journal article·2025-01

Effect of grain size and orientation on magnetron sputtering yield of tantalum

Kai Yu, Xin Xue, Longfei Xu, Guipeng Li, Xiaodan Zhang, Yuhui Wang

Publisher page

Abstract

The electron beam melting (EBM) technique was employed to prepare ultra-highly pure (99.999 wt%) Tantalum (Ta) cast ingot for application in chips. Subsequently, the Ta cast ingot were forged, rolled, and annealed with different durations to gain three different grain sizes (centimeter scale, 99.8 μm, and 36.7 μm). Sputtering experiments conducted under identical conditions revealed that the rolled target (36.7 μm) film deposition rate was increased by 60.6 % compared to the cast ingot target with a centimeter-scale grain size (columnar crystal). Ta targets with a fine grain size and homogeneous distribution demonstrate superior film deposition performance. The sputtering rate is directly related to the atomic packing density of grains. The (111)-oriented grains of BCC targets (Ta target) exhibit sputtering resistance, and the order of sputtering rate of Ta atoms was S (101) > S (001) > S (111).
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. High-performance interconnects: an integration overview10.1109/5.929646 ↗
2. An RBS study of interdiffusion across a brominated Si(111)/cu interface with and without a barrier layer10.1016/0168-583X(93)96054-G ↗
3. Copper diffusion barrier performance of amorphous ta–Ni thin films10.1016/j.apsusc.2011.11.055 ↗
4. Magnetron sputtering: a review of recent developments and applications10.1016/S0042-207X(99)00189-X ↗
5. Behavior of thin ta-based films in the cu/barrier/Si system10.1116/1.581697 ↗
6. Magnetron sputtering target structure optimization research status10.4028/www.scientific.net/AMM.318.356 ↗
7. Effect of sputter pressure on microstructure and properties of β-ta thin films10.1016/j.actamat.2019.10.056 ↗
8. Effect of sputter pressure on ta thin films: Beta phase formation, texture, and stresses10.1016/j.actamat.2018.02.050 ↗
9. Balanced magnetic field in magnetron sputtering systems10.1016/j.vacuum.2017.02.018 ↗
10. Failure mechanism of ta diffusion barrier between cu and Si10.1063/1.1288692 ↗
11. Preparation of 5N grade tantalum by electron beam melting10.1016/j.jallcom.2008.01.103 ↗
12. Effects of asymmetrical rolling on through-thickness microstructure and texture of body-centered cubic (BCC) tantalum10.1016/j.ijrmhm.2018.08.012 ↗
13. Evolution of dislocations and grain boundaries during multi-axial forging of tantalum10.1016/j.ijrmhm.2023.106120 ↗
14. The influence of target surface morphology on the deposition flux during direct-current magnetron sputtering10.1016/j.tsf.2012.11.097 ↗
15. Correlating discrete orientation and grain size to the sputter deposition properties of tantalum10.1007/s11664-002-0165-9 ↗
16. Effect of grain orientation on tantalum magnetron sputtering yield10.1116/1.2212436 ↗
17. Influence of grain size of cu target on its magnetron sputtering erosion and parameters10.1007/s10854-021-06645-4 ↗
18. Effect of target grain size on target sputter etching morphology and performance10.1016/j.vacuum.2022.111083 ↗
19. Comprehensive effect of grain size and original target morphology on sputtering behavior of magnetron sputtering target10.1016/j.vacuum.2023.111866 ↗
20. A comparative study of clock rolling and unidirectional rolling on deformation/recrystallization microstructure and texture of high purity tantalum plates10.1016/j.ijrmhm.2013.06.003 ↗
21. K Yu, LF Xu, L Wang, GP Li, XD Zhang, YH Wang, Weakening of through-thickness texture gradient in tantalum plates by newly developed dynamic offsets and shear force adjustment rolling. Trans. Nonferrous Metals Soc. China 2024 (prepublish). https://link.cnki.net/urlid/43.1239.TG.20240605.1816.011.
22. Growth of target race track profile during magnetron sputtering10.3131/jvsj2.58.261 ↗
23. Influence of surface morphology on corrosion and electronic behavior10.1016/j.actamat.2005.09.017 ↗
24. Orientation dependent sputter yield of aluminium10.1016/S0257-8972(01)01595-X ↗
25. Influence of the angle of incidence on sputtering yields10.1063/1.1735051 ↗