Effects of lattice orientation and crack tip constraint on ductile fracture initiation in Mg single crystals
Source abstract
Abstract
In this work, plane strain finite element simulations of cylindrical void growth ahead of a notch tip in Mg single crystals are conducted to understand the effects of lattice orientation and crack tip constraint on the ductile fracture processes. The constitutive response is represented through crystal plasticity theory accounting for both slip and twinning. Three specimens - shallow, deeply cracked single edge notch tension and deeply cracked four point bend specimens, which display increasing levels of elastic biaxiality ratio (or constraint) are considered. Also two lattice orientations, with c-axis along the thickness direction and normal to the flat surfaces of notch (referred to as A and B) are studied. It is found that void. growth and coalescence in orientation A (where predominantly prismatic slip occurs) take place directly ahead of the tip and fracture resistance enhances with reduction in constraint. By contrast, orientation B shows void coalescence by inclined shear bands, displays retarded void growth and higher J at crack initiation. The ductile fracture behavior is analyzed by examining slip, porosity and mean stress development in the voided cells ahead of the notch tip. (c) 2017 Elsevier ltd. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Metal Forming Simulation Techniques · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. Application of texture simulation to understanding mechanical behavior of Mg and solid solution alloys containing Li or Y10.1016/S1359-6454(01)00297-X ↗
2. Plastic anisotropy and the role of non-basal slip in magnesium alloy AZ31B10.1016/j.ijplas.2004.05.018 ↗
3. A theory for amorphous viscoplastic materials undergoing finite deformations, with application to metallic glasses10.1016/j.jmps.2004.12.006 ↗
4. Anderson · 2005
5. Relationship between deformation twinning and surface step formation in AZ31 magnesium alloys10.1016/j.actamat.2010.03.044 ↗
6. The role of deformation twinning in the fracture behavior and mechanism of basal textured magnesium alloys10.1016/j.msea.2014.02.010 ↗
7. Micromechanics of crystals and polycrystals10.1016/S0065-2156(08)70242-4 ↗
8. Twinning and the ductility of magnesium alloys: Part I: tension twins10.1016/j.msea.2006.12.037 ↗
9. Twinning and the ductility of magnesium alloys: Part II: contraction twins10.1016/j.msea.2007.02.109 ↗
10. Ductile fracture by void growth to coalescence10.1016/S0065-2156(10)44003-X ↗
11. On the strength of dislocation interactions and their effect on latent hardening in pure magnesium10.1016/j.ijplas.2014.06.010 ↗
12. Automotive applications of magnesium and its alloys
13. Budiansky · 1982
14. A cohesive finite element formulation for modelling fracture and delamination in solids10.1007/BF02703506 ↗
15. Eshelby · 1970
16. Enhanced toughness due to stable crack tip damage zones in bulk metallic glass10.1016/S1359-6462(99)00243-2 ↗
17. Research for a new age of magnesium in the automotive industry10.1016/S0924-0136(01)00780-4 ↗
18. Fundamentals of the phenomenological theory of nonlinear fracture mechanics10.1115/1.3167187 ↗
19. Effect of T-stress and loading rate on crack initiation in rate sensitive plastic materials10.1016/S0020-7683(02)00012-4 ↗
20. Effects of constraint on upper shelf fracture toughness
21. Incorporation of deformation twinning in crystal plasticity models10.1016/S0022-5096(97)00051-3 ↗
22. Kaushik · 2013
23. Experimental study of fracture behavior of magnesium single crystals10.1016/j.msea.2013.10.018 ↗
24. Finite element simulations of notch tip fields in magnesium single crystals10.1007/s10704-014-9971-3 ↗
25. Plane-strain compression of magnesium and magnesium alloy crystals
26. Void growth and coalescence in anisotropic plastic solids10.1016/j.ijsolstr.2011.02.020 ↗
27. Modeling damage accumulation to fracture in a magnesium-rare earth alloy10.1016/j.actamat.2016.10.074 ↗
28. Effect of stress triaxiality on the flow and fracture of Mg alloy AZ3110.1007/s11661-014-2211-7 ↗
29. Critical hardening rate model for predicting path-dependent ductile fracture10.1007/s10704-016-0130-x ↗
30. Formulation of implicit finite element methods for multiplicative finite deformation plasticity10.1002/nme.1620290304 ↗
31. Analysis of a dynamically loaded three-point-bend ductile fracture specimen10.1016/0013-7944(86)90129-3 ↗
32. Needleman · 1982
33. Effects of void band orientation and crystallographic anisotropy on void growth and coalescence10.1016/j.jmps.2016.06.003 ↗
34. Effects of void fraction on void growth and linkage in commercially pure magnesium10.1016/j.actamat.2016.04.008 ↗
35. Impact of microstructure on void growth and linkage in pure magnesium10.1007/s10704-016-0111-0 ↗
36. On the damage and fracture of commercially pure magnesium using x-ray microtomography10.1016/j.msea.2016.08.095 ↗
37. Family of crack-tip fields characterized by a triaxiality parameter-I. Structure of fields10.1016/0022-5096(91)90049-T ↗
38. An analysis of nonuniform and localized deformation in ductile single crystals10.1016/0001-6160(82)90005-0 ↗
39. Material rate dependence and localized deformation in crystalline solids10.1016/0001-6160(83)90014-7 ↗
40. Fracture behavior of magnesium alloys–Role of tensile twinning10.1016/j.actamat.2015.04.054 ↗
41. Numerical simulations of cylindrical void growth in Mg single crystals10.1007/s10704-015-0063-9 ↗
42. Prasad · 2017
43. Modeling the effect of twinning and detwinning during strain-path changes of magnesium alloy AZ3110.1016/j.ijplas.2008.05.005 ↗
44. The effect of microstructure on damage and fracture in AZ31B and ZEK100 magnesium alloys10.1016/j.msea.2016.01.103 ↗
45. The localization of plastic deformation
46. Three dimensional simulations of texture and triaxiality effects on the plasticity of magnesium alloys10.1016/j.actamat.2017.01.015 ↗
47. On plastic flow in notched hexagonal close packed single crystals10.1016/j.jmps.2016.04.023 ↗
48. Fracture toughness in a rolled AZ31 magnesium alloy10.1016/j.jallcom.2005.07.073 ↗
49. Fracture mechanism of a coarse-grained magnesium alloy during fracture toughness testing10.1080/09500830802537718 ↗
50. Mixed mode (I and II) crack tip fields in bulk metallic glasses10.1016/j.jmps.2009.07.006 ↗
51. The relation between crack growth resistance and fracture process parameters in elastic-plastic solids10.1016/0022-5096(92)90020-3 ↗
52. Two mechanisms of ductile fracture: void by void growth versus multiple void interaction10.1016/S0020-7683(02)00168-3 ↗
53. A crystal plasticity model for hexagonal close packed (HCP) crystals including twinning and de-twinning mechanisms10.1016/j.ijplas.2013.02.016 ↗
54. Mechanical behavior of Mg subjected to strain path changes: experiments and modeling10.1016/j.ijplas.2014.10.009 ↗
55. Wonsiewicz · 1966
56. A computational approach to ductile crack growth under large scale yielding conditions10.1016/0022-5096(94)00069-H ↗
57. Slip, twinning, and fracture in hexagonal close-packed metals10.1007/BF02648537 ↗
58. Phenomenological crystal plasticity modeling and detailed micromechanical investigations of pure magnesium10.1016/j.jmps.2012.01.005 ↗
59. Zienkiewicz · 1989 · vol. 2