A diffusion, oxidation reaction and large viscoelastic deformation coupled model with applications to SiC fiber oxidation
Source abstract
Abstract
Abstract In this paper, we present a continuum-level thermodynamically consistent oxidation model that couples large viscoelastic deformation, diffusion and oxidation reaction. Constitutive equations are derived by means of the free energy inequality. The Eyring model for the shear stress dependence of viscosity is adopted to describe the viscous deformation. Subsequently, this model is applied to study the oxidation processes of SiC fibers. A sharp interface between the oxide and substrate naturally develops and propagates forward during the oxidation process. Furthermore, the stresses at the outer surface change from the initial compressive state to tensile due to the viscous deformation and significant volumetric swelling at the interface, which may explain the surface cracking observed in experiments. Notably, the present model can be conveniently used to simulate the oxidation processes that involve complex geometrical shapes without the need to mark and track the interface artificially.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. A thermodynamically consistent constitutive model for diffusion-assisted plasticity in Ni-based superalloys10.1016/j.ijplas.2017.12.007 ↗
2. An internal state variable material model for predicting the time, thermomechanical, and stress state dependence of amorphous glassy polymers under large deformation10.1016/j.ijplas.2012.10.005 ↗
3. Multiscale analysis of the transverse properties of Ti-based matrix composites reinforced by SiC fibers: from the grain scale to the macroscopic scale10.1016/j.ijplas.2003.09.001 ↗
4. Combining mechanical and chemical effects in the deformation and failure of a cylindrical electrode particle in a Li-ion battery10.1016/j.ijsolstr.2014.11.006 ↗
5. Multiscale modeling and simulation of silicon carbide oxidation10.1002/pssc.200881509 ↗
6. Micromechanical analysis of strain rate-dependent deformation and failure in composite microstructures under dynamic loading conditions10.1016/j.ijplas.2011.10.008 ↗
7. Peridynamic modeling of pitting corrosion damage10.1016/j.jmps.2015.02.015 ↗
8. A kinetic model for oxidation of Si-Al-O-N materials10.1111/j.1551-2916.2006.00959.x ↗
9. Kinetics of high-temperature oxidation of inorganic nonmetallic materials10.1111/j.1551-2916.2008.02903.x ↗
10. A finite deformation stress-dependent chemical potential and its applications to lithium ion batteries10.1016/j.jmps.2012.03.008 ↗
11. General relationship for the thermal oxidation of silicon10.1063/1.1713945 ↗
12. Micromechanical modeling of shock-induced chemical reactions in heterogeneous multi-material power mixtures10.1016/S0749-6419(00)00065-6 ↗
13. Diffusion and stress coupling effect during oxidation at high temperature10.1111/jace.12105 ↗
14. Viscoplastic response of electrode particles in Li-ion batteries driven by insertion of lithium10.1016/j.ijsolstr.2013.10.033 ↗
15. Viscosity, plasticity, and diffusion as examples of absolute reaction rates10.1063/1.1749836 ↗
16. Thermodynamics analysis of ZrB2-SiC oxidation: formation of a SiC-depleted region10.1111/j.1551-2916.2006.01329.x ↗
17. On liquid diffusion10.1080/14786445508641925 ↗
18. Local shrinkage and stress induced by thermo-oxidation in composite materials at high temperatures10.1016/j.jmps.2010.12.001 ↗
19. Review of stress fields in Zirconium alloys corrosion scales10.1016/j.corsci.2015.03.004 ↗
20. Continuum and atomistic models of strongly coupled diffusion, stress, and solute concentration10.1016/j.jpowsour.2010.06.080 ↗
21. Oxidation transitions for SiC part II. Passive-to-Active transitions10.1111/jace.12104 ↗
22. Growth stress in SiO2 during oxidation of SiC fibers10.1063/1.3698305 ↗
23. Oxidation kinetics strength of Hi-NicalonTM-S SiC fiber after oxidation in dry and wet air10.1111/jace.14833 ↗
24. Hi-NicalonTM-S fiber oxidation and scale crystallization kinetics10.1111/j.1551-2916.2011.04647.x ↗
25. Relationship between fiber strength, passive oxidation and scale crystallization kinetics of Hi-NicalonTM-S SiC fibers
26. Oxidation transitions for SiC part I. Active-to-Passive transitions10.1111/jace.12108 ↗
27. Thermo-oxidative ageing of elastomers: a modelling approach based on a finite strain theory10.1016/j.ijplas.2014.01.012 ↗
28. A theory for stress-driven interfacial damage upon cationic-selective oxidation of alloys10.1016/j.jmps.2008.09.001 ↗
29. Diffusion and reactions of interstitial oxygen species in amprphous SiO2: a review10.1016/j.jnoncrysol.2007.07.038 ↗
30. Oxygen exchange at the internal surface of amorphous SiO2 studied by photoluminescence of isotopically labeled oxygen molecules10.1103/PhysRevLett.102.175502 ↗
31. Two-dimensional thermal oxidation of silicon. II. Modeling stress effects in wet oxides10.1109/16.2412 ↗
32. Interfacial reaction-dominated full oxidation of 5nm diameter silicon nanowires10.1063/1.4764004 ↗
33. Anisotropic compositional expansion in elastoplastic materials and corresponding chemical potential: large-strain formulation and application to amorphous lithiated silicon10.1016/j.jmps.2014.04.012 ↗
34. A defect-based viscoplastic model for large-deformed thin film electrode of lithium-ion battery
35. A chemo-thermo-mechanically coupled theory for elastic-viscoplastic deformation, diffusion, and volumetric swelling due to a chemical reaction10.1016/j.ijplas.2011.04.001 ↗
36. An eletrochemical-irradiated plasticity model for metallic electrodes in lithium-ion batteries10.1016/j.ijplas.2016.10.009 ↗
37. Modelling of the swelling induced by oxidation in SiC-based refractory castables10.1016/j.mechmat.2013.09.001 ↗
38. Evolution of stresses in a simple class of oxidation problems10.1007/s00707-005-0281-8 ↗
39. Modelling environment degradation of SiC-based fibers10.1111/jace.14086 ↗
40. A model for oxidation of ZrB2, HfB2 and TiB210.1016/j.actamat.2007.07.027 ↗
41. Viscoelastic material behavior: models and discretization used in process simulator DIOS10.1109/16.870589 ↗
42. A study of intergranular fracture in an aluminium alloy due to hydrogen embrittlement10.1016/j.ijplas.2012.01.004 ↗
43. Chemical potential-based analysis for the oxidation kinetics of Si and SiC single crystals10.1111/jace.12464 ↗
44. On modelling thermal oxidation of silicon I: theory10.1002/(SICI)1097-0207(20000110/30)47:1/3<341::AID-NME774>3.0.CO;2-Z ↗
45. On modelling thermal oxidation of silicon II: numerical aspects10.1002/(SICI)1097-0207(20000110/30)47:1/3<359::AID-NME775>3.0.CO;2-7 ↗
46. Stress-induced roughness development during oxide scale growth on a metallic alloy for SOFC interconnects10.1088/0965-0393/19/1/015009 ↗
47. Oxidation behavior of Si-C-O fibers (Nicalon) under oxygen partial pressures from 102 to 105 Pa at 1773K10.1111/j.1151-2916.2000.tb01681.x ↗
48. General approach on chemistry and stress coupling effects during oxidation10.1063/1.4826530 ↗
49. Two-dimensional simulation of pattern-dependent oxidation of silicon nanostructures on silicon-on-insulator substrates10.1016/j.sse.2003.12.019 ↗
50. Polymorphism of iron at high pressure: a 3D phase-field model for displacive transitions with finite elastoplastic deformations10.1016/j.jmps.2016.01.016 ↗
51. A thermodynamic consistent damage and healing model for self healing materials10.1016/j.ijplas.2010.11.002 ↗
52. Oxidation of curved silicon surfaces10.1149/1.2100485 ↗
53. A review of SiC fiber oxidation with a new study of Hi-Nicalon SiC fiber oxidation10.1002/adem.201600166 ↗
54. A continuum thermo-inelastic model for damage and healing in self-healing glass materials10.1016/j.ijplas.2014.06.011 ↗
55. Recent advances in metallic interconnects for solids oxide fuel cells10.1179/174328007X212526 ↗
56. Oxidation behavior of Hi-Nicalon SiC monofilament fibres in air and O2-H2O-Ar atmospheres10.1016/j.corsci.2011.12.019 ↗
57. A hygro-thermo-mechanical coupled cyclic constitutive model for polymers with considering glass transition10.1016/j.ijplas.2016.11.001 ↗
58. Effect of interface reaction and diffusion on stress-oxidation coupling at high temperature10.1063/1.5025149 ↗
59. A coupled theory for chemically active and deformable solids with mass diffusion and heat conduction10.1016/j.jmps.2017.06.013 ↗
60. Elasto-plastic phase field modelling of oxidation of zirconium alloys10.1016/j.ijsolstr.2017.10.033 ↗
61. Isogeometric analysis of mechanically coupled Cahn-Hilliard phase segregation in hyperelastic electrodes of Li-ion batteries10.1016/j.cma.2015.09.008 ↗
62. Stress-oxidation interaction in selective oxidation of Cr-Fe alloys10.1016/j.mechmat.2009.09.007 ↗
63. A thermo-chemo-mechanical model for the oxidation of zirconium diboride10.1111/jace.13333 ↗