Simulation-based process optimization of laser-based powder bed fusion by means of beam shaping
Source abstract
Abstract
Laser powder bed fusion of metals (PBF-LB/M) is an additive manufacturing technique which has recently been growing in popularity in industrial use cases. However, several challenges persist, including the issue of solidification cracking observed in widely used Ni-based superalloys. Through retrofitting an existing PBF machine with a dual beam system capable of dynamic beam shaping, it is possible to overcome this issue. The appropriate process parameters for the laser beam need to be determined prior to manufacturing the system. In this regard we propose a methodology that utilizes a numerical simulation tool to identify optimized parameters. To demonstrate the effectiveness of this approach, two example processes are presented. Initially the numerical model is validated by comparing its results against experimental data obtained from single track scans of two metal powders, CM247LC and IN713LC. Subsequently, an optimization study is conducted to identify optimal combinations of differently shaped and sized primary and secondary beams. The goal is to reduce the cooling rates within certain critical temperature ranges, thus mitigating the likelihood of solidification cracking, while avoiding the occurrence of other process defects such as balling, porosity, or lack of fusion. The effectiveness of these beam shapes is then verified through the production of physical samples. Through this example, a methodology for leveraging physics-based, model-driven process optimization is presented. Additionally, insights into the potential application of the same model for large-scale simulations are provided.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Manufacturing Process and Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Additive manufacturing of metallic components – Process, structure and properties10.1016/j.pmatsci.2017.10.001 ↗
2. Laser powder bed fusion for metal additive manufacturing: perspectives on recent developments10.1080/17452759.2020.1779999 ↗
3. Scientific, technological and economic issues in metal printing and their solutions10.1038/s41563-019-0408-2 ↗
4. URL https://shapeyourlaser.eu.
5. Freeform beam shaping with multi-plane light conversion for 1.07 μ m ultra-high throughput laser-based material macroprocessing
6. A numerical investigation of laser beam welding of stainless steel sheets with a gap10.3390/app11062549 ↗
7. Mechanistic models for additive manufacturing of metallic components10.1016/j.pmatsci.2020.100703 ↗
8. Progress towards a complete model of metal additive manufacturing
9. Keyhole threshold and morphology in laser melting revealed by ultrahigh-speed x-ray imaging10.1126/science.aav4687 ↗
10. A critical look at the prediction of the temperature field around a laser-induced melt pool on metallic substrates10.1038/s41598-021-91039-z ↗
11. A 3D transient model of keyhole and melt pool dynamics in laser beam welding applied to the joining of zinc coated sheets10.1007/s11740-008-0148-7 ↗
12. Fluid dynamical simulation of high speed micro welding10.2351/1.5040652 ↗
13. Numerical analysis of process dynamics in laser welding of Al and Cu10.1016/j.procir.2018.08.040 ↗
14. Multi-physical simulation of laser welding10.1016/j.phpro.2014.08.059 ↗
15. A multiphysical simulation model for laser based manufacturing
16. Buttazzoni · 2020
17. Multiphysical simulation of ns-laser ablation of multi-material LED-structures10.1016/j.phpro.2014.08.057 ↗
18. Numerical simulation of laser ablation with short and ultra-short pulses for metals and semiconductors10.1016/j.phpro.2016.08.141 ↗
19. Rapid formation of high aspect ratio through holes in thin glass substrates using an engineered, QCW laser approach10.1007/s00339-022-05404-4 ↗
20. A tensorial approach to computational continuum mechanics using object-oriented techniques10.1063/1.168744 ↗
21. Evaluating the performance of the two-phase flow solver interfoam10.1088/1749-4699/5/1/014016 ↗
22. Multiphysical simulation of laser material processing10.1016/j.phpro.2012.10.109 ↗
23. Hügel · 2009
24. A fixed grid numerical modelling methodology for convection-diffusion mushy region phase-change problems10.1016/0017-9310(87)90317-6 ↗
25. Kolasinski · 2012
26. Evaporation model for keyhole dynamics during additive manufacturing of metal
27. Shell-and-tube type latent heat thermal energy storage: numerical analysis and comparison with experiments10.1007/s00231-011-0866-9 ↗
28. Surface forces, surface tension, and adhesion
29. Álvarez · 2019
30. A review on discrete element method simulation in laser powder bed fusion additive manufacturing
31. The prediction of the emissivity and ThermalConductivity of powder beds10.1080/02726350490501682 ↗
32. Measurement of thermo physical properties of nickel based superalloys
33. Selective laser melting of iron-based powder10.1016/j.jmatprotec.2003.11.051 ↗
34. Single track formation in selective laser melting of metal powders10.1016/j.jmatprotec.2010.05.010 ↗
35. A review of spatter in laser powder bed fusion additive manufacturing: In situ detection, generation, effects, and countermeasures10.3390/mi13081366 ↗
36. Nickel based superalloy welding practices for industrial gas turbine applications10.1179/136217104225017099 ↗
37. Experimental investigation into microstructure, mechanical properties, and cracking mechanism of IN713LC processed by laser powder bed fusion
38. Vedani · 2019
39. Hallberg · 2018
40. Rahimian · 2015
41. Surface tension of binary metal - Surface active solute systems under conditions relevant to welding metallurgy10.1007/BF02657748 ↗
42. A model to calculate surface tension of commercial alloys10.1007/s10853-005-1930-y ↗
43. Calculation of thermophysical properties of Ni-based superalloys10.2355/isijinternational.46.623 ↗
44. Thermal properties of cast nickel based superalloys