journal article·2023-12

A novel method for preparing ultrafine molybdenum‑rhenium alloy powders

Yingjun Wang, Wenlong Liu, Junjun Yuan, Jiancheng Tang

Publisher page

Abstract

To address the issues of large particle size and poor particle size uniformity in the traditional two-step hydrogen reduction method for preparing molybdenum‑rhenium alloy powders, this study innovatively employed glucose as the carbon source and successfully prepared ultrafine molybdenum‑rhenium alloy powders through wet-wet mixing, evaporative crystallization, calcination, carbothermal pre-reduction, and hydrogen deep reduction steps. The results demonstrate that when the C/(Mo + Re) molar ratio is 0.7, the powders synthesized through carbon‑hydrogen synergistic reduction exhibit a spherical shape, with particle sizes distributed in the sub-micrometer range and an average particle size of 173 nm. The phase composition of the reduction powders consists predominantly of molybdenum, rhenium and χ phases, with a uniform distribution of alloy elements. In contrast, the powders synthesized using the traditional two-step hydrogen reduction method exhibit irregular, porous and loosely-packed structures, with particle sizes in tens of microns range and slightly larger than those of the precursor. This method is highly suitable for preparing high-purity, ultrafine, and highly homogeneous binary alloy powders, like Mo Re, Mo W, W Re, ect.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Effect of nano-sized ZrO2 on high temperature performance of Mo-ZrO2 alloy10.1016/j.jallcom.2018.07.214 ↗
2. Densification behaviour of pure molybdenum powder by spark plasma sintering10.1016/j.ijrmhm.2010.03.003 ↗
3. A novel method for preparing ultrafine molybdenum powder10.1016/j.ijrmhm.2021.105491 ↗
4. Size-controlled synthesis of nano Mo powders via reduction of commercial MoO3 with carbon black and hydrogen10.1016/j.ijrmhm.2018.12.019 ↗
5. Effect of rhenium on the brittle fracture threshold of molybdenum10.1007/BF00715883 ↗
6. Alloying to improve the properties of welded molybdenum10.1016/0022-3115(88)90275-9 ↗
7. Klopp · 1972
8. Preparation of ultrafine rhenium powders by CVD hydrogen reduction of volatile rhenium oxides10.1016/S1003-6326(13)62496-6 ↗
9. Low temperature molten salt preparation of molybdenum nanoparticles
10. The synthesis of nanostructured molybdenum under self-propagating high-temperature synthesis mode10.1016/j.matchemphys.2004.08.005 ↗
11. Preparation of nanoporous flake molybdenum powder by sol-gel reduction method10.1016/j.matchar.2022.111879 ↗
12. Manufacturing of Mo-25 re and Mo-50 re alloys by means of powder sintering at medium temperatures
13. The effect of mixing methods on molybdenum alloys containing 3 wt% rhenium10.1016/S0263-4368(97)00007-3 ↗
14. Liu · 1999 · 3 · 4
15. Size-controlled synthesis of nano Mo powders via reduction of commercial MoO3 with carbon black and hydrogen10.1016/j.ijrmhm.2018.12.019 ↗
16. A novel method for preparing ultrafine molybdenum powder - ScienceDirect10.1016/j.ijrmhm.2021.105491 ↗
17. Preparation of ultrafine Mo powders by MoO3 pre-reduction withinsufficient carbon and hydrogen deep reduction
18. A low-cost, efficient, and industrially feasible pathway for large scale preparation of tungsten nanopowders - ScienceDirect10.1016/j.ijrmhm.2018.08.013 ↗
19. Preparation technology and mechanism of tungstennano-powders by carbon assisting hydrogen reduction
20. Study on hydrogen reduction of ultrafine MoO2 to produce ultrafine Mo10.1021/acs.jpcc.5b11394 ↗
21. Developments in measuring and calculating chemical vapor transport phenomena demonstrated on Cr, Mo, W, and their compounds10.1021/cr940313a ↗
22. A study of the impact of reduction conditions on molybdenum morphology10.1016/j.ijrmhm.2017.11.037 ↗
23. Chi-phase precipitation in ion-irradiated molybdenum-rhenium alloys10.1080/01418619008244334 ↗
24. Structural identification of phases in Mo–re alloys within the range from 5 to 95% re10.1016/S0924-0136(03)00342-X ↗
25. Microstructural and mechanical property changes with aging of Mo–41Re and Mo–47.5 re alloys10.1016/j.jnucmat.2007.03.027 ↗