Comparative Evaluation of PLA and PETG Drawer Slides and Conventional Metal Systems for Furniture
Source abstract
Abstract
The increasing demand for sustainable and lightweight furniture systems has driven interest in additively manufactured polymer components as alternatives to conventional metal hardware. However, their performance at the functional assembly level under standardized loading conditions remains insufficiently explored. This study evaluates the feasibility of replacing metal drawer slides with fused deposition modeling (FDM)-based polymer alternatives fabricated from polylactic acid (PLA) and polyethylene terephthalate glycol (PETG). Unlike previous studies focused on material-level characterization, this work investigates fully functional drawer slide assemblies integrated into medium-density fiberboard (MDF) systems, enabling component-level assessment under realistic conditions. Specimens were designed in SolidWorks and fabricated under controlled printing parameters. Commercial metal slides were used as benchmarks. Mechanical performance was tested according to BS EN standards, and deformation was measured at multiple points. Statistical analysis included ANOVA, Tukey HSD, and t-tests at a 95% confidence level. Results showed significant differences among materials (p < 0.05). Metal slides exhibited the highest stiffness and minimal deformation. PLA showed stable performance with minor surface degradation, while PETG demonstrated lower dimensional stability and premature failure due to higher compliance. Overall, PLA-based FDM components offer a cost-effective alternative for non-heavy-duty applications, whereas PETG requires further optimization. The study bridges additive manufacturing and real-world furniture component performance under standardized testing.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Innovations in Concrete and Construction Materials · Polymer Foaming and Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Istanbul University-Cerrahpaşa, Istanbul 34473, Türkiye
Forest Industry Engineering Department, Faculty of Forestry, Forest Industry Machinery and Management, Istanbul University-Cerrahpaşa, İstanbul 34473, Türkiye
References (49)
Show source-provided references
1. Mimoso, I., Brites-Pereira, M., Alcântara, L., Morgado, M.I., Morgado, G., Saavedra, I., Muñoz, F.J.M., Louceiro, J., and Costa, E. (2025). Exploring Smart Furniture: A Systematic Review of Integrated Technologies, Functionalities, and Applications. Sensors, 25.10.3390/s25226900 ↗
2. Key supply chain strategies for post-COVID-19 recovery: Evidence from an Indian smart furniture industry10.1108/IJOEM-12-2021-1926 ↗
3. Krzyżaniak, Ł., Kuşkun, T., Kasal, A., and Smardzewski, J. (2021). Analysis of the internal mounting forces and strength of newly designed fastener to joints wood and wood-based panels. Materials, 14.10.3390/ma14237119 ↗
4. Investigations the effects of fastener, glue, and composite material types on the strength of corner joints in case-type furniture construction10.1016/j.matdes.2009.04.038 ↗
5. Optimum dowel spacing for corner joints in 32-mm cabinet construction
6. Determination of the strength of L-type corner joints obtained from wood-based board materials using different joining techniques
7. Insights into consumer preferences and purchasing behaviour for wooden bed furniture in Slovakia10.1016/j.jretconser.2023.103613 ↗
8. Liu, Y., Hu, W., Kasal, A., and Erdil, Y.Z. (2023). The state of the art of biomechanics applied in ergonomic furniture design. Appl. Sci., 13.10.3390/app132212120 ↗
9. An evaluation on growth potential of the small and medium scale enterprises (SME) in Turkish furniture industry
10. Kłos, R., and Langová, N. (2023). Determination of reliability of selected case furniture constructions. Appl. Sci., 13.10.3390/app13074587 ↗
11. Strength and durability of furniture drawers and doors10.1016/j.matdes.2013.03.101 ↗
12. Analysis of strength, durability, stability, and fatigue parameters of furniture doors and drawers using engineering design method10.15376/biores.19.2.2967-2989 ↗
13. Kroon, E., and Nilsson, A. (2019). Development of Sliding Mechanism for IKEA Furniture. [Master’s Thesis, Lund University]. Available online: https://lup.lub.lu.se/student-papers/search/publication/8983351.
14. Sandwich printing of PLA and carbon fiber reinforced-PLA for enhancing tensile and impact strength of additive manufactured parts10.1016/j.jmapro.2025.02.001 ↗
15. Optimization of fused deposition modeling process parameters: A review of current research and future prospects10.1007/s40436-014-0097-7 ↗
16. Additive manufacturing in respiratory sciences—Current applications and future prospects10.1016/j.addr.2022.114341 ↗
17. Physical and mechanical properties of PLA, and their functions in widespread applications—A comprehensive review10.1016/j.addr.2016.06.012 ↗
18. Thermoforming of compostable PLA/PBS blends reinforced with highly hygroscopic calcium carbonate10.1016/j.jmapro.2020.06.008 ↗
19. Enhancing thermo-mechanical properties of additively manufactured PLA using eggshell microparticle fillers10.1016/j.jmapro.2024.11.095 ↗
20. From BIM model to 3D construction printing: A framework proposal10.1016/j.foar.2024.03.002 ↗
21. Manufacturing and LCA data collection for a biomaterial a/c interior demonstrator using the example of a drawer box10.1088/1742-6596/2526/1/012054 ↗
22. Improving fatigue of mechanical systems such as freezer drawer subject to repetitive stresses10.1016/j.engfailanal.2020.104404 ↗
23. Nicolau, A., Pop, M.A., and Coșereanu, C. (2022). 3D printing application in wood furniture components assembling. Materials, 15.10.3390/ma15082907 ↗
24. Le, T.H., Le, V.S., Dang, Q.K., Nguyen, M.T., Le, T.K., and Bui, N.T. (2021). Microstructure evaluation and thermal–mechanical properties of ABS matrix composite filament reinforced with multi-walled carbon nanotubes by a single screw extruder for FDM 3D printing. Appl. Sci., 11.10.3390/app11198798 ↗
25. Energy absorption of 3D-printed PETG and PETG/CF sandwich structures with cellular cores subjected to low-velocity impact: Experimental and numerical analysis10.1016/j.engstruct.2025.119653 ↗
26. Multi-walled carbon nanotube/acrylonitrile butadiene styrene nanocomposite filaments for fused deposition modelling type 3D printing
27. Bembenek, M., Kowalski, Ł., and Kosoń-Schab, A. (2022). Research on the influence of processing parameters on the specific tensile strength of FDM additive manufactured PET-G and PLA materials. Polymers, 14.10.3390/polym14122446 ↗
28. Aw, Y.Y., Yeoh, C.K., Idris, M.A., Teh, P.L., Hamzah, K.A., and Sazali, S.A. (2018). Effect of printing parameters on tensile, dynamic mechanical, and thermoelectric properties of FDM 3D printed CABS/ZnO composites. Materials, 11.10.3390/ma11040466 ↗
29. Optimization of inter-layer printing parameters for enhanced mechanical performance of PETG in fused deposition modeling (FDM)10.1016/j.rineng.2025.104564 ↗
30. The impact of defects on tensile properties of 3D printed parts manufactured by fused filament fabrication10.1016/j.mtcomm.2018.12.003 ↗
31. Hsueh, M.H., Lai, C.J., Wang, S.H., Zeng, Y.S., Hsieh, C.H., Pan, C.Y., and Huang, W.C. (2021). Effect of printing parameters on the thermal and mechanical properties of 3D-printed PLA and PETG using fused deposition modeling. Polymers, 13.10.3390/polym13111758 ↗
32. Frunzaverde, D., Cojocaru, V., Băcescu, N., Ciubotariu, C.R., Micloșina, C.O., Turiac, R.R., and Mărginean, G. (2023). The influence of the layer height and the filament color on the dimensional accuracy and the tensile strength of FDM-printed PLA specimens. Polymers, 15.10.3390/polym15102377 ↗
33. The effects of PLA color on material properties of 3-D printed components
34. Gao, G., Xu, F., Xu, J., and Liu, Z. (2022). Study of material color influences on mechanical characteristics of fused deposition modeling parts. Materials, 15.10.3390/ma15197039 ↗
35. Nicolau, A., Pop, M.A., Georgescu, S.V., and Coșereanu, C. (2023). Application of additive manufacturing technology for chair parts connections. Appl. Sci., 13.10.3390/app132112044 ↗
36. Nicolau, A., Baba, M.N., Cerbu, C., Cioacă, C., Brenci, L.-M., and Coșereanu, C. (2025). Evaluation of 3D-printed connectors in chair construction: A comparative study with traditional mortise-and-tenon joints. Materials, 18.10.3390/ma18010201 ↗
37. Petrova, B., and Jivkov, V. (2024). Application of 3D printing technology in furniture construction. Materials, 17.10.3390/ma17194848 ↗
38. Branowski, B., Zabłocki, M., and Sydor, M. (2019). The Material Indices Method in the Sustainable Engineering Design Process: A Review. Sustainability, 11.10.3390/su11195465 ↗
39. Zhu, L., Yan, Y., and Lv, J. (2023). A Bibliometric Analysis of Current Knowledge Structure and Research Progress Related to Sustainable Furniture Design Systems. Sustainability, 15.10.3390/su15118622 ↗
40. Mechanical properties of recycled PLA and PETG printed by FDM/FFM method
41. (2012). Domestic and Kitchen Storage Furniture—Test Methods for the Determination of Strength, Durability and Stability (Standard No. BS EN 16122).
42. (2012). Furniture Fittings—Strength and Durability of Extension Elements and Their Components—Part 7: Performance Requirements (Standard No. BS EN 4875-7:2006).
43. Design and structural analysis of 3D-printed modular furniture joints10.1088/1757-899X/932/1/012101 ↗
44. PETG: Applications in modern medicine
45. Surface roughness of as-printed polymers: A comprehensive review10.1007/s00170-023-11566-z ↗
46. Muratović, E., Muminović, A.J., Gierz, Ł., Smailov, I., Sydor, M., Dizdarević, E., Pervan, N., and Delić, M. (2026). Surface Topography and Tolerance Quality Evaluation of Polymer Gears Using Non-Contact 3D Scanning Method. Materials, 19.10.3390/ma19071324 ↗
47. Mechanical properties of PLA, PETG, and ABS samples printed on a high-speed 3D printer
48. Martins, R.F., Branco, R., Martins, M., Macek, W., Marciniak, Z., Silva, R., Trindade, D., Moura, C., Franco, M., and Malça, C. (2024). Mechanical properties of additively manufactured polymeric materials—PLA and PETG—For biomechanical applications. Polymers, 16.10.3390/polym16131868 ↗
49. Algarni, M., and Ghazali, S. (2021). Comparative study of the sensitivity of PLA, ABS, PEEK, and PETG’s mechanical properties to FDM printing process parameters. Crystals, 11.10.3390/cryst11080995 ↗