Volume and size effects of intermetallic compounds on the high-temperature oxidation behavior of Mo-Si-B alloys
Source abstract
Abstract
Abstract In this study, we investigated the high-temperature oxidation behavior of Mo-Si-B alloys with different volume fractions or sizes of intermetallic compound phases. Mo-Si-B alloys with uniformly dispersed intermetallic compound phases (Mo5SIB2 and Mo3Si) in Mo solid solution matrix phase were fabricated using a novel powder metallurgical route, as introduced in our previous study. An isothermal oxidation test was conducted at 1300 °C for up to 10 h. The high-temperature oxidation resistance of Mo-Si-B alloys improved by increasing the volume fraction of intermetallic compound phases; this was a result of the increased amount of protective oxidized layers, which protect the Moss phase from oxidation by covering the surface. In addition, Mo-Si-B alloy with smaller intermetallic compound phases pulverized by high-energy ball milling had better high-temperature oxidation resistance compared to Mo-Si-B alloy with as-synthesized intermetallic compound phases.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. Mo-Si-B alloys: developing a revolutionary turbine-engine material10.1557/mrs2003.191 ↗
2. Boron-doped molybdenum silicides10.1002/adma.19960080118 ↗
3. Assessment of processing routes and strength of a 3-phase molybdenum boron silicide (Mo5Si3-Mo5SiB2-Mo3Si)10.1016/S1359-6462(97)00558-7 ↗
4. Boron-doped molybdenum silicides for structural applications10.1016/S0921-5093(98)01045-4 ↗
5. The microstructural engineering of Mo-Si-B alloys produced by reaction synthesis10.1007/s11837-010-0150-3 ↗
6. Mo-Si-B alloys for ultrahigh-temperature structural applications10.1002/adma.201200764 ↗
7. Processing and mechanical properties of a molybdenum silicide with the composition Mo-12Si-8.5B (at.%)10.1016/S0966-9795(00)00093-5 ↗
8. A Mo–Si–B intermetallic alloy with a continuous α-Mo matrix10.1016/S1359-6462(01)01227-1 ↗
9. Deformation of a multiphase Mo-9.4Si-13.8B alloy at elevated temperatures10.1016/S0966-9795(00)00098-4 ↗
10. Mechanically alloyed Mo-Si-B alloys with a continuous α-Mo matrix and improved mechanical properties10.1016/j.intermet.2008.04.015 ↗
11. Phase continuity in high temperature Mo–Si–B alloys: a FIB-tomography study10.1016/j.intermet.2010.11.003 ↗
12. Fabrication of Mo-Si-B intermetallic powder by mechano-chemical process10.1016/j.jallcom.2013.09.121 ↗
13. Microstructure control of Mo–Si–B alloy for formation of continuous α-Mo phase10.1016/j.ijrmhm.2015.03.006 ↗
14. Structural size effects of intermetallic compounds on the mechanical properties of Mo-Si-B alloy: an experimental investigation10.1007/s12540-015-5497-0 ↗
15. RIR-measurement and use in quantitative XRD10.1017/S0885715600013257 ↗
16. Transient oxidation of Mo–Si–B alloys: effect of the microstructure size scale10.1016/j.actamat.2009.06.036 ↗