journal article·2020-02

Effect of Ni addition on the densification of TiC: A comparative study of conventional and microwave sintering

Nivedhita Vasudevan, Nuzhet Nihaar Nasir Ahamed, Pavithra B, Ashwath Aravindhan, Balasivanandha Prabu Shanmugavel

Publisher page

Abstract

Abstract This study deals with the effect of conventional sintering and microwave sintering on the densification kinetics of Titanium Carbide (TiC) in the presence of Ni (1, 1.5, 2 wt%). TiC compacts were obtained after uniaxial pressing of powders synthesised by ball milling of Titanium and Carbon and sintering was done in the presence of Nickel. The samples prepared were subjected to conventional as well as microwave sintering. The XRD and SEM analysis were used for a study of the reaction of Ti and C powders upon addition of Ni, which reduced the sintering temperature to 1200 °C. The densification of TiC powders was due to the Ti-Ni eutectic system, the liquid phase formed at this temperature assisting the sintering process. The SEM images revealed the flake like structure of TiC in which the carbon diffused into Ti upon the addition of Ni, thereby supporting enhanced mass transfer. The XRD pattern showed the presence of Titanium Oxide (TiO2) along with TiC which resulted in non-uniform distribution of hardness. Maximum hardness was achieved in the conventional sintered compacts which gradually increased with increase in Ni addition. The presence of the oxide phase and the formation of micro cracks resulted in non-uniform hardness for microwave sintered compacts. The maximum hardness of conventional sintered compact (375 HLD) was nearly 1.5 times more than the maximum hardness of the microwave sintered compact (250 HLD). The density of the microwave sintered compact was found to be higher by 8% than with the conventionally sintered compact.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Synthesis of TiC by controlled ball milling of titanium and carbon10.1007/s10853-006-0291-5 ↗
2. Piersen · 1996
3. A novel ZrB2–C3N4 composite with improved mechanical properties10.1016/j.ceramint.2019.07.144 ↗
4. Synthesis of nanocrystalline TiC powder by mechanical alloying10.1016/S0928-4931(01)00283-1 ↗
5. A numerical approach to the heat transfer and thermal stress in a gas turbine stator blade made of HfB210.1016/j.ceramint.2019.08.112 ↗
6. Numerical analyses of heat transfer and thermal stress in a ZrB2 gas turbine stator blade10.1016/j.ceramint.2019.05.344 ↗
7. Heat transfer, thermal stress and failure analyses in a TiB2 gas turbine stator blade10.1016/j.ceramint.2019.06.184 ↗
8. Mechanical properties of fine-grained substoichiomebic titanium carbide10.1111/j.1151-2916.1983.tb10098.x ↗
9. Elastic deformation, plastic flow, and dislocations in single crystals of titanium carbide10.1063/1.1777197 ↗
10. Influence of SPS parameters on the density and mechanical properties of sintered Ti3SiC2 powders10.1016/j.ijrmhm.2013.01.016 ↗
11. Spark plasma sintering of TiN ceramics codoped with SiC and CNT10.1016/j.ceramint.2018.10.223 ↗
12. Reactive spark plasma sintering of TiB2–SiC–TiN novel composite10.1016/j.ijrmhm.2019.02.022 ↗
13. Structure formation of TiB2-TiC-B4C-C hetero-modulus ceramics via reaction hot pressing10.1016/j.ijrmhm.2017.01.012 ↗
14. Effects of different sintering methods on the properties of SiC-TiC, SiC-TiB2 composites10.1016/j.ijrmhm.2017.09.005 ↗
15. Enhanced sintering through second phase additions10.1179/pom.1985.28.1.7 ↗
16. Spark plasma sintering of TiC–SiCw ceramics10.1016/j.ceramint.2019.06.236 ↗
17. Microstructure and thermomechanical characteristics of spark plasma sintered TiC ceramics doped with nano-sized WC10.1016/j.ceramint.2018.10.125 ↗
18. Effects of spark plasma sintering temperature on densification, hardness and thermal conductivity of titanium carbide10.1016/j.ceramint.2018.05.071 ↗
19. Densification, mechanical and tribological properties of ZrB2 by SPS: effect of pulsed current10.1016/j.ijrmhm.2014.09.004 ↗
20. Densification behavior of ZrB2-MoSi2 ceramics: the formation and evolution of core-shell solid solution structures
21. Ultra-high temperature ceramics: materials for extreme environments10.1016/j.scriptamat.2016.10.018 ↗
22. Nano-sized zirconium carbide powder: synthesis and densification using a spark plasma sintering apparatus10.1016/j.ijrmhm.2017.01.006 ↗
23. Synthesis, densification, and microstructure of TaC-TaB2-SiC ceramics10.1111/jace.15867 ↗
24. Fast densification of ultra-high-temperature ceramics by spark plasma sintering10.1111/j.1744-7402.2006.02060.x ↗
25. Reactive hot pressing of titanium nitride – titanium diboride composites at moderate pressures and temperatures10.1111/j.1151-2916.2004.tb06333.x ↗
26. Reactive hot pressing of Ti-B-C and Ti-C at 1200°C10.1016/j.ceramint.2012.12.016 ↗
27. Spark plasma sintering of pure tungsten powder: densification kinetics and grain growth10.1016/j.powtec.2017.01.050 ↗
28. Effect of Ni content on the reaction behaviors of self-propagating high-temperature synthesis in the Ni-Ti-B4C system10.1016/j.ijrmhm.2007.03.001 ↗
29. Densification and alloying of microwave sintering WC–8 wt. % Co composites10.1016/j.ijrmhm.2013.12.010 ↗
30. Microwave sintering and mechanical properties of PM copper steel10.1179/pom.2001.44.4.355 ↗
31. Microwave versus conventional sintering: a review of fundamentals, advantages and applications10.1016/j.jallcom.2010.01.068 ↗
32. Microwave sintering of W-Ni-Fe alloy10.1016/j.scriptamat.2006.09.010 ↗
33. Effect of Ni addition on pressureless sintering of tungsten diboride10.1016/j.ijrmhm.2013.07.013 ↗
34. Effect of Ni additives on pressureless sintering of SHS ZrB210.1179/174367606X69898 ↗
35. Transient plastic phase processing of titanium–boron–carbon composites10.1111/j.1151-2916.1993.tb03924.x ↗
36. Spark-plasma-sintering (SPS) of nanostructured titanium carbonitride powders10.1016/j.jeurceramsoc.2004.06.008 ↗
37. Microwave sintering of titanium diboride10.1007/BF01184963 ↗
38. The Microwave-Assisted Green Synthesis of TiC Powders10.3390/ma9110904 ↗
39. The liquid–phase sintering of titanium carbide10.1179/pom.1976.19.3.162 ↗
40. Mechanical alloying and milling10.1016/S0079-6425(99)00010-9 ↗
41. Formation mechanism of TiC by mechanical alloying10.1063/1.112596 ↗
42. Investigation of TiC formation during ball-milling of elemental titanium and carbon10.1016/S0263-4368(97)87504-X ↗
43. Oxygen contamination on the surface of ZrB2 powders and its removal10.1016/j.scriptamat.2016.09.020 ↗
44. Vanadium carbide reinforced aluminum matrix composite prepared by conventional, microwave and spark plasma sintering10.1016/j.jallcom.2016.07.063 ↗
45. Investigation on microstructure and mechanical behaviour of Al–ZrB2 composite prepared by microwave and spark plasma sintering10.1016/j.msea.2014.12.096 ↗
46. Simultaneous synthesis and densification of TiC/Ni-Al composites10.1007/BF01130188 ↗
47. Self-propagating high-temperature synthesis mechanisms within the Ti–C–Ni system: a time resolved X-ray diffraction study10.1016/j.powtec.2011.10.061 ↗
48. Time-resolved X-ray diffraction study of solid combustion reactions10.1126/science.249.4975.1406 ↗
49. Dynamic hardness testing of metallic materials10.1016/0308-9126(79)90087-7 ↗