Failure prediction of AZ31B magnesium alloy sheet based on a micro-mechanical void model incorporating the asymmetric plasticity constitutive law
Source abstract
Abstract
Abstract In this paper, a fracture criterion based on a micro-mechanics void model was applied to ductile fracture model of AZ31B magnesium alloy sheet. In particular, the fracture model was coupled with an advanced plasticity model in which the asymmetric cyclic response of magnesium alloy due to combined slip and twin deformation can be reproduced accurately. The extended McClintock fracture model adopted in this study as a fracture criterion for the magnesium alloy sheet takes into account the effect of shear deformation by adding Lode parameter dependency to the original model. Both the fracture model and the plasticity model were implemented in the explicit finite element code, LS-DYNA, via a user-defined material subroutine. The parameters of the proposed fracture model were identified using multi-directional mechanical tests, such as uniaxial tension, simple shear, and notched tension tests. As validation, the proposed model was compared with existing models for predicting the fracture patterns in test specimens and limit dome heights.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Forming of aluminum alloys at elevated temperatures – Part 2: numerical modeling and experimental verification10.1016/j.ijplas.2005.03.006 ↗
2. Ductile fracture by void growth to coalescence10.1016/S0065-2156(10)44003-X ↗
3. A new model of metal plasticity and fracture with pressure and Lode dependence10.1016/j.ijplas.2007.09.004 ↗
4. Modeling the material behavior of magnesium alloy AZ31 using different yield criteria10.1007/s00170-008-1900-z ↗
5. A microstructure based analytical model for tensile twinning in a rod textured Mg alloy10.1016/j.ijplas.2015.05.003 ↗
6. Rupture mechanisms in combined tension and shear–Experiments10.1016/j.ijsolstr.2006.09.031 ↗
7. Partially coupled anisotropic fracture model for aluminum sheets10.1016/j.engfracmech.2010.02.024 ↗
8. Coalescence–controlled anisotropic ductile fracture10.1115/1.2812369 ↗
9. Constitutive description for casting magnesium alloy involving void evolution10.1016/S1003-6326(10)60520-1 ↗
10. Continuous, large strain, tension/compression testing of sheet material10.1016/j.ijplas.2004.12.002 ↗
11. A new method for the prediction of formability in metal sheet, sheet metal forming and formability
12. On some modifications of kinematic hardening to improve the description of ratcheting effects10.1016/0749-6419(91)90050-9 ↗
13. Ductility and the workability of metals
14. A constitutive and fracture model for AZ31B magnesium alloy in the tensile state10.1016/j.msea.2013.11.008 ↗
15. International Standard · 2008
16. Effect of inhomogeneous deformation on anisotropy of AZ31 magnesium sheet10.1016/j.msea.2012.08.117 ↗
17. Microstructural aspects of damage and fracture in AZ31 sheet materials10.1007/s11665-012-0399-5 ↗
18. Failure prediction of magnesium alloy sheets deforming at warm temperatures using the Zener-Holloman parameter10.1016/j.mechmat.2009.12.003 ↗
19. Constitutive law for AZ31B Mg alloy sheets and finite element simulation for three-point bending10.1016/j.ijmecsci.2008.08.004 ↗
20. Temperature and strain rate effect incorporated failure criteria for sheet forming of magnesium alloys10.1016/j.msea.2007.11.077 ↗
21. Constitutive modeling for anisotropic/asymmetric hardening behavior of magnesium alloy sheets: application to sheet springback10.1016/j.ijplas.2007.12.003 ↗
22. Anisotropic hardening of sheet metals at elevated temperature: tension-compression test development and validation10.1007/s11340-012-9694-1 ↗
23. Cyclic behavior of AZ31B Mg: experiments and non-isothermal forming simulations10.1016/j.ijplas.2015.06.005 ↗
24. Livermore Software Technology Corporation (LSTC) · 2007
25. An extended GTN model for ductile fracture under high and low stress triaxiality10.1016/j.ijplas.2013.08.015 ↗
26. Ductile fracture by hole growth in shear bands10.1007/BF00184558 ↗
27. An elasto-plastic constitutive model for evolving asymmetric/anisotropic hardening behavior of AZ31B and ZEK100 magnesium alloy sheets considering monotonic and reverse loading paths10.1016/j.ijplas.2015.03.004 ↗
28. Plasticity theory of ductile fracture by void growth and coalescence10.1007/BF02561501 ↗
29. Three-dimensional void growth in plastic materials10.1016/0093-6413(92)90070-Q ↗
30. Prediction of void growth in tensile test10.1016/0093-6413(92)90053-D ↗
31. Ductile fracture prediction in rotational incremental forming for magnesium alloy sheets using combined kinematic/isotropic hardening model10.1007/s11661-010-0235-1 ↗
32. A continuous damage fracture model to predict formability of sheet metal10.1111/j.1460-2695.2012.01714.x ↗
33. A practical constitutive model for AZ31B Mg alloy sheets with unusual stress-strain response10.1016/j.finel.2013.08.008 ↗
34. Mechanical behavior of AZ31B Mg alloy sheets under monotonic and cyclic loadings at room and moderately elevated temperatures10.3390/ma7021271 ↗
35. Modeling twinning and detwinning behavior of Mg alloy ZK60A during monotonic and cyclic loading10.1016/j.ijplas.2014.08.010 ↗
36. On the ductile enlargement of voids in triaxial stress fields10.1016/0022-5096(69)90033-7 ↗
37. Combining porous plasticity with Coulomb and Portevin-Le Chatelier models for ductile fracture analyses10.1016/j.ijplas.2015.02.008 ↗
38. Failure of magnesium sheets under monotonic loading: 3D examination of fracture mode and mechanics
39. 2D and 3D visualization of ductile fracture10.1002/adem.200600034 ↗
40. Mechanical behavior of Mg subjected to strain path changes: experiments and modeling10.1016/j.ijplas.2014.10.009 ↗
41. Calibration and evaluation of seven fracture models10.1016/j.ijmecsci.2005.03.003 ↗
42. Wilkins · 1980
43. Constitutive modeling of void shearing effect in ductile fracture of porous materials10.1016/j.engfracmech.2007.07.022 ↗
44. Slip, twinning, and fracture in hexagonal close-packed metals
45. Prediction of ductile fracture induced by contraction twinning in AZ31 sheet subjected to uniaxial and biaxial stretching modes10.1016/j.ijplas.2016.05.004 ↗
46. Prediction of edge cracks and plastic-damage analysis of Mg alloy sheet in rolling10.1016/S1003-6326(11)60829-7 ↗