journal article·2019-10

Accelerated refilling speed in rapid stereolithography based on nano-textured functional release film

Li Wang, Yu Luo, Zhiqiang Yang, Wanjing Dai, Xiaoyang Liu, Jingyuan Yang, Bingheng Lu, Lijia Chen

Publisher page

Abstract

Abstract Nowadays, along with the demand for new technologies and new materials, a revolution in 3D printing technology is emerging. In recent years, stereolithography 3D printing has been widely used in both academia and industry, due to its fast forming speed, high precision, and low-cost advantages. The continuous liquid interface production technology has made the printing speed even faster. However, the process of resin refilling constrains the printing speed and the printing capabilities of such technologies, since only hollow structures can be fabricated. In this study, a nano-textured hydrophobic PDMS contacting layer and an oxygen-permeable membrane were bonded together as the functional release film. The oxygen inhibition layer was successfully maintained by the molecular oxygen permeated through the composite release film, achieving rapid stereolithography, and key factors that affecting resin refilling are selectively studied by the orthogonal experiment. Crucially, according to the simulation and experimental results, the adoption of the hydrophobic nano-texture not only increased the refilling speed of the resin by two times and reduced the printing time by nearly 25%, but also improved the printing reliability by reducing the vacuum (negative pressure) caused by the original slow refilling speed. Additionally, optical simulations also demonstrated that the nano-texture would not influence the curing effect of the resin. This work proposed a promising strategy for rapid stereolithography of 3D models containing larger cross-sectional areas.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nanofabrication and Lithography Techniques · Additive Manufacturing and 3D Printing Technologies · 3D Printing in Biomedical Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Barnatt · 2013
2. LAN HongBo · 2015
3. A review on 3D micro-additive manufacturing technologies10.1007/s00170-012-4605-2 ↗
4. Light curing strategies for lithography-based additive manufacturing of customized ceramics
5. Optical 3D printing: bridging the gaps in the mesoscale10.1088/2040-8986/aab3fe ↗
6. Photosensitive naturally derived resins toward optical 3-D printing10.1117/1.OE.57.4.041412 ↗
7. Photoinitiator free resins composed of plant-derived monomers for the optical μ-3D printing of thermosets10.3390/polym11010116 ↗
8. Douglass · 2013
9. Vaneker · 2015
10. Digital material fabrication using mask‐image‐projection‐based stereolithography10.1108/13552541311312148 ↗
11. Oxygen-controlled bottom-up mask-projection stereolithography for ceramic 3D printing10.1016/j.ceramint.2017.08.014 ↗
12. Additive manufacturing. Continuous liquid interface production of 3D objects10.1126/science.aaa2397 ↗
13. Layerless fabrication with continuous liquid interface production10.1073/pnas.1605271113 ↗
14. Separation force analysis and prediction based on cohesive element model for constrained-surface Stereolithography processes
15. Effect of constrained surface texturing on separation force in projection stereolithography10.1115/1.4040322 ↗
16. Study of separation force in constrained surface projection stereolithography10.1108/RPJ-12-2015-0188 ↗
17. Gritsenko · 2017
18. Effect of PDMS cross-linking degree on the permeation performance of PAN/PDMS composite nanofiltration membranes10.1016/j.seppur.2005.04.001 ↗
19. Kinetic approach of oxygen inhibition in ultraviolet- and laser-induced polymerizations10.1021/ma00148a034 ↗
20. Flexible organic light-emitting diodes with enhanced light out-coupling efficiency fabricated on a double-sided nanotextured substrate10.1021/am501521p ↗
21. Numerical investigation on drag reduction with hydrophobic surface by lattice Boltzmann method
22. Multicomponent lattice-Boltzmann model with interparticle interaction10.1007/BF02179985 ↗
23. Huang, Q.-G., G. Pan, and B.-W. Song, Lattice Boltzmann simulation of slip flow and drag reduction characteristics of hydrophobic surfaces.
24. A perfectly matched layer for the absorption of electromagnetic waves10.1006/jcph.1994.1159 ↗
25. Performance boost of organic light-emitting diodes with plasmonic nanostars10.1002/adom.201500702 ↗
26. Resistance of Solid Surfaces to Wetting by Water10.1021/ie50320a024 ↗