. Hierarchical mesoporous bioactive glass/alginate composite scaffolds fabricated by three-dimensional plotting for bone tissue engineering10.1088/1758-5082/5/1/015005 ↗
16. Fabrication and characterization of poly (propylene fumarate) scaffolds with controlled pore structures using 3-dimensional printing and injection molding10.1089/ten.2006.12.2801 ↗
17. Fused deposition modeling of novel scaffold architectures for tissue engineering applications10.1016/S0142-9612(01)00232-0 ↗
18. Fabrication and in vitro characterization of three-dimensional organic/inorganic scaffolds by robocasting10.1002/jbm.a.31237 ↗
19. Scaffold-based tissue engineering: rationale for computer-aided design and solid free-form fabrication systems10.1016/j.tibtech.2004.05.005 ↗
20. Fabrication of computationally designed scaffolds by low temperature 3D printing
21. Biopr nting of a mechanically enhanced three-dimensional dual cell-laden construct for osteochondral tissue engineering using a multi-head tissue/organ building
22. Multi-nozzle deposition for construction of 3D biopolymer tissue scaffolds10.1108/13552540510573347 ↗
23. Printing and prototyping of tissues and scaffolds10.1126/science.1226340 ↗
24. Microstructure from nanostructures to macrostructures for tissue engineering
25. Recent advances in 3D printing of biomaterials10.1186/s13036-015-0001-4 ↗
26. S.H. Teoh, D.W. Hutmacher, K.C. Tan, K.F. Tam, I. Zein, Methods for fabricating a filament for use in tissue engineering, 2004.
27. Mechanical properties and cell cultural response of polycaprolactone scaffolds designed and fabricated via fused deposition modeling10.1002/1097-4636(200105)55:2<203::AID-JBM1007>3.0.CO;2-7 ↗
28. Bone tissue engineering using 3D printing10.1016/j.mattod.2013.11.017 ↗
29. On the capabilities of a multi-modality 3D bioprinter for customized biomedical devices
30. On the development of a modular 3D bioprinter for research in biomedical device fabrication
31. Analyzing the effects of temperature, nozzle-bed distance, and their interactions on the width of fused deposition modeled struts using statistical techniques toward precision scaffold fabrication
32. The influence of thermal treatment on the mechanical characteristics of a PLLA coiled stent10.1002/jbm.b.31286 ↗
33. Influence of thermal annealing on the mechanical properties of PLLA coiled stents10.1007/s13239-014-0189-3 ↗
34. Processing technologies for poly(lactic acid)10.1016/j.progpolymsci.2008.05.004 ↗
35. Melt rheology of poly(lactic acid)/low density polyethylene polymer blends10.4236/aces.2011.14030 ↗
36. Rheological properties of amorphous and semicrystalline polylactic acid polymers10.1016/S0926-6690(99)00009-6 ↗
37. A literature review of poly (Lactic acid)10.1023/A:1020200822435 ↗
38. A review of melt extrusion additive manufacturing processes: I. Process design and modeling10.1108/RPJ-01-2013-0012 ↗
39. Melt flow behaviour of poly-e-caprolactone in fused deposition modelling10.1007/s10856-007-3203-6 ↗
40. A short review on rubber/clay nanocomposites with emphasis on mechanical properties
41. Mathematical modeling of degradation for bulk-erosive polymers: applications in tissue engineering scaffolds and drug delivery systems10.1016/j.actbio.2010.09.038 ↗
42. Comparative observation of accelerated degradation of poly (L-lactic acid) fibres in phosphate buffered saline and a dilute alkaline solution10.1016/S0141-3910(01)00203-8 ↗
43. Ratner · 2004
44. Polylactic acid technology
45. Biodegradable and bioactive porous polymer/inorganic composite scaffolds for bone tissue engineering10.1016/j.biomaterials.2006.01.039 ↗
46. In vitro and in vivo degradability and cytocompatibility of poly(l-lactic acid) scaffold fabricated by a gelatin particle leaching method10.1016/j.actbio.2006.12.008 ↗
47. Fabrication of porous poly(L-lactic acid) scaffolds for bone tissue engineering via precise extrusion10.1016/S1359-6462(01)01094-6 ↗
48. Poly lactic-co-glycolic acid (PLGA) as biodegradable controlled drug delivery carrier10.3390/polym3031377 ↗