The effects of nanoparticle addition on binder removal from injection molded aluminum nitride
Source abstract
Abstract
Abstract The effects of nanoparticle addition on the multi-step debinding of injection molded aluminum nitride (AlN) samples were studied. Experiments varying the solvent debinding conditions (time, temperature and aspect ratio) were performed on monomodal, microscale (μ) and bimodal, micro-nanoscale (μ-n) AlN samples. Variations in the solvent debinding kinetics as a result of the reduced particle size and increased powder content were examined. The bimodal μ-n AlN samples showed a slower solvent extraction of binder components compared to monomodal μ-AlN samples. The activation energy for solvent extraction estimated from diffusion coefficients (Arrhenius equation) was in close agreement with the value estimated by the master debinding curve (MDC) method. An activation value around 50 kJ/mol was estimated by both the methods for μ and μ-n AlN samples. The thermal debinding behavior of dewaxed samples was also studied and the trends correlated with the solvent debinding behavior.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Injection moulding of alumina with partially water soluble binder system and solvent debinding kinetics10.1179/174328407X161196 ↗
2. Injection moulding (review)10.1023/B:PMMC.0000048127.24809.d3 ↗
3. Homogeneity effects on feedstock viscosity in powder injection molding10.1111/j.1151-2916.1994.tb06992.x ↗
4. Solvent debinding behavior of powder injection molded components prepared from powders with different particle sizes10.1007/s11661-005-0148-6 ↗
5. Copper injection molding using a thermoplastic binder based on paraffin wax10.1016/j.matlet.2005.04.027 ↗
6. Optimization of the processing of 8-YSZ powder by powder injection molding for SOFC electrolytes10.1111/j.1744-7402.2008.02286.x ↗
7. Rapid debinding of 316L stainless steel injection moulded component10.1016/S0924-0136(03)00772-6 ↗
8. Review: polymer burnout process in particulate processing10.1080/10426914.2011.560233 ↗
9. Thermal debinding modeling of mass transport and deformation in powder-injection molding compact10.1007/s11663-002-0058-6 ↗
10. Chemistry of removal of ethylene vinyl acetate binders10.1023/A:1017577517999 ↗
11. Thermal removal of multicomponent binder from ceramic injection mouldings10.1016/S0955-2219(02)00015-8 ↗
12. German · 1997
13. Extraction debinding of injection molded parts by condensed solvent
14. In situ dimensional changes of powder injection-molded compacts during solvent debinding10.1016/S1359-6454(98)00093-7 ↗
15. Solvent debinding kinetics of alumina green bodies by powder injection molding10.1016/0272-8842(95)99791-9 ↗
16. Solvent dewaxing: principles and application
17. Ceramic injection moulding: influence of specimen dimensions and temperature on solvent debinding kinetics10.1016/j.jmatprotec.2004.06.008 ↗
18. A model for PEG removal from alumina injection moulded parts by solvent debinding10.1016/j.jmatprotec.2006.08.004 ↗
19. Effect of solvent debinding variables on the shape maintenance of green molded bodies10.1023/B:JMSC.0000026942.64551.97 ↗
20. Mathematical model for condensed-solvent debinding process of PIM10.1016/S0924-0136(03)00648-4 ↗
21. Debinding process of Fe–6Ni–4Cu compact fabricated by metal injection molding10.1143/JJAP.39.616 ↗
22. Effective length scale for predicting solvent-debinding times of components produced by powder injection molding10.1111/j.1151-2916.1999.tb01888.x ↗
23. Powder injection molding of bimodal μ-n silicon carbide and aluminum nitride ceramics
24. Properties of SiC and AlN feedstocks for the powder injection moulding of thermal management devices
25. Master Debinding Curves for Solvent Extraction of Binders in Powder Injection Molding10.1016/j.powtec.2012.04.027 ↗
26. Microstructural development in AlN composite ceramics10.1016/S0965-9773(99)00081-1 ↗
27. Effects of reduction atmosphere and nano carbon powder addition on the deoxidization of injection molded aluminum nitride parts10.1016/j.jmatprotec.2007.11.140 ↗
28. Onbattuvelli VP, Enneti RK, Atre SV. The Effects of Nanoparticle Addition on the Sintering and Properties of Bimodal AlN. Ceram Int in press, http://dx.doi.org/10.1016/j.ceramint.2012.05.028.10.1016/j.ceramint.2012.05.028 ↗