Toughening of Diglycidyl Ether of Bisphenol-A Epoxy Resin Using Poly (Ether Ether Ketone) with Pendent Ditert-Butyl Groups

Poly(ether ether ketone) (PEEKDT), hydroxyl terminated poly(ether ether ketone) (PEEKDTOH) and fluorine terminated poly (ether ether ketone) (PEEKDTF) with pendent ditert-butyl groups were synthesized by the nucleophilic substitution reaction of 4,4′-difluorobenzophenone with 2,5-ditert-butylhydroquinone in N-methyl-2-pyrrolidone medium using anhydrous potassium carbonate as catalyst. Diglycidyl ether of bisphenol-A epoxy resin was blended with PEEKDT, PEEKDTOH, and PEEKDTF, and cured with 4,4′-diaminodiphenylsulfone (DDS). The polymers formed heterogeneous blends before curing, and upon curing the polymers got dispersed in the epoxy matrix. The mechanical properties of the cured blends were slightly lower than that of the unmodified resin. The fracture toughness increased with the addition of ditert-butyl PEEK into epoxy resin and the extent of improvement was dependent on the type of modifier used. Hydroxyl terminated polymers gave up to 40% increase in fracture toughness. The dynamic mechanical spectrum of the blends showed only a single Tg due to the proximity of the glass transition temperature of modified PEEK and DDS cured epoxy resin.