On anisotropy, strain rate and size effects in vat photopolymerization based specimens
Source abstract
Abstract
Abstract The influence of build orientation, layer thickness, strain rate and size effect on the Young’s modulus, ultimate tensile strength and fracture strains in vat photopolymerization based additively manufactured specimens is investigated. Mechanical testing and subsequent scanning electron microscopy tests on additively manufactured specimens are conducted. Anisotropy in mechanical behavior is only observed in specimens fabricated in different planes. An increase in layer thickness and decrease in strain rate resulted in lower strength, stiffness and higher fracture strains. No significant size effect on strength and failure strains is observed. Cure kinetics is found to have significant influence on mechanical properties of additively manufactured specimens.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Additive Manufacturing Materials and Processes · Photopolymerization techniques and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (90)
Show source-provided references
1. Gibson · 2010
2. Srivatsan · 2015
3. C.W. Hull, Apparatus for production of three-dimensional objects by stereolithography, Google Patents (1986).
4. Additive manufacturing and its societal impact: a literature review10.1007/s00170-012-4558-5 ↗
5. Piazza · 2015
6. D.S. Thomas, S.W. Gilbert, Costs and cost effectiveness of additive manufacturing. US Department of Commerce Consulted at: http://nvlpubs nist gov/nistpubs/Special Publications/NIST SP. (2014) 11, 76.10.6028/NIST.SP.1176 ↗
7. A review of additive manufacturing10.5402/2012/208760 ↗
8. Additive layered manufacturing: sectors of industrial application shown through case studies10.1080/00207540903479786 ↗
9. The design of scaffolds for use in tissue engineering. Part II. Rapid prototyping techniques10.1089/107632702753503009 ↗
10. Chua · 2003
11. Rapid prototyping in tissue engineering: challenges and potential10.1016/j.tibtech.2004.10.004 ↗
12. A review on stereolithography and its applications in biomedical engineering10.1016/j.biomaterials.2010.04.050 ↗
13. Next-generation biomedical implants using additive manufacturing of complex, cellular and functional mesh arrays
14. 3D printing of polymer matrix composites: a review and prospective
15. On the reinforcement of cement mortars through 3D printed polymeric and metallic fibers10.1016/j.compositesb.2015.12.006 ↗
16. Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling10.1016/j.compositesb.2015.06.013 ↗
17. Bimaterial 3D printing and numerical analysis of bio-inspired composite structures under in-plane and transverse loadings10.1016/j.compositesb.2016.09.083 ↗
18. Mechanical properties of FDM and vat photopolymerization low-cost 3-D prints10.1016/j.proeng.2016.01.207 ↗
19. Preparation of starch/acrylonitrile-butadiene-styrene copolymers (ABS) biomass alloys and their feasible evaluation for 3D printing applications10.1016/j.compositesb.2015.10.005 ↗
20. A review of rapid prototyping (RP) techniques in the medical and biomedical sector10.1080/03091900050163427 ↗
21. Anisotropic material properties of fused deposition modeling ABS10.1108/13552540210441166 ↗
22. Role of build orientation in layered manufacturing: a review
23. A review of process planning techniques in layered manufacturing10.1108/13552540010309859 ↗
24. Dependence of mechanical properties of polyamide components on build parameters in the SLS process10.1016/j.jmatprotec.2006.09.007 ↗
25. Topology optimization for additive manufacturing
26. Effects of build orientation on tensile strength for stereolithography-manufactured ASTM D-638 type I specimens10.1007/s00170-009-2066-z ↗
27. Influence of layer thickness on mechanical properties in stereolithography10.1108/13552540610652456 ↗
28. Jacobs · 1992
29. Bártolo · 2011
30. Study of the mechanical properties of photo-cured epoxy resin fabricated by stereolithography process
31. Advances in modeling the effects of selected parameters on the SLS process10.1108/13552549810210257 ↗
32. Material properties and fabrication parameters in selective laser sintering process10.1108/13552549710191836 ↗
33. Ziemian · 2012
34. A study on the influence of process parameters on the mechanical properties of 3D printed ABS composite
35. Characterization and optimization of mechanical properties of ABS parts manufactured by the fused deposition modelling process
36. Mechanical behaviour of ABS: An experimental study using FDM and injection moulding techniques10.1016/j.jmapro.2015.11.002 ↗
37. Isotropic and anisotropic elasticity and yielding of 3D printed material10.1016/j.compositesb.2016.06.009 ↗
38. Effect of layer orientation on mechanical properties of rapid prototyped samples10.1080/10426910008912976 ↗
39. Influence of layer thickness and raster angle on the mechanical properties of 3D-printed PEEK and a comparative mechanical study between PEEK and ABS10.3390/ma8095271 ↗
40. Parametric appraisal of mechanical property of fused deposition modelling processed parts10.1016/j.matdes.2009.06.016 ↗
41. Mechanical properties of components fabricated with open-source 3-D printers under realistic environmental conditions10.1016/j.matdes.2014.02.038 ↗
42. Photopolymerization of powder suspensions for shaping ceramics10.1016/j.jeurceramsoc.2010.12.003 ↗
43. Photopolymers with tunable mechanical properties processed by laser-based high-resolution stereolithography10.1088/0960-1317/18/12/125014 ↗
44. Material and process parameters that affect accuracy in stereolithography
45. Characteristics of photopolymeric material used in rapid prototypes Part I. Mechanical properties in the green state10.1016/S0924-0136(96)02815-4 ↗
46. Investigations on new scanning pattern for stereolithography10.1016/S0007-8506(07)60402-8 ↗
47. Characteristics of photopolymeric material used in rapid prototypes Part II. Mechanical properties at post-cured state10.1016/S0924-0136(96)02816-6 ↗
48. Critical exponents of photoinitiated gelation at different light intensities10.1080/00222340902959719 ↗
49. Kinetic study and new applications of UV radiation curing10.1002/marc.200290014 ↗
50. Standard A. D638 · 2010
51. ASTM D. 3822 · 1996
52. Failure analysis and anisotropy evaluation of 3D-printed tensile test specimens of different geometries and print raster patterns10.1007/s11668-016-0067-4 ↗
53. Fracture surface analysis of 3D-printed tensile specimens of novel ABS-based materials10.1007/s11668-014-9803-9 ↗
54. Karger-Kocsis · 2009
55. Micromechanics of crack growth into a craze in a polymer glass10.1021/ma00041a018 ↗
56. Crazing by disentanglement: non-diffusive reptation10.1016/0032-3861(89)90325-X ↗
57. Kramer · 1990 · vol 2 · 1
58. The mechanical properties of solid polymers10.1088/0508-3443/17/1/302 ↗
59. Hull · 1999
60. On the shape and size of the fracture zones on glass fracture surfaces10.1080/14786436608211968 ↗
61. Precise evaluation of fast fracture velocities in acrylic polymers at the slow-to-fast transition10.1007/BF00980767 ↗
62. Microscopic mechanisms and mechanics of craze growth and fracture10.1080/01418617908239285 ↗
63. Lampman · 2003
64. Curing of composite components by ultraviolet radiation: a review10.1002/pc.20166 ↗
65. Nielsen · 1969
66. Influence of curing modes on crosslink density in polymer structures10.1016/j.jdent.2004.01.012 ↗
67. The effect of cross linking density on the mechanical properties and structure of the epoxy polymers: molecular dynamics simulation10.1007/s00894-013-1906-9 ↗
68. The temperature‐dependence of some mechanical properties of a cured epoxy resin system10.1002/pen.760251305 ↗
69. Photopolymerization kinetics of multifunctional monomers10.1016/S0079-6700(01)00004-1 ↗
70. Study of shrinkage strains in a stereolithography cured acrylic photopolymer resin10.1016/S0924-0136(03)00028-1 ↗
71. Callister · 2007
72. Tension and compression tests of two polymers under quasi-static and dynamic loading10.1016/S0142-9418(01)00055-1 ↗
73. Yielding behaviour in model epoxy thermosets—I. Effect of strain rate and composition10.1016/S0032-3861(97)10334-2 ↗
74. Mechanics of the rate-dependent elastic–plastic deformation of glassy polymers from low to high strain rates10.1016/j.ijsolstr.2005.04.016 ↗
75. The yield behaviour of amorphous polyethylene terephthalate: an activated rate theory approach10.1007/BF01233145 ↗
76. Tensile yield‐stress behavior of poly (vinyl chloride) and polycarbonate in the glass transition region10.1002/pol.1969.160071010 ↗
77. Yield stress behaviour of poly (ethyl methacrylate) in the glass transition region10.1016/0032-3861(65)90056-X ↗
78. The effect of strain rate, temperature, and molecular mass on the tensile deformation of polyethylene10.1002/pen.11180 ↗
79. Theory of non‐newtonian flow. I. Solid plastic system10.1063/1.1722098 ↗
80. Relation between the compression yield stress and the mechanical loss peak of bisphenol-A-polycarbonate in the β transition range10.1007/BF00761956 ↗
81. Strain rate sensitivity of epoxy resin in tensile and shear loading10.1061/(ASCE)0893-1321(2007)20:2(75) ↗
82. Direct measurement of molecular mobility in actively deformed polymer glasses10.1126/science.1165995 ↗
83. The role of molecular mobility in the yielding of solid polymers10.1016/0032-3861(93)90544-K ↗
84. Segmental mobility of polymers near their glass temperature10.1063/1.1698677 ↗
85. Molecular mobility of poly (methyl methacrylate) glass during uniaxial tensile creep deformation10.1002/polb.21774 ↗
86. Zhang · 2008
87. Anseth · 1997
88. Discrepancies in degree of conversion measurements by FTIR
89. Elastic modulus formulae for a crosslinked network
90. Owner: Formlabs, Inc, Date: 18 August, 2018, website: https://formlabs.com/media/upload/Grey-SDS_lQLbyNE.pdf.