Regulation of residual stress in TiAlN coatings by WC-co substrate surface treatment

1. Influence of substrate pre-treatments on residual stresses and tribo-mechanical properties of TiAlN-based PVD coatings10.1016/j.surfcoat.2014.08.075 ↗

2. Optimization of wet micro-blasting on PVD films with various grain materials for improving the coated tools' cutting performance10.1016/j.cirp.2011.03.012 ↗

3. Influence of bias variation on residual stress and texture in TiAlN PVD coatings10.1016/j.surfcoat.2005.02.078 ↗

4. Effect of PVD film's residual stresses on their mechanical properties, brittleness, adhesion and cutting performance of coated tools10.1016/j.cirpj.2016.11.003 ↗

5. Effect of substrate temperature and annealing on structure, stress and properties of reactively co-sputtered Ni-TiN nanocomposite thin films10.1016/j.tsf.2017.01.024 ↗

6. Residual stresses in PVD hard coatings10.1016/0257-8972(95)02581-2 ↗

7. Influence of Ti/TiAlN-multilayer designs on their residual stresses and mechanical properties10.1016/j.apsusc.2011.05.013 ↗

8. K.-D Bouzakis, N Michailidis, S Hadjiyiannis, K Efstathiou, E Pavlidou, G Erkens, S Rambadt, I Wirth, Improvement of PVD coated inserts cutting performance, through appropriate mechanical treatments of substrate and coating surface, Surf. Coat. Technol. 146–147 (2001) 443–450, Doi: https://doi.org/10.1016/S0257-8972(01)01485-2.10.1016/S0257-8972(01)01485-2 ↗

9. Accurate residual stress measurement as a function of depth in environmental barrier coatings via a combination of X-ray diffraction and Raman spectroscopy10.1016/j.ceramint.2020.02.025 ↗

10. Fracture mechanism of TiN coatings on Ti-6Al-4V substrates: role of interfaces and of the residual stress depth profile10.1016/j.surfcoat.2021.127747 ↗

11. Depth-resolved residual stress analysis of thin coatings by a new FIB–DIC method10.1016/j.msea.2011.07.001 ↗

12. Measurement of residual stress in a multi-layer semiconductor heterostructure by micro-Raman spectroscopy10.1007/s10409-016-0591-1 ↗

13. The influence of residual stress on the properties and performance of thick TiAlN multilayer coating during dry turning of compacted graphite iron10.1016/j.wear.2020.203342 ↗

14. Residual stress effects of CMAS infiltration in high temperature jet engine ceramic coatings captured non-destructively with confocal Raman-based 3D rendering10.1016/j.jeurceramsoc.2022.11.003 ↗

15. Bernd · 2020 · vol. 6059 · 61

16. Effects of different distribution of residual stresses in the depth direction on cutting performance of TiAlN coated WC-10wt%co tools in milling Ti-6Al-4V10.1016/j.surfcoat.2020.125972 ↗

17. K.-D Bouzakis, N. Michailidis, S. Hadjiyiannis, K. Efstathiou, E. Pavlidou, G. Erkens, S. Rambadt, I. Wirth, Improvement of PVD coated inserts cutting performance, through appropriate mechanical treatments of substrate and coating surface, Surf. Coat. Technol. 146–147 (2001) 443–450, Doi: https://doi.org/10.1016/S0257-8972(01)01485-2.10.1016/S0257-8972(01)01485-2 ↗

18. Corrosion mechanism investigation of TiAlN/CrN superlattice coating by multi-arc ion plating in 3.5 wt% NaCl solution10.1016/j.surfcoat.2020.125660 ↗

19. Structure and tribological properties of multiphase carbon coatings fabricated by multi-arc ion plating10.1016/j.surfcoat.2023.130319 ↗

20. Surface effects on the growth, adhesion and properties of reactively deposited hard coatings10.1016/0257-8972(95)02652-5 ↗

21. On the influence from micro topography of PVD coatings on friction behaviour, material transfer and tribofilm formation10.1016/j.wear.2010.12.036 ↗

22. Effect of Cr ion etching on the structure and properties of TiAlN-coated cemented carbide10.1016/j.ijrmhm.2023.106357 ↗

23. Influence of preliminary metal-ion etching on the topography and mechanical behavior of TiAlN coatings on cemented carbides10.1016/j.surfcoat.2021.128040 ↗

24. Influences of micro-blasting as surface treatment technique on properties and performance of AlTiN coated tools10.1016/j.jmapro.2017.08.013 ↗

25. Analysis of residual stresses in cutting tools coated via physical vapour deposition: a review10.1016/j.matpr.2023.09.169 ↗

26. Cyclic oxidation behaviour of Ti/TiAlN composite multilayer coatings deposited on titanium alloy10.1016/j.corsci.2020.108476 ↗

27. Raman microscopic studies of residual and applied stress in PVD hard ceramic coatings and correlation with X-ray diffraction (XRD) measurements10.1016/j.surfcoat.2003.10.014 ↗

28. Investigation of the origin of compressive residual stress in CVD TiB2 hard coatings using synchrotron X-ray nanodiffraction10.1016/j.surfcoat.2014.09.050 ↗

29. Mechanical and wear properties of TiN films on differently pretreated TiCN-based cermets10.1016/j.apsusc.2021.151180 ↗

30. Grain-boundary strengthening in nanocrystalline chromium and the hall-Petch coefficient of body-centered cubic metals10.1016/j.scriptamat.2012.09.025 ↗

31. Effects of residual stress on nano-mechanical behavior of thin films

32. Synthesis and characterization of CrN/ Mo2N multilayers and phases of molybdenum nitride10.1016/j.surfcoat.2007.07.090 ↗

33. A hard yet tough CrAlSiN nanocomposite coating for blades deposited by filtered cathode vacuum arc

34. Residual stresses and HRTEM phase interface structures of AlN structured PVD coatings on plate-grained WC-co substrate10.1016/j.ijrmhm.2018.08.002 ↗

35. Residual stress control in CrAlN coatings deposited on Ti alloys10.1016/j.ceramint.2017.12.037 ↗

36. Residual stresses and tribomechanical behaviour of TiAlN and TiAlCN monolayer and multilayer coatings by DCMS and HiPIMS10.1016/j.surfcoat.2020.126664 ↗

37. Adhesive wear mechanism of coated tools and its influence on cutting performance during machining of Zr-based bulk metallic glass10.1016/j.jmrt.2023.11.073 ↗

38. Wear characteristics of PVD coated carbide tools in milling of TA15 titanium alloy

39. Life cycle comprehensive performance assessment of the TiAlN coated tool based on surface treatment10.1016/j.jclepro.2023.139811 ↗

40. Influence of residual stresses in hard tool coatings on the cutting performance10.1016/j.jmapro.2021.08.011 ↗