Dynamic Failure Pressure Prediction and Risk-Based Early Warning for Oil and Gas Pipelines Using a Long Short-Term Memory–DNV-RP-F101 Coupled Model
Source abstract
Abstract
Accurate assessment of pipeline defect integrity and proactive risk warning are essential for the safe, reliable, and economical transportation of oil and gas. Existing approaches are largely based on static assessment models, such as the Det Norske Veritas Recommended Practice for corroded pipelines (DNV-RP-F101), and often produce conservative failure-pressure predictions because time-dependent defect evolution and operational pressure fluctuations are not considered. To address this limitation, this study develops a dynamic defect-growth–failure-pressure coupling model that integrates a long short-term memory (LSTM) network with an enhanced DNV-RP-F101 framework. Time-varying axial and circumferential correction coefficients are introduced to update the bulging factor dynamically, thereby supporting defect-growth prediction and time-variant failure-pressure calculation. The model is validated against four established standards using public pipeline datasets. For single defects, the proposed model achieves the lowest mean square error (MSE) of 0.81 MPa and an average error of 1.18 MPa among the compared methods. For defect clusters, the prediction error remains within 8.64%. A five-level dynamic risk-warning system is further established by integrating Monte Carlo simulation with API 579 standards, enabling quantification of failure probability and prediction of remaining service life. Engineering case studies show that the proposed method can identify the time points at which pipelines enter hazardous failure-probability stages. This capability supports more precise early warning and provides a technical basis for intelligent pipeline integrity management and predictive maintenance.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Structural Integrity and Reliability Analysis · Geotechnical Engineering and Underground Structures · Water Systems and Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
PLA Rocket Force Engineering University, Xi’an 710025, China
College of Mechanical and Transportation Engineering, China University of Petroleum, Beijing 102249, China
School of Petroleum and Natural Gas Engineering, Changzhou University, Changzhou 213164, China
Jiangsu Key Laboratory of Oil-Gas & New-Energy and Transportation Technology, Changzhou University, Changzhou 213164, China
Funding
PLA Rocket Force University of Engineering
References (31)
Show source-provided references
1. Bibliometric Analysis of Oil and Gas Pipeline Safety10.1007/978-3-031-44947-5_90 ↗
2. Stress corrosion cracking behavior of buried oil and gas pipeline steel under the coexistence of magnetic field and sulfate-reducing bacteria10.1016/j.petsci.2023.10.013 ↗
3. Load-Bearing Capacity of X80 Dented Pipelines under Typical Loads10.1007/s11668-023-01827-0 ↗
4. Putkiranta, P., Kurkela, M., Ingman, M., Keitaanniemi, A., El Issaoui, A., Kaartinen, H., Honkavaara, E., Hyyppä, H., Hyyppä, J., and Vaaja, M.T. (2021). Performance Assessment of Reference Modelling Methods for Defect Evaluation in Asphalt Concrete. Sensors, 21.10.3390/s21248190 ↗
5. Prediction of oil pipeline process operating parameters based on mechanism and data mining10.1115/1.4065951 ↗
6. Limit state equation and failure pressure prediction model of pipeline with complex loading10.1038/s41467-024-48688-1 ↗
7. Residual strength prediction of corroded pipelines using multilayer perceptron and modified feedforward neural network10.1016/j.ress.2022.108980 ↗
8. (2023). Manual for Determining the Remaining Strength of Corroded Pipelines (Standard No. ASME B31G-2023).
9. Holloway, J., Madyira, D., and Asumani, O. (2022, January 25–27). Numerical Modelling of Crack-Like Defect Behaviour in Pipes Considering ASME B31G. Proceedings of the 2022 IEEE 13th International Conference on Mechanical and Intelligent Manufacturing Technologies (ICMIMT), Cape Town, South Africa.10.1109/ICMIMT55556.2022.9845340 ↗
10. Lo, M., Karuppanan, S., and Ovinis, M. (2021). Failure Pressure Prediction of a Corroded Pipeline with Longitudinally Interacting Corrosion Defects Subjected to Combined Loadings Using FEM and ANN. J. Mar. Sci. Eng., 9.10.3390/jmse9030281 ↗
11. Cuervo, B., and McQueen, M. (2021). A Novel and Practical Methodology for Gas Operators to Apply API Std 1163, In-Line Inspection (ILI) Systems Qualification Standard, NACE International.
12. Development of probabilistic failure pressure models for pipelines with single corrosion defect10.1016/j.ijpvp.2022.104656 ↗
13. Wang, Y., Su, C., and Xie, M. (2021). Optimal inspection and maintenance plans for corroded pipelines. 2021 Global Reliability and Prognostics and Health Management (PHM-Nanjing), IEEE.10.1109/PHM-Nanjing52125.2021.9612947 ↗
14. Kenedy, K., Sousa, P., Álamo, D., D’Aguiar, S.C.M., Sousa, P., and Silva, S. (2023, January 8–10). Optimal maintenance planning for corroded pipelines—A parametric study. Proceedings of the Rio Pipeline Conference and Exhibition, Rio de Janeiro, Brazil.
15. (2021). Fitness-For-Service (Standard No. API 579-1/ASME FFS-1:2021).
16. Basso, A., Filho, J., and Shang, H. (2015, January 6–11). Assessment Of DNV-RP-F101 Method in Estimating the Failure Pressure in Corroded Pipelines. Proceedings of the 23rd ABCM International Congress of Mechanical Engineering, Rio de Janeiro, Brazil.
17. Liu, W., Chen, Z., and Hu, Y. (2022, January 22). Failure Pressure Prediction of Defective Pipeline Using Finite Element Method and Machine Learning Models. SPE-Society of Petroleum Engineer. Proceedings of the SPE Annual Technical Conference and Exhibition 2022, Houston, TX, USA.10.2118/210406-MS ↗
18. Predictive modeling for gas transmission pipeline failure cause and consequence analysis10.1016/j.psep.2025.106812 ↗
19. A survey on anomaly detection for technical systems using LSTM networks10.1016/j.compind.2021.103498 ↗
20. Zhao, H., Liang, X., Yang, Z., He, P., and Zhao, B. (2024). Experimental and numerical analysis of the impact of corrosion on the failure pressure of API 5L X65 pipeline. J. Mar. Sci. Eng., 12.10.3390/jmse12101810 ↗
21. Finite Element Analysis of Failure Pressure of X100 Oil and Gas Pipeline with Double Defects
22. Axial loading mechanism analyses and evaluation methods of CCFT short columns with gap defects10.1016/j.istruc.2022.11.015 ↗
23. Estimation of defect size and cross-sectional profile for the oil and gas pipeline using visual deep transfer learning neural network
24. Dupuis, B.R. (1998, January 7–11). The Canadian energy pipeline association stress corrosion cracking database. Proceedings of the International Pipeline Conference, Calgary, AB, Canada.10.1115/IPC1998-2067 ↗
25. Failure pressure estimation error for corroded pipeline using various revisions of ASME B31G10.1016/j.engfailanal.2019.104284 ↗
26. Marchesani, F., Leporini, M., Torselletti, E., Orselli, B., Scarsciafratte, D., Mercuri, A., Aloigi, E., Di Biagio, M., and Fonzo, A. (2023, January 24–26). A Case Study for Repurposing Existing Sealines to CO2 Transport Offshore. Proceedings of the OMC Med Energy Conference and Exhibition, Ravenna, Italy.
27. Influence of the corrosion anomaly class on predictive accuracy of burst capacity models for corroded pipelines10.1007/s40891-020-00227-w ↗
28. Faster RSTRENG: A More Efficient Effective Area Method Algorithm for Corrosion Assessment10.1115/1.4056932 ↗
29. Correlating Quantitative Risk Assessment and Exergy Analysis for Accounting Inefficiency in Process Hazards: A Case Study10.1115/1.4039617 ↗
30. FFS master software for fitness-for-service assessment of hydrogen induced cracking equipment based on API 579-1/ASME FFS-110.3221/IGF-ESIS.60.14 ↗
31. Nunez, J., Hay, C., and Bedoya, J. (2023, January 16–21). Development of Code-Specific RSFa for Use in API 579-1/ASME FFS-1 Assessments. Proceedings of the Pressure Vessels and Piping Conference, Atlanta, GA, USA.10.1115/PVP2023-106460 ↗