Mechanical response, twinning, and texture evolution of WE43 magnesium-rare earth alloy as a function of strain rate: Experiments and multi-level crystal plasticity modeling
Source abstract
Abstract
Abstract This work adapts a recently developed multi-level constitutive model for polycrystalline metals that deform by a combination of elasticity, crystallographic slip, and deformation twinning to interpret the deformation behavior of alloy WE43 as a function of strain rate. The model involves a two-level homogenization scheme. First, to relate the grain level to the level of a polycrystalline aggregate, a Taylor-type model is used. Second, to relate the aggregate level response at each finite element (FE) integration point to the macro-level, an implicit FE approach is employed. The model features a dislocation-based hardening law governing the activation stress at the slip and twin system level, taking into account the effects of temperature and strain rate through thermally-activated recovery, dislocation debris formation, and slip-twin interactions. The twinning model employs a composite grain approach for multiple twin variants and considers double twinning. The alloy is tested in simple compression and tension at a quasi-static deformation rate and in compression under high strain rates at room temperature. Microstructure evolution of the alloy is characterized using electron backscattered diffraction and neutron diffraction. Taking the measured initial texture as inputs, it is shown that the model successfully captures mechanical responses, twinning, and texture evolution using a single set of hardening parameters, which are associated with the thermally activated rate law for dislocation density across strain rates. The model internally adjusts relative amounts of active deformation modes based on evolution of slip and twin resistances during the imposed loadings to predict the deformation characteristics. We observe that WE43 exhibits much higher strain-hardening rates under high strain rate deformation than under quasi-static deformation. The observation is rationalized as primarily originating from the pronounced activation of twins and especially contraction and double twins during high strain rate deformation. These twins are effective in strain hardening of the alloy through the texture and barrier hardening effects.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. ASTM B951-11 · 2011
2. ASTM E8/E8M-15a · 2015
3. On the deformation twinning of Mg AZ31B: a three-dimensional synchrotron X-ray diffraction experiment and crystal plasticity finite element model10.1016/j.ijplas.2015.03.001 ↗
4. Room temperature formability of a magnesium AZ31 alloy: examining the role of texture on the deformation mechanisms10.1016/j.msea.2007.11.056 ↗
5. Sheet texture modification in magnesium-based alloys by selective rare earth alloying10.1016/j.msea.2011.01.080 ↗
6. Effect of dislocation density-twin interactions on twin growth in AZ31 as revealed by explicit crystal plasticity finite element modeling10.1016/j.ijplas.2017.09.002 ↗
7. Strain rate and temperature sensitive multi-level crystal plasticity model for large plastic deformation behavior: application to AZ31 magnesium alloy10.1016/j.ijplas.2016.04.005 ↗
8. Explicit modeling of double twinning in AZ31 using crystal plasticity finite elements for predicting the mechanical fields for twin variant selection and fracture analyses10.1016/j.actamat.2018.07.045 ↗
9. Explicit incorporation of deformation twins into crystal plasticity finite element models10.1016/j.cma.2015.07.003 ↗
10. The plasticity of highly oriented nano-layered Zr/Nb composites10.1016/j.actamat.2016.05.058 ↗
11. Texture development and strain hardening in rate dependent polycrystals10.1016/0001-6160(85)90188-9 ↗
12. Strain hardening regimes and microstructural evolution during large strain compression of low stacking fault energy fcc alloys that form deformation twins10.1007/s11661-997-0109-3 ↗
13. Avedesian · 1999 · 27
14. Twinning and the ductility of magnesium alloys: Part I: "Tension" twins10.1016/j.msea.2006.12.037 ↗
15. Twinning and the ductility of magnesium alloys: Part II. "Contraction" twins10.1016/j.msea.2007.02.109 ↗
16. Transformation of slip dislocations during twinning of copper-aluminum alloy crystals. Revue de Metallurgie
17. A dislocation-based constitutive law for pure Zr including temperature effects10.1016/j.ijplas.2007.07.017 ↗
18. Slip mode dependency of dislocation shearing and looping of precipitates in Mg alloy WE4310.1016/j.actamat.2017.12.043 ↗
19. Demonstration of alloying, thermal activation, and latent hardening effects on quasi-static and dynamic polycrystal plasticity of Mg alloy, WE43-T5, plate10.1016/j.ijplas.2016.01.005 ↗
20. The texture and anisotropy of magnesium–zinc–rare earth alloy sheets10.1016/j.actamat.2006.11.013 ↗
21. Hardening in relation with microstructure evolution of high purity α−titanium deformed under monotonic and cyclic simple shear loadings at room temperature10.1016/j.msea.2011.12.033 ↗
22. Bulk texture evolution of nanolamellar Zr–Nb composites processed via accumulative roll bonding10.1016/j.actamat.2015.03.020 ↗
23. Bone–implant interface strength and osseointegration: biodegradable magnesium alloy versus standard titanium control10.1016/j.actbio.2010.08.020 ↗
24. Discrete twin evolution in Mg alloys using a novel crystal plasticity finite element model10.1016/j.actamat.2018.02.032 ↗
25. Magnesium technology and manufacturing for ultra lightweight armored ground vehicles
26. Reorientation and stress relaxation due to twinning: modeling and experimental characterization for Mg10.1016/j.actamat.2008.01.057 ↗
27. Deformation in wrought Mg− 9Wt pct Y10.1007/BF03037872 ↗
28. OpenMP and MPI implementations of an elasto-viscoplastic fast Fourier transform-based micromechanical solver for fast crystal plasticity modeling10.1016/j.advengsoft.2018.09.010 ↗
29. A crystal plasticity theory for latent hardening by glide twinning through dislocation transmutation and twin accommodation effects10.1016/j.jmps.2009.12.004 ↗
30. Annihilation of dislocations during tensile and cyclic deformation and limits of dislocation densities10.1080/01418617908234871 ↗
31. Three-dimensional investigation of grain boundary–twin interactions in a Mg AZ31 alloy by electron backscatter diffraction and continuum modeling10.1016/j.actamat.2013.09.005 ↗
32. On the microstructural factors affecting creep resistance of die-cast Mg–La-rare earth (Nd, Y or Gd) alloys10.1016/j.msea.2016.08.046 ↗
33. Effect of hot working and aging heat treatments on monotonic, cyclic, and fatigue behavior of WE43 magnesium alloy10.1016/j.msea.2019.01.056 ↗
34. Ghorbanpour · 2019 · 219
35. Low cycle fatigue behavior of direct metal laser sintered Inconel alloy 71810.1016/j.ijfatigue.2016.08.019 ↗
36. Role of grain structure, grain boundaries, crystallographic texture, precipitates, and porosity on fatigue behavior of Inconel 718 at room and elevated temperatures10.1016/j.matchar.2019.01.028 ↗
37. Role of solute in the texture modification during hot deformation of Mg-rare earth alloys10.1007/s11661-011-0923-5 ↗
38. Effect of rare earth additions on microstructure and texture development of magnesium alloy sheets10.1016/j.scriptamat.2009.12.033 ↗
39. Precipitation strengthening and reversed yield stress asymmetry in Mg alloys containing rare-earth elements: a quantitative study10.1016/j.actamat.2016.11.019 ↗
40. Bounds and self-consistent estimates for creep of polycrystalline materials
41. A review on the effect of rare-earth elements on texture evolution during processing of magnesium alloys10.1007/s10853-016-0371-0 ↗
42. Enhancement of orientation gradients during simple shear deformation by application of simple compression10.1063/1.4922032 ↗
43. Rate and temperature dependent deformation behavior of as-cast WE43 magnesium-rare earth alloy manufactured by direct-chill casting10.1016/j.msea.2017.11.092 ↗
44. Deformation and fracture mechanisms in WE43 magnesium-rare earth alloy fabricated by direct-chill casting and rolling10.1016/j.msea.2018.04.090 ↗
45. Deformation twinning in rolled WE43-T5 rare earth magnesium alloy: influence on strain hardening and texture evolution10.1016/j.actamat.2017.03.075 ↗
46. Modeling the temperature dependent effect of twinning on the behavior of Mg alloy AZ31 sheet10.1016/j.msea.2006.03.160 ↗
47. Rare earth texture and improved ductility in a Mg-Zn-Gd alloy after high-speed extrusion10.1016/j.msea.2016.04.093 ↗
48. Incorporation of deformation twinning in crystal plasticity models10.1016/S0022-5096(97)00051-3 ↗
49. Exploring the dislocation/twin interactions in zirconium10.1016/j.msea.2006.09.115 ↗
50. Hierarchical crystal plasticity FE model for nickel-based superalloys: sub-grain microstructures to polycrystalline aggregates10.1016/j.ijsolstr.2014.03.037 ↗
51. Magnesium: commodity or exotic?10.1179/174328407X154374 ↗
52. Crystal plasticity simulations using discrete Fourier transforms10.1016/j.actamat.2008.12.017 ↗
53. Multiscale modeling of microstructure-property relationships of polycrystalline metals during thermo-mechanical deformation10.1002/adem.201700956 ↗
54. A polycrystal plasticity model for predicting mechanical response and texture evolution during strain-path changes: application to beryllium10.1016/j.ijplas.2013.03.008 ↗
55. A strain-rate and temperature dependent constitutive model for BCC metals incorporating non-Schmid effects: application to tantalum–tungsten alloys10.1016/j.ijplas.2014.07.007 ↗
56. Anisotropic stress-strain response and microstructure evolution of textured α-uranium10.1016/j.actamat.2011.10.041 ↗
57. Deformation behavior of the cobalt-based superalloy Haynes 25: experimental characterization and crystal plasticity modeling10.1016/j.actamat.2013.10.021 ↗
58. Material-based design of the extrusion of bimetallic tubes10.1016/j.commatsci.2014.07.021 ↗
59. Computationally efficient database and spectral interpolation for fully plastic Taylor-type crystal plasticity calculations of face-centered cubic polycrystals10.1016/j.ijplas.2007.12.002 ↗
60. Procedures for reducing large datasets of crystal orientations using generalized spherical harmonics10.1016/j.mechmat.2015.04.014 ↗
61. Modeling bending of α-titanium with embedded polycrystal plasticity in implicit finite elements10.1016/j.msea.2012.11.037 ↗
62. Deformation twinning in AZ31: influence on strain hardening and texture evolution10.1016/j.actamat.2010.07.041 ↗
63. Integration of self-consistent polycrystal plasticity with dislocation density based hardening laws within an implicit finite element framework: application to low-symmetry metals10.1016/j.jmps.2013.05.005 ↗
64. Modeling mechanical response and texture evolution of α-uranium as a function of strain rate and temperature using polycrystal plasticity10.1016/j.ijplas.2012.10.011 ↗
65. Strain rate and temperature effects on the selection of primary and secondary slip and twinning systems in HCP Zr10.1016/j.actamat.2015.01.037 ↗
66. A numerical procedure enabling accurate descriptions of strain rate-sensitive flow of polycrystals within crystal visco-plasticity theory10.1016/j.cma.2016.05.025 ↗
67. First-principles study of hc + ai dislocations in Mg
68. Numerical study of the stress state of a deformation twin in magnesium10.1016/j.actamat.2014.10.048 ↗
69. An elasto-viscoplastic formulation based on fast Fourier transforms for the prediction of micromechanical fields in polycrystalline materials10.1016/j.ijplas.2011.12.005 ↗
70. A self-consistent anisotropic approach for the simulation of plastic deformation and texture development of polycrystals: application to zirconium alloys10.1016/0956-7151(93)90130-K ↗
71. In situ X-ray diffraction and crystal plasticity modeling of the deformation behavior of extruded Mg–Li–(Al) alloys: an uncommon tension–compression asymmetry10.1016/j.actamat.2014.12.003 ↗
72. Characterization of precipitate phases in a Mg–Dy–Gd–Nd alloy10.1016/j.jallcom.2006.08.059 ↗
73. Effect of rare-earth element Sm on the corrosion behavior of Mg-6Al-1.2Y-0.9Nd alloy10.1007/s12598-010-0168-2 ↗
74. Hardening evolution of AZ31B Mg sheet10.1016/j.ijplas.2006.03.005 ↗
75. From dislocation junctions to forest hardening10.1103/PhysRevLett.89.255508 ↗
76. Automatic twin statistics from electron backscattered diffraction data10.1111/j.1365-2818.2009.03343.x ↗
77. Kinetics of flow and strain-hardening10.1016/0001-6160(81)90112-7 ↗
78. Structure evolution of a WE43 Mg alloy submitted to different thermal treatments10.1016/j.msea.2007.06.016 ↗
79. Meyers · 1998
80. Profuse slip transmission across twin boundaries in magnesium10.1016/j.actamat.2016.11.022 ↗
81. Precipitation and hardening in magnesium alloys10.1007/s11661-012-1217-2 ↗
82. Characterisation of strengthening precipitate phases in a Mg–Y–Nd alloy10.1016/S1359-6454(00)00013-6 ↗
83. Characterisation of precipitate phases in magnesium alloys using electron microdiffraction10.1016/S0968-4328(00)00094-9 ↗
84. Modeling the effect of twinning and detwinning during strain path changes of Mg alloy AZ3110.1016/j.ijplas.2008.05.005 ↗
85. Modeling texture, twinning and hardening evolution during deformation of hexagonal materials10.1016/j.actamat.2006.11.017 ↗
86. Elevated temperature effects on the plastic anisotropy of an extruded Mg-4 Wt pct Li alloy: experiments and polycrystal modeling10.1007/s11661-016-3780-4 ↗
87. Ductility improvement of Mg alloys by solid solution: ab initio modeling, synthesis and mechanical properties10.1016/j.actamat.2014.02.011 ↗
88. Structural interpretation of the nucleation and growth of deformation twins in Zr and Ti–II. Tem study of twin morphology and defect reactions during twinning10.1016/0956-7151(94)00434-X ↗
89. Observation of {11 2 1} twinning in a Mg-based alloy10.1080/09500830802070793 ↗
90. The origin of “rare earth” texture development in extruded Mg-based alloys and its effect on tensile ductility10.1016/j.msea.2008.05.045 ↗
91. The effect of high yttrium solute concentration on the twinning behaviour of magnesium alloys10.1016/j.actamat.2014.09.022 ↗
92. A constitutive model for hcp materials deforming by slip and twinning: application to magnesium alloy AZ31B10.1016/S0749-6419(03)00039-1 ↗
93. Plastic strain in metals
94. Modeling texture, twinning and hardening evolution during deformation of hexagonal materials10.4028/www.scientific.net/MSF.495-497.1001 ↗
95. A model for texture development dominated by deformation twinning: application to zirconium alloys10.1016/0956-7151(91)90083-D ↗
96. Mechanical response of zirconium: I. Derivation of a polycrystal constitutive law and finite element analysis10.1016/S1359-6454(01)00190-2 ↗
97. Simulation of the rolling and shear texture of brass by the Taylor theory adapted for mechanical twinning10.1016/0001-6160(78)90111-6 ↗
98. A comprehensive mathematical formulation of an extended taylor-bishop-hill model featuring relaxed constraints, the Renouard-Wintenberger theory and a strain rate sensitivity model10.1155/TSM.8-9.313 ↗
99. Texture measurements using the new neutron diffractometer HIPPO and their analysis using the Rietveld method10.1154/1.1649961 ↗
100. Evaluation of self-consistent polycrystal plasticity models for magnesium alloy AZ31B sheet10.1016/j.ijsolstr.2010.06.016 ↗