An efficient 2D discrete dislocation Dynamics-XFEM coupling framework and its application to polycrystal plasticity

Abstract A new efficient framework coupling the two dimensional (2D) discrete dislocation dynamics (DDD) and the extended finite element method (XFEM) is developed for modeling the dynamic evolution of multiple dislocations in crystalline materials with abundant interfaces/surfaces. By a specially introduced stress calculation scheme with cut-off radius and virtual elements, the present algorithm can capture interaction between neighboring dislocations accurately although no time-consuming dislocation-core enrichment is employed. Since it is not sensitive to the FE mesh size and large XFEM time step can be used, its efficiency is evidently improved compared with other DDD frameworks. Due to the merits of XFEM itself, the present DDD-XFEM scheme can treat intractable surface/interface problems conveniently, with no additional image stress calculation as in the DDD-FEM superposition framework and special plastic-strain distribution near the surfaces/interfaces as in the discrete-continuous method (DCM) needed. For these, it can be used to model plastic behaviors of crystals with abundant interfaces/surfaces (i.e. grain/phase boundaries and crack/void surfaces). To show the ability of present DDD-XFEM scheme, it is used to simulate the mechanical responses of polycrystalline aluminum with assumed rigid and penetrable grain boundaries. A three-stage model for dislocation penetrating through grain boundary (DPTGB) is suggested. The results show that the present DDD-XFEM scheme can capture the formation of dislocation pile-ups and thus the Hall-Petch effect successfully. The DPTGB can decrease the flow stress and hardening rate evidently; moreover, it can weaken the grain size effect and may enhance the cyclic stress relaxation of polycrystals greatly.