journal article·2022-09

The role of primary α grains in the degree of transformation texture obeying the Burgers orientation relationship in Zr alloys

Yucheng Cao, Tianxian Wu, Liang Xia, Pengfei Feng, Chao Jiang, Ding Chen

Publisher page

Abstract

The microstructure and texture evolution of Zr-xNb-0.4Mo (x = 0, 0.2, 0.4, 0.6 and 1.0 wt%) alloys are characterized using scanning electron microscopy (SEM), transmission electron microscope (TEM) and electron backscatter diffraction (EBSD) technique. The aim is to elucidate the role of primary α grains in the degree of transformation texture obeying the Burgers orientation relationship (OR) in Zr alloys. The primary α grain is produced by adjusting Nb content in Zr alloys. The crystallographic orientations of Zr-xNb-0.4Mo alloys show that the degree of transformation texture obeying the Burgers OR increases with the proportion of primary α grains decreasing. Until no primary α grains exist, the transformation texture obeys the Burgers OR strictly. The primary α grains can exert great influence on variant selection by restricting the growth of high-temperature β grains and acting as nucleation sites. The fact that primary α grains are the origins of variant selection is observed. Meanwhile, variant selection occurs in both the duplex microstructure and full martensite plates during the water-quenching process. The texture weakening of the duplex microstructure is attributed to the new texture components given by martensite plates. In terms of microstructure, a series of precipitates, Zr 3(Nb, Mo, Fe), are found in a primary α grain.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Texture development and anisotropic deformation of zircaloys10.1016/j.pnucene.2005.09.011 ↗
2. On the process of transition of the cubic-body-centered modification into the hexagonal-close-packed modification of zirconium10.1016/S0031-8914(34)80244-3 ↗
3. Effect of self-accommodation on α/α boundary populations in pure titanium10.1016/S1359-6454(03)00035-1 ↗
4. Importance of the α→β transformation in the variant selection mechanisms of thermomechanically processed titanium alloys10.1016/j.scriptamat.2008.05.013 ↗
5. The dynamic responses of lamellar and equiaxed near β-Ti alloys subjected to multi-pass cross rolling10.1016/j.jmst.2019.10.017 ↗
6. Analysis of crystallographic orientation and morphology of microstructure during hot working for an alpha/beta titanium alloy10.1016/j.jmst.2020.06.002 ↗
7. Phase field simulation of the stress-induced α microstructure in Ti–6Al–4V alloy and its CPFEM properties evaluation10.1016/j.jmst.2020.12.085 ↗
8. Multiple α sub-variants and anisotropic mechanical properties of an additively-manufactured Ti-6Al-4V alloy10.1016/j.jmst.2020.06.039 ↗
9. Texture, morphology and deformation mechanisms in β-transformed Zircaloy-410.1016/0022-3115(96)00350-9 ↗
10. Study of the α/β phase transformation of Zy-4 in presence of applied stresses at heating: analysis of the inherited microstructures and textures10.1016/S0022-3115(02)00789-4 ↗
11. Characterization of the variant selection occurring during the α→β→α phase transformations of a cold rolled titanium sheet10.1016/S1359-6454(01)00351-2 ↗
12. Texture memory and variant selection during phase transformation of a zirconium alloy10.1016/j.actamat.2009.07.046 ↗
13. Origins of texture memory in steels
14. Texture changes in the hcp→bcc→hcp transformation of zirconium studied in situ by neutron diffraction10.1016/j.actamat.2003.12.029 ↗
15. Variant selection, coarsening behavior of α phase and associated tensile properties in an α+β titanium alloy10.1016/j.jmst.2021.04.069 ↗
16. Effect of special primary α grain on variant selection of secondary α phase in a near-α titanium alloy10.1016/j.matlet.2020.127766 ↗
17. Preparation and characterization of Zircaloy 4-Tantalum alloys for application in corrosive media10.1016/j.ijrmhm.2012.04.008 ↗
18. Effect of microstructure on corrosion behavior of a Zr–Sn–Nb–Fe–Cu–O alloy10.1016/j.matdes.2015.12.067 ↗
19. Tensile properties and microstructural evolution of Zircaloy-4 processed through rolling at different temperatures10.1016/j.matdes.2016.04.052 ↗
20. Effect of annealing treatment on the microstructure and mechanical properties of a duplex Zr-2.5Nb alloy10.1016/j.msea.2017.08.107 ↗
21. Characterization of different forms of Zr-2.5Nb samples before and after neutron irradiation10.1016/j.msea.2018.01.059 ↗
22. Fiber laser welding characteristics of commercially pure zirconium (R60702) and structure-mechanics-corrosion performances of the joint10.1016/j.ijrmhm.2018.01.023 ↗
23. Irradiation damage and hardening in pure Zr and Zr-Nb alloys at 573 K from self-ion irradiation10.1016/j.matdes.2018.11.017 ↗
24. Variation of microstructural features on the tensile property and corrosion resistance of Zr-Sn-Nb-Fe-Cu alloy10.1016/j.matchar.2019.02.043 ↗
25. Microstructural characterization of Zr1Nb alloy after hot rolling10.1016/j.ijrmhm.2018.12.015 ↗
26. Effects of β-cooling rates on microstructural characteristics and hardness variation of a dual-phase Zr alloy10.1016/j.ijrmhm.2021.105619 ↗
27. Chapter 1 - phases and crystal structures
28. Influence of Nb concentration in the α-matrix on the corrosion behavior of Zr–xNb binary alloys10.1016/j.jnucmat.2003.08.031 ↗
29. Effect of Mo addition on the corrosion resistance of Zr-based alloy in water containing LiOH10.1016/S0022-3115(03)00275-7 ↗
30. Effects of alloying elements on the formation of −component loops in Zr alloy excel under heavy ion irradiation10.1557/jmr.2015.89 ↗
31. Study on recrystallization and correlated mechanical properties in Mo-modified Zr-Nb alloys10.1016/j.msea.2016.03.014 ↗
32. Effect of Nb content on the evolution of β-Zr and Mo2Zr phase in Zr-Nb-Mo alloy during high energy ball milling and annealing10.1016/j.jallcom.2018.10.405 ↗
33. The varied mechanisms of yttrium (Y) modifying a hypoeutectic Al–Si alloy under conditions of different cooling rates10.1016/j.jallcom.2019.07.107 ↗
34. The effects of Y on primary α-Al and precipitation of hypoeutectic Al-Si alloy10.1016/j.matlet.2020.127795 ↗
35. Phase transformation temperatures of Zr alloy Excel10.1016/j.jnucmat.2012.12.037 ↗
36. Re-investigation of phase transformations in the Zr-Excel alloy10.1016/j.jallcom.2017.05.031 ↗
37. Texture analysis with MTEX–free and open source software toolbox10.4028/www.scientific.net/SSP.160.63 ↗
38. The intercept method—2. Determination of spatial grain size10.1016/S1359-6454(96)00198-X ↗
39. Effect of molybdenum on microstructures in Zr-1.2Nb alloys after β-quenching and subsequently 873K annealing10.1016/j.matdes.2016.05.047 ↗
40. Modeling the transformation texture of Ti-64 sheets after rolling in the β-field10.1016/S0921-5093(97)80111-6 ↗
41. Microstructure and texture evolution during thermomechanical processing of β-quenched Zr10.1016/j.actamat.2014.12.033 ↗
42. Variant selection and transformation texture in zirconium alloy excel10.1016/j.jnucmat.2014.06.045 ↗
43. Parent grain reconstruction from partially or fully transformed microstructures in MTEX10.1107/S1600576721011560 ↗
44. Microstructural and textural differences induced by water and furnace cooling in commercially pure Zr annealed in the α+β region10.1007/s12540-018-0079-6 ↗
45. Chapter 7 - diffusional transformations
46. Contribution on the phase equilibria in Zr–Nb–Fe system10.1016/j.jnucmat.2015.09.005 ↗
47. Effects of alloying elements (Sn, Cr and Cu) on second phase particles in Zr-Sn-Nb-Fe-(Cr, Cu) alloys10.1016/j.jallcom.2018.03.203 ↗
48. Retention of metastable β phase in a two-phase quaternary zirconium alloy10.1016/j.matdes.2018.07.021 ↗
49. Texture inheritance and variant selection through an hcp–bcc–hcp phase transformation10.1016/j.actamat.2010.03.012 ↗
50. Leyens · 2003
51. Microstructure and texture evolution of a near-α titanium alloy during hot deformation10.1016/j.msea.2012.11.064 ↗
52. A detailed study of texture changes during alpha–beta processing of a zirconium alloy10.1016/j.jallcom.2019.06.338 ↗
53. Effect of boundary on the alpha phase precipitation in a near-alpha titanium alloy10.1016/j.matlet.2018.09.025 ↗