Underground Seasonal Thermal Energy Storage in Post-Mining Roadways for Synergistic Mineral–Geothermal Exploitation

The synergistic utilization of post-mining spaces and geothermal energy through underground seasonal thermal energy storage (USTES) provides a promising pathway for sustainable heating and the low-carbon redevelopment of mining regions. To advance the thermal management and reveal the thermo-hydraulic evolution patterns within these repurposed environments, this study proposes an integrated approach that utilizes post-mining roadways as heat storage reservoirs, within the scope of a single idealized case study. A comprehensive USTES heating system model was established to systematically evaluate operational characteristics and environmental impacts under diverse conditions assuming homogeneous rock properties and idealized thermal boundaries. Results demonstrate that the surrounding ground temperature and the low thermal conductivity of the rock mass contribute to limiting heat dissipation and maintaining stable seasonal storage performance. For a roadway with a 20,000 m3 water storage capacity and an optimal 3900 m2 solar collector area, the system successfully satisfies the thermal demand of 30,000 m2 of building area. The configuration achieves 1239 MWh of cumulative heat storage over a 245-day cycle, maintaining a direct heating-to-heat-pump-upgraded heating ratio of 1.02. Furthermore, the implementation of variable-frequency thermal management strategies demonstrates remarkable economic and environmental superiority, yielding a 35.8% cost reduction compared to coal-fired heating, an overall energy saving rate of 77.5% relative to electric heating systems and a 13.5% decrease in CO2 emissions relative to gas-fired systems. This research provides fundamental design parameters for the synergistic exploitation of mineral and geothermal resources, advancing the development of green heating and the sustainable utilization of post-mining spaces.