Mechanical and Hygrothermal Evaluation of Eco-Friendly Cement Mortar Incorporating Upcycled Low-Density Polyethylene
Source abstract
Abstract
This study examined the mechanical and hygrothermal response of cement mortars incorporating recycled low-density polyethylene (LDPE) as a partial replacement of fine aggregate at levels of 2.5%, 5.0%, and 7.5% by weight of sand. A reference mixture without polymer was also prepared. The experimental program included determining density, workability, and compressive strength at 7 and 28 days. Based on the mechanical results, the formulation containing 2.5% LDPE was selected for further hygrothermal assessment in 1:5 scale chambers coated with conventional and modified mortars. LDPE incorporation progressively decreased density and generally reduced compressive strength relative to the control mixture, although a non-monotonic 28-day response was observed between the 2.5% and 5.0% LDPE mixtures. At 28 days, the reference mortar reached 5.243 MPa, whereas the mixture with 2.5% LDPE attained 1.461 MPa. Hygrothermal monitoring showed no substantial improvement in indoor temperature regulation; however, the LDPE-modified coating maintained higher indoor relative humidity than the conventional system during the test period. These results indicate that recycled LDPE can be incorporated into cement-based mortars at low replacement levels for exploratory non-structural applications. However, the resulting decrease in mechanical strength restricts its wider applicability and highlights the necessity for further verification to satisfy performance standards tailored to specific applications.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Hygrothermal properties of building materials · Natural Fiber Reinforced Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Academic Area of Engineering and Architecture, Autonomous University of the State of Hidalgo, Mineral de la Reforma 42184, Hidalgo, Mexico
References (43)
Show source-provided references
1. An Evaluation of Environmental Impacts of Construction Projects10.4067/S0718-50732014000300002 ↗
2. Innovations in Energy-Efficient Construction: Pioneering Sustainable Building Practices10.1016/j.clet.2025.100957 ↗
3. Lerna, M., Foti, D., Petrella, A., Sabbà, M.F., and Mansour, S. (2023). Effect of the Chemical and Mechanical Recycling of PET on the Thermal and Mechanical Response of Mortars and Premixed Screeds. Materials, 16.10.3390/ma16083155 ↗
4. Emerging Trends in Sustainable Building Materials: Technological Innovations, Enhanced Performance, and Future Directions10.1016/j.rineng.2024.103521 ↗
5. Smart Materials and Technologies for Sustainable Concrete Construction10.1016/j.dibe.2023.100177 ↗
6. Study on Implementation of Construction Waste Management in Minimizing Construction Material Waste
7. An Overview of Circular Economy Management Approach for Sustainable Construction and Demolish Waste Management
8. Navigating Environmental Stewardship: A Review of Construction Industry Practices in Developed Countries10.53623/csue.v4i1.440 ↗
9. Abduallah, R., Burris, L., Castro, J., and Sezen, H. (2025). Utilization of Different Types of Plastics in Concrete Mixtures. Constr. Mater., 5.10.3390/constrmater5020039 ↗
10. Unleashing High-Volume Waste Plastic Recycling in Sustainable Cement Mortar with Synergistic Matrix Enabled by in-Situ Polymerization10.1016/j.conbuildmat.2024.138031 ↗
11. Utilization of Plastic Waste as Replacement of Natural Aggregates in Sustainable Concrete: Effects on Mechanical and Durability Properties10.1007/s13762-023-04946-1 ↗
12. Use of Recycled Plastic as Fine Aggregate in Cementitious Composites: A Review10.1016/j.conbuildmat.2020.119146 ↗
13. Effect of Waste Plastic Fibers on the Printability and Mechanical Properties of 3D-Printed Cement Mortar10.1016/j.jobe.2024.108439 ↗
14. Mortar and Concrete Composites with Recycled Plastic: A Review
15. Sustainable Development of Concrete through Treated and Untreated Plastic Waste Aggregates10.1038/s41598-024-73236-8 ↗
16. Use of Recycled Plastics in Concrete: A Critical Review10.1016/j.wasman.2016.03.005 ↗
17. Strength and Durability of Mortar Made with Plastics Bag Waste (MPBW)10.1007/s40069-012-0013-0 ↗
18. Alrshoudi, F., Abdus Samad, U., and Alothman, O.Y. (2022). Evaluation of the Effect of Recycled Polypropylene as Fine Aggregate Replacement on the Strength Performance and Chloride Penetration of Mortars. Polymers, 14.10.3390/polym14142806 ↗
19. Soares, I., Nobre, F.X., Vasconcelos, R., and Ramírez, M.A. (2022). Study of Metakaolinite Geopolymeric Mortar with Plastic Waste Replacing the Sand: Effects on the Mechanical Properties, Microstructure, and Efflorescence. Materials, 15.10.3390/ma15238626 ↗
20. El Bitouri, Y., and Perrin, D. (2022). Compressive and Flexural Strengths of Mortars Containing ABS and WEEE Based Plastic Aggregates. Polymers, 14.10.3390/polym14183914 ↗
21. OECD Publishing (2022). Global Plastics Outlook: Economic Drivers, Environmental Impacts and Policy Options, OECD Publishing.
22. (2025, May 09). Statista Research Departament Annual Production of Plastics Worldwide from 1950 to 2022. Available online: https://www.statista.com/statistics/282732/global-production-of-plastics-since-1950/.
23. Plastics Europe AISBL (2024). The Circular Economy for Plastics a European Analysis, Plastics Europe AISBL.
24. UNEP (2023). Turning off the Tap How the World Can End Plastic Pollution and Create a Circular Economy United Nations Environment Programme, United Nations Environment Programme.
25. Multiscale Investigation of the Impact of Recycled Plastic Aggregate as a Fine Aggregate Replacement on One-Part Alkali-Activated Mortar Performance10.1016/j.jobe.2024.108768 ↗
26. Macheca, A.D., Mutuma, B., Adalima, J.L., Midheme, E., Lúcas, L.H.M., Ochanda, V.K., and Mhlanga, S.D. (2024). Perspectives on Plastic Waste Management: Challenges and Possible Solutions to Ensure Its Sustainable Use. Recycling, 9.10.3390/recycling9050077 ↗
27. Barra, R., and Leonard, S.A. (2018). Scientific and Technical Advisory Panel to the Global Environment Facility, United Nations Environment Programme.
28. da Silva, T.R., de Azevedo, A.R.G., Cecchin, D., Marvila, M.T., Amran, M., Fediuk, R., Vatin, N., Karelina, M., Klyuev, S., and Szelag, M. (2021). Application of Plastic Wastes in Construction Materials: A Review Using the Concept of Life-Cycle Assessment in the Context of Recent Research for Future Perspectives. Materials, 14.10.3390/ma14133549 ↗
29. A Critical Review of the Current Progress of Plastic Waste Recycling Technology in Structural Materials10.1016/j.cogsc.2023.100763 ↗
30. Polyethylene Terephthalate Aggregates in Structural Lightweight Concrete: A Meta-Analysis and Review10.1007/s43939-023-00060-8 ↗
31. Wu, J., Ye, X., and Cui, H. (2025). Recycled Materials in Construction: Trends, Status, and Future of Research. Sustainability, 17.10.3390/su17062636 ↗
32. Xanthopoulou, E., Chrysafi, I., Polychronidis, P., Zamboulis, A., and Bikiaris, D.N. (2023). Evaluation of Eco-Friendly Hemp-Fiber-Reinforced Recycled HDPE Composites. J. Compos. Sci., 7.10.3390/jcs7040138 ↗
33. Gámez-García, D.C., Vargas-Leal, A.J., Serrania-Guerra, D.A., González-Borrego, J.G., and Saldaña-Márquez, H. (2025). Sustainable Concrete with Recycled Aggregate from Plastic Waste: Physical–Mechanical Behavior. Appl. Sci., 15.10.3390/app15073468 ↗
34. Utilisation of Plastic Waste as Aggregate in Construction Materials: A Review10.1016/j.conbuildmat.2021.123669 ↗
35. Sustainable Construction: Performance Analysis of Concrete Incorporating e-Waste Plastic Aggregates and Silica Fume10.1016/j.conbuildmat.2025.141103 ↗
36. Influence of Partial Fine Aggregate Replacement with HDPE Plastic Waste on Concrete Compressive Strength: Melt Processing vs. Water Quenching10.14716/ijtech.v17i1.8200 ↗
37. Surface Treatment for Recycled Plastic Aggregate in Concrete a Review
38. Recycling of PET Bottles as Fine Aggregate in Concrete10.1016/j.wasman.2010.01.030 ↗
39. Experimental and Machine Learning-Based Investigation of Mechanical Properties of Basalt Fiber Composite Mortars Containing Plastic Waste and Recycled Concrete Aggregate
40. Innovative Use of Recycled Polyvinyl Chloride Waste in Plaster Mortar for Eco-Friendly Construction: Physico-Mechanical, Thermal, Acoustic and Hydric Performance10.1007/s41062-026-02669-z ↗
41. Mechanical Properties and Abrasion Behaviour of Concrete Containing Shredded PET Bottle Waste as a Partial Substitution of Natural Aggregate10.1016/j.conbuildmat.2013.11.049 ↗
42. Use of Recycled Plastic in Concrete: A Review10.1016/j.wasman.2007.09.011 ↗
43. Smarzewski, P., Małek, M., and Kluczyński, J. (2026). Recycled Polymer Shot as Sustainable Additive for Concrete: Mechanical, Thermal, and Environmental Assessment. PLoS ONE, 21.10.1371/journal.pone.0342266 ↗