Study on Hydrogen Production Characteristics by Methanol Steam Reforming in a Fresnel Lens-Tapered Cavity Solar Thermal Concentric-Tube Reactor
Source abstract
Abstract
The endothermic nature of methanol steam reforming (MSR) for hydrogen production induces varying thermal effects along the flow direction, resulting in a non-uniform temperature distribution within the catalytic bed. Optimizing temperature uniformity has been demonstrated to enhance hydrogen production efficiency. In this study, a novel Fresnel lens-driven non-evacuated tapered cavity solar reactor was proposed for methanol steam reforming, which can provide a reference for optimizing hydrogen production using Fresnel lens solar concentrators. The thermal flux distribution on the reactor’s inner walls was determined by Monte Carlo ray-tracing simulations. A three-dimensional CFD model integrating fluid flow, heat and mass transfer, and methanol steam reforming reaction kinetics was developed to investigate the effects of key operational parameters on this novel reactor performance. Multi-objective optimization using response surface methodology revealed that high reactant inlet temperature (Tin > 550 K) and low flow velocity (uin < 0.2 m/s) conditions significantly improve reactor methanol conversion (99.99%) and hydrogen yield (91.48%), but at the cost of increased CO selectivity (SCO > 28%). Conversely, low temperature (Tin < 500 K) and high flow velocity (uin > 0.4 m/s) conditions suppress CO formation (SCO < 0.03%), although with reduced hydrogen production efficiency.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Catalysts for Methane Reforming · Chemical Looping and Thermochemical Processes · Subcritical and Supercritical Water Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Energy and Power Engineering, Chongqing University, Chongqing 400044, China
Key Laboratory of Low-Grade Energy Utilization Technologies and Systems, Ministry of Education, Chongqing University, Chongqing 400044, China
Funding
Chongqing Academy of Science and Technology
References (67)
Show source-provided references
1. Numerical investigation of the thermophysical characteristics of the mid-and-low temperature solar receiver/reactor for hydrogen production10.1016/j.ijheatmasstransfer.2016.02.012 ↗
2. Investigation on the hydrogen production by methanol steam reforming with engine exhaust heat recovery strategy10.1016/j.ijhydene.2016.01.100 ↗
3. Analysis and enhancement of methanol reformer performance for online reforming based on waste heat recovery of methanol-diesel dual direct injection engine10.1016/j.energy.2023.129098 ↗
4. Performance and emissions of a direct injection internal combustion engine devised for joint operation with a high-pressure thermochemical recuperation system10.1016/j.energy.2017.02.074 ↗
5. Transport enhancement study on small-scale methanol steam reforming reactor with waste heat recovery for hydrogen production10.1016/j.energy.2019.03.157 ↗
6. Effects of particle sizes on methanol steam reforming for hydrogen production in a reactor heated by waste heat10.1016/j.ijhydene.2018.07.163 ↗
7. Effect of the vacancy close to heat exchange wall on the heat transfer performance of the solid particles steam generator using waste heat in a methanol steam reforming hydrogen production system10.1016/j.ijhydene.2022.07.084 ↗
8. Methanol steam reforming by heat-insulated warm plasma catalysis for efficient hydrogen production10.1016/j.cattod.2019.03.068 ↗
9. Comprehensive study on catalytic coating tubular reactor with electromagnetic induction heating for hydrogen production through methanol steam reforming10.1016/j.ijhydene.2023.07.316 ↗
10. Integrated methanol reforming and oxidation in wash-coated microreactors: A three-dimensional simulation10.1016/j.ijhydene.2011.11.015 ↗
11. Design and test of a miniature hydrogen production reactor integrated with heat supply, fuel vaporization, methanol-steam reforming and carbon monoxide removal unit10.1016/j.ijhydene.2012.01.021 ↗
12. A thermally autonomous methanol steam reforming microreactor with porous copper foam as catalyst support for hydrogen production10.1016/j.ijhydene.2020.11.111 ↗
13. Li, J.M. (2023). Flow and Heat Transfer Characteristics and Hydrogen Production Performance of a Pin Fin Reactor for Autothermal Methanol Reforming, Chongqing University. (In Chinese).
14. Solar thermal power cycle with integration of methanol decomposition and middle-temperature solar thermal energy10.1016/j.solener.2004.06.019 ↗
15. Solar hydrogen production integrating low-grade solar thermal energy and methanol steam reforming10.1115/1.3068336 ↗
16. Experimental investigation of hydrogen production integrated methanol steam reforming with middle-temperature solar thermal energy10.1016/j.apenergy.2008.03.006 ↗
17. Renewable hydrogen production by solar-powered methanol reforming10.1016/j.ijhydene.2016.02.086 ↗
18. Numerical optimization of catalyst configurations in a solar parabolic trough receiver–reactor with non-uniform heat flux10.1016/j.solener.2015.08.012 ↗
19. A three-dimensional simulation of a mid-and-low temperature solar receiver/reactor for hydrogen production10.1016/j.solener.2016.05.003 ↗
20. A new solar receiver/reactor structure for hydrogen production10.1016/j.enconman.2016.11.058 ↗
21. Experimental investigation and thermodynamic analysis of effective hydrogen production driven by mid- and low-temperature solar heat10.1016/j.jclepro.2017.12.177 ↗
22. A comprehensive study on parabolic trough solar receiver-reactors of methanol-steam reforming reaction for hydrogen production10.1016/j.enconman.2019.02.068 ↗
23. Advances in phase change materials and nanomaterials for applications in thermal energy storage10.1007/s11356-023-31718-8 ↗
24. A comprehensive review on enhanced phase change materials (PCMs) for high-performance thermal energy storage: Progress, challenges, and future perspectives10.1007/s10973-025-14301-w ↗
25. Prototype of middle-temperature solar receiver/reactor with parabolic trough concentrator10.1115/1.2769698 ↗
26. Operational performance of the development of a 15kW parabolic trough mid-temperature solar receiver/reactor for hydrogen production10.1016/j.apenergy.2011.04.050 ↗
27. A new modelling method and unified code with MCRT for concentrating solar collectors and its applications10.1016/j.apenergy.2012.07.048 ↗
28. Comparative and sensitive analysis for parabolic trough solar collectors with a detailed monte carlo ray-tracing optical model10.1016/j.apenergy.2013.11.001 ↗
29. Numerical study of mixed convection in uniformly heated air-based tubular cavity receiver of solar parabolic trough concentrator with different boundary conditions10.18280/ijht.410102 ↗
30. High temperature solar thermal central-receiver billboard design10.1016/j.solener.2013.09.008 ↗
31. Study on optical and thermal performance of a linear fresnel solar reflector using molten salt as HTF with MCRT and FVM methods10.1016/j.apenergy.2015.01.135 ↗
32. Influence of the displacement of solar receiver tubes on the performance of a parabolic-trough collector10.1016/j.energy.2018.06.148 ↗
33. Study on Comprehensive Performance of Linear Fresnel Solar Methanol Reforming Hydrogen Production System Based on Packed Bed Model
34. Outdoor direct solar-driven massive photo-thermo-catalytic reforming of methanol into hydrogen at lower temperature10.1016/j.ijhydene.2022.12.111 ↗
35. Proposal of a novel modular photo-thermo-reactor system for cascaded hydrogen production from methanol steam reforming10.1016/j.enconman.2022.115390 ↗
36. Direct solar-thermal scalable-decomposition of methanol flowing through a nanoparticle-packed bed reactor under outdoor environment10.1016/j.energy.2023.128187 ↗
37. A novel multi-objective optimization model of solar-driven methanol steam reforming system combining response surface methodology and three-dimensional numerical simulation10.1016/j.enconman.2023.117986 ↗
38. Theoretical analysis of a novel, portable, CPC-based solar thermal collector for methanol reforming10.1016/j.apenergy.2014.01.033 ↗
39. Hydrogen production optimization from methanol steam reforming using box-behnken design, analysis of variance, and artificial neural network10.1016/j.ijhydene.2024.10.086 ↗
40. Optimization of methanol steam reforming over a au/CuO–CeO2 catalyst by statistically designed experiments10.1016/j.fuproc.2011.12.024 ↗
41. Experimental investigation and performance optimisation of a catalytic reforming micro-reactor using response surface methodology10.1016/j.enconman.2019.111983 ↗
42. Thermal performance comparison of line- and point-focus solar concentrating systems: Experimental and numerical analyses10.1016/j.solener.2016.03.062 ↗
43. Optical and thermal performance enhancement of parabolic dish collector: Effects of cavity receiver’s surface modification and covering aperture10.1016/j.icheatmasstransfer.2024.107540 ↗
44. Cui, J. (2014). Experimental Study on Single Disc Type Solar Collector System Performance, Lanzhou University of Technology. (In Chinese).
45. Xie, W.T. (2013). Investigation on Thermal Performance of Fresnel Solar Collectors and Analysis on Heat Removal Factors, Shanghai Jiao Tong University. (In Chinese).
46. Experimental investigation of thermal performance enhancement of cavity receiver with bottom surface interior convex10.1016/j.applthermaleng.2019.114847 ↗
47. Investigation of steam generation performance on conical cavity receiver by different geometric concentration ratios for fresnel lens solar concentrator
48. Application of thermal energy storage with point focus fresnel lens concentrator: Numerical and experimental analysis10.1016/j.est.2019.101008 ↗
49. Research on the characteristics of hydrogen production by methanol steam reforming in a fresnel lens concentrated tubular reactor10.1016/j.ijhydene.2024.07.099 ↗
50. Zhou, Y.Z. (2019). Design and Study of Optical-Thermal Performance on Point Focus and Transmissive Fresnel Collecor, Beijing University of Technology. (In Chinese).
51. Wang, H. (2023). Comparative study of a fixed-focus fresnel lens solar concentrator/conical cavity receiver system with and without glass cover installed in a solar cooker. Sustainability, 15.10.3390/su15129450 ↗
52. Yan, Q.W. (2019). Research on Performance and Structure Optimization of Cavity Receivers in Solar Power Tower System, Southeast University. (In Chinese).
53. Nield, D.A., and Bejan, A. (2013). Convection in Porous Media, Springer.10.1007/978-1-4614-5541-7 ↗
54. Boundary and inertia effects on flow and heat transfer in porous media10.1016/0017-9310(81)90027-2 ↗
55. Numerical investigations on coupled heat transfer and synthetical performance of a pressurized volumetric receiver with MCRT–FVM method10.1016/j.applthermaleng.2012.08.045 ↗
56. Performance enhancement of double-jacketed methanol steam reforming reactor
57. Numerical study of methanol–steam reforming and methanol–air catalytic combustion in annulus reactors for hydrogen production10.1016/j.apenergy.2012.06.010 ↗
58. Impact of built-in coiled tube diameter on the optical-thermal conversion characteristics of receiver
59. Methanol–steam reforming on Cu/ZnO/Al2O3. Part 1: The reaction network10.1016/S0926-860X(98)00298-1 ↗
60. Methanol–steam reforming on Cu/ZnO/Al2O3 catalysts. Part 2. A comprehensive kinetic model10.1016/S0926-860X(98)00299-3 ↗
61. Numerical study on a novel solar-thermal-reaction system for clean hydrogen production of methanol-steam reforming10.1016/j.renene.2024.119952 ↗
62. Experimental and Microscopic Mechanism Investigation of Photo-Thermal Methanol Steam Reforming for Hydrogen Production
63. Numerical study on induction heating enhanced methanol steam reforming for hydrogen production10.1016/j.decarb.2024.100075 ↗
64. Electrocatalytic lignin oxidation for hydrogen and fine chemical co-production using platinized nickel foam in a 3D printed reactor10.1016/j.decarb.2024.100074 ↗
65. Zhao, B.Y. (2022). Study on the Characteristics of Hydrogen Production from Methane Steam Reforming Under Concentrated Solar Radiation, North China University of Science and Technology. (In Chinese).
66. Synergic effect investigation of carbon monoxide and other compositions on the high temperature proton exchange membrane fuel cell10.1016/j.renene.2023.05.008 ↗
67. An onboard hydrogen generator for hydrogen enhanced combustion with internal combustion engine10.1016/j.ijhydene.2017.03.013 ↗