Ti2AlN MAX phase: An attractive choice for the improvement of mechanical and tribological behavior of ZrB2
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
References (51)
Show source-provided references
1. Reactive hot pressing route for dense ZrB2-SiC and ZrB2-SiC-CNT ultra-high temperature ceramics10.1016/j.jeurceramsoc.2020.07.039 ↗
2. Mechanical and plasma ablation properties of double-interface fibrous ZrB2-SiC ceramics for ultra-high-temperature application10.1016/j.jeurceramsoc.2023.11.034 ↗
3. Oxidation resistance, oxidation mechanism and mechanical properties of ZrB2-SiC-TaB2 ceramics10.1016/j.ceramint.2025.01.195 ↗
4. Thermal shock resistance of ultra-high-temperature ceramics under aerodynamic thermal environments10.2514/1.J051750 ↗
5. Ultrahigh-temperature tensile behaviors of ZrB2 –SiC ceramics10.1111/ijac.14901 ↗
6. Contour maps of mechanical properties in ternary ZrB2-TiC-SiC ceramic system10.1016/j.jeurceramsoc.2024.117059 ↗
7. Refractory diborides of zirconium and hafnium10.1111/j.1551-2916.2007.01583.x ↗
8. Spark plasma sintering of ceramic matrix composite of ZrB2 and TiB2: microstructure, densification, and mechanical properties—a review10.1007/s12540-020-00874-8 ↗
9. Densification of ZrB2-based composites and their mechanical and physical properties: a review10.1016/j.jeurceramsoc.2008.11.008 ↗
10. Microstructure and densification of ZrB2–SiC composites prepared by spark plasma sintering10.1016/j.jeurceramsoc.2009.01.011 ↗
11. Effect of ZrB2 powders on densification, microstructure, mechanical properties and thermal conductivity of ZrB2-SiC ceramics10.1016/j.ceramint.2021.02.158 ↗
12. Oxidation behaviors of ZrB2 –SiC ceramics with different porosity10.1002/adem.202201313 ↗
13. Reactive spark plasma sintering of ZrB2-TiC composites: role of nano-sized carbon black additive10.53063/synsint.2022.22107 ↗
14. Effect of the addition of silicon nitride on sintering behaviour and microstructure of zirconium diboride10.1016/S1359-6462(01)01229-5 ↗
15. Role of Si3N4 on microstructure and hardness of hot-pressed ZrB2−SiC composites10.53063/synsint.2021.1113 ↗
16. Effect of AlN as sintering aid on hot-pressed ZrB2–SiC ceramic composite10.1016/j.jallcom.2008.03.135 ↗
17. Beneficial effects of AlN as sintering aid on microstructure and mechanical properties of hot-pressed ZrB210.1002/adem.200300349 ↗
18. Shmakov · 2022 · 020176
19. ZrB2-MoSi2 ceramics: a comprehensive overview of microstructure and properties relationships. Part I: processing and microstructure10.1016/j.jeurceramsoc.2019.01.022 ↗
20. Combined and alone addition effect of nano carbon black and SiC on the densification and fracture toughness of SPS-sintered ZrB210.1016/j.diamond.2022.109244 ↗
21. Effect of carbon nanotubes on the properties of ZrB2–SiC ceramics10.1016/j.msea.2007.11.027 ↗
22. Effect of HfC addition on the densification and mechanical properties of ZrB2-graphene nanoplatelets composite10.1016/j.ceramint.2025.06.111 ↗
23. A review on conventional and nonconventional machining of SiC particle-reinforced aluminium matrix composites10.1007/s40436-020-00313-2 ↗
24. Microstructure and mechanical properties of (Zr,Ti)B2–SiC composites obtained by pressureless sintering of ZrB2–SiC–TiO2 powder mixtures10.1016/j.ceramint.2023.05.028 ↗
25. Oxidation response of ZrB2–SiC–ZrC composites prepared by spark plasma sintering10.53063/synsint.2022.24134 ↗
26. Novel TiC-based composites with enhanced mechanical properties10.1016/j.jeurceramsoc.2021.05.008 ↗
27. Structure and synthesis of MAX phase materials: a brief review10.1080/10408436.2021.1966384 ↗
28. MAX phases – past, present, and future10.1016/j.mattod.2023.11.010 ↗
29. On the formation mechanisms and properties of MAX phases: a review10.1016/j.jeurceramsoc.2021.02.002 ↗
30. A novel ZrB2-based composite manufactured with Ti3AlC2 additive10.1016/j.ceramint.2020.08.193 ↗
31. Preparation, microstructure, and mechanical properties of TiB2 using Ti3AlC2 as a sintering aid10.1111/j.1551-2916.2012.05204.x ↗
32. Fabrication of SiC ceramics with invariable value resistivity in the range of 20–400°C using MAX phase- Ti3AlC2 additives10.1016/j.jeurceramsoc.2021.06.037 ↗
33. Effect of Ti2AlC on sintering of ultrahigh-temperature ceramics based on HfB2–HfO2–SiC system10.1134/S0036023624603477 ↗
34. Influence of Ti3AlC2 on microstructure and thermal mechanical properties of Al2O3-Ti3AlC2-C refractories10.1016/j.ceramint.2016.06.028 ↗
35. Enhanced ablation resistance and mechanical behavior of spark plasma sintered ZrB2-SiC composites with TiC addition
36. Study of the influence of ZrB2 content and thermal shock on the elastic modulus of spark plasma sintered ZrB2-B4C composites using a non-destructive ultrasonic technique10.1016/j.jeurceramsoc.2023.09.065 ↗
37. Novel (Zr, Ti)B2-(Zr, Ti)C-SiC ceramics via reactive hot pressing10.1016/j.jeurceramsoc.2022.03.056 ↗
38. Reactive hot pressing of ZrB2-SiC composites10.1111/j.1151-2916.2000.tb01558.x ↗
39. Open porosity and grain size effect on the mechanical property of ZrB2-30SiC containing HfB210.1088/2053-1591/ab2e65 ↗
40. HfB2-doped ZrB2-30 vol.% SiC composites: oxidation resistance behavior10.1088/2053-1591/abdf1a ↗
41. The development and application of spark plasma sintering technique in advanced metal structure materials: a review10.1007/s11106-021-00254-w ↗
42. Sample size dependence of high-temperature thermal stability of Ti2AlN MAX phase10.1016/j.ceramint.2023.09.120 ↗
43. Microstructure and tribological behavior of Ti2AlN MAX phase synthesized through mechanical activation–spark plasma sintering method10.1007/s11665-021-06559-6 ↗
44. A critical evaluation of indentation techniques for measuring fracture toughness: I, direct crack measurements10.1111/j.1151-2916.1981.tb10320.x ↗
45. Influence of the mechanical activation process on the corrosion of Ti2AlN MAX phase obtained by hot pressing10.1016/j.ceramint.2024.12.008 ↗
46. Microstructure evolution of polycrystalline Ti2AlN MAX phase film during post-deposition annealing10.1016/j.jeurceramsoc.2018.07.028 ↗
47. Production of TiNi/Ti2AlN multilayer films with different numbers of layers and evolution of tribological and adhesion properties10.1002/adem.202402103 ↗
48. Oxidation of textured Ti2AlN under controlled oxygen partial pressure10.1016/j.jeurceramsoc.2025.117556 ↗
49. Pressureless sintering of zirconium diboride10.1111/j.1551-2916.2005.00739.x ↗
50. Mechanical and thermal properties of bulk ZrB210.1016/j.jnucmat.2015.10.024 ↗
51. Nanostructural and nanoindentation characterization of ZrB2 ceramics toughened with in-situ synthesized ZrC10.1016/j.ijrmhm.2020.105391 ↗