Efficient 3D DC-Resistivity Forward Modeling in the Mixed Space-Wavenumber Domain Using a 1D Finite-Difference Method
Source abstract
Abstract
To address the computational complexity and cumbersome matrix assembly inherent in the Space-Wavenumber Mixed-Domain Method based on the Finite-Element Method (SWMDM-FEM) for three-dimensional (3D) Direct Current (DC) resistivity simulations, we propose an enhanced numerical approach. This approach utilizes two-dimensional (2D) Fourier transform technology to convert the 3D resistivity problem into a one-dimensional (1D) problem within the space-wavenumber mixed domain, which is then solved using the finite-difference method (FDM). By integrating the efficiency of Fourier transform with the simplicity of FDM, this method significantly enhances the efficiency of 3D numerical simulations in DC-resistivity methods. The accuracy of our algorithm is first validated using a spherical anomalous model, followed by testing with a model combining a low-resistivity cuboid and a high-resistivity sphere, demonstrating the method’s superior computational efficiency over the SWMDM-FEM. Subsequently, the proposed algorithm in this paper was tested using a cubic anomaly model. The number of iterations of the algorithm required to achieve the preset convergence accuracy was focused on and counted under different resistivity differences between the anomalous body and the background medium, different total grid numbers in the computational region, and different burial depths of the anomalous body so as to verify that the proposed algorithm has good convergence performance. At the same time, the test results show that under the premise of meeting the preset accuracy requirements, the number of iterations when the algorithm converges is only related to the resistivity difference between the anomalous body and the background medium, and has no correlation with the total number of grid divisions and the burial depth of the anomalous body. Finally, the E-SCAN method was used to carry out three-dimensional observation on the composite model, and the electromagnetic response characteristics of the anomalies were systematically analyzed. It is found that the position of the power supply point significantly impacts the observational outcomes. The E-SCAN method shows higher resolution in terms of identifying low-resistivity bodies but has limited capability in recognizing high-resistivity bodies. These findings provide a strategic workflow for practical geophysical exploration: rapid anomaly delineation using the E-SCAN method followed by high-precision 3D inversion.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Geophysical and Geoelectrical Methods · Electromagnetic Simulation and Numerical Methods · Electromagnetic Scattering and Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Computer Science and Engineering, Guilin University of Aerospace Technology, Guilin 541004, China
Center for Applied Mathematics of Guangxi, Yulin Normal University, Yulin 537000, China
College of Agriculture, Guangxi University, Nanning 530001, China
School of Computer Science and Engineering, Hunan University of Science and Technology, Xiangtan 411201, China
Funding
Guangxi Natural Science Foundation
References (66)
Show source-provided references
1. Binley, A. (2015). DC electrical methods. Treatise on Geophysics, Elsevier.10.1016/B978-0-444-53802-4.00192-5 ↗
2. Resistivity modeling for arbitrarily shaped three-dimensional structures10.1190/1.1440975 ↗
3. A 3-D finite-difference algorithm for DC resistivity modelling using conjugate gradient methods10.1111/j.1365-246X.1995.tb06897.x ↗
4. 3-D resistivity forward modeling and inversion using conjugate gradients10.1190/1.1443868 ↗
5. Some refinements on the finite-difference method for 3-D dc resistivity modeling10.1190/1.1444053 ↗
6. The calculation of three-dimensional geoelectric field of point source by incomplete cholesky conjugate gradient method
7. Computations of secondary potential for 3D DC resistivity modelling using an incomplete Choleski conjugate-gradient method10.1046/j.1365-2478.2003.00392.x ↗
8. Spitzer, K., and Wurmstich, B. (1999). Speed and Accuracy in 3-D Resistivity Modeling, Society of Exploration Geophysicists.10.1190/1.9781560802154.ch11 ↗
9. Three-dimensional finite-difference resistivity modeling using an upgridding method10.1109/36.851954 ↗
10. 3D numerical modeling of resistivity with surface topography by the finite-difference method
11. Three-dimensional forward modeling of DC resistivity using the aggregation-based algebraic multigrid method10.1007/s11770-017-0605-1 ↗
12. 3-D DC resistivity forward modeling using the multi-resolution grid10.1007/s00024-019-02365-3 ↗
13. Forward modeling of direct-current resistivity data on unstructured grids using an adaptive mimetic finite-difference method10.1190/geo2022-0438.1 ↗
14. IP and resistivity type curves for three-dimensional bodies10.1190/1.1440035 ↗
15. The surface integral approach to the solution of the 3D resistivity problem10.1071/EG972433 ↗
16. An Integral Equation and its Solution for some Two-and Three-Dimensional Problems in Resistivity and Induced Polarization10.1111/j.1365-246X.1975.tb05851.x ↗
17. Three-Dimensional Resistivity and Induced-Polarization Modeling Using Buried Electrodes10.1190/1.1440761 ↗
18. A method for calculating mise-à-la-masse anomalies in the case of high conductivity contrast by the integral equation technique10.1016/0016-7142(84)90030-9 ↗
19. Potential field of a stationary electric current using fredholm’s integral equations of the second kind10.1111/j.1365-2478.1986.tb00498.x ↗
20. Aspects of charge accumulation IN d.c. resistivity experiments10.1111/j.1365-2478.1991.tb00345.x ↗
21. Fast resistivity/IP inversion using a low-contrast approximation10.1190/1.1443937 ↗
22. The modelling of direct current electric potential in an arbitrarily anisotropic half-space containing a conductive 3-D body10.1016/S0926-9851(97)00012-8 ↗
23. An integral equations solution of the forward D.C. geoelectric problem for a 3-D body of inhomogeneous conductivity buried in a half space10.1016/S0926-9851(98)00007-X ↗
24. Forward modelling of direct current and low-frequency electromagnetic fields using integral equations
25. The boundary element method for 3-D dc resistivity modeling in layered earth10.1190/1.1468622 ↗
26. An integral equation method for the inverse conductivity problem10.1016/j.physleta.2004.03.060 ↗
27. 3D modelling and sensitivity in DC resistivity using charge density10.1111/j.1365-2478.2005.00484.x ↗
28. Chen, Q., Chen, L., and Zhang, Q. (2016, January 8–11). A rapid and accurate algorithm for numerical simulation of direct current fields with arbitrary conductivity distribution. Proceedings of the Progress in Electromagnetic Research Symposium, Shanghai, China.
29. Accurate volume integral solutions of direct current resistivity potentials for inhomogeneous conductivities in half space10.1016/j.jappgeo.2018.02.005 ↗
30. The application of an integral-equation-based automatic inversion algorithm for interpretation of vertical electrical sounding data
31. Finite element three-dimensional direct current resistivity modelling: Accuracy and efficiency considerations10.1046/j.0956-540x.2001.01412.x ↗
32. Three-dimensional DC resistivity forward modelling using finite elements in comparison with finite-difference solutions10.1046/j.1365-246X.2002.01819.x ↗
33. Finite element resistivity modelling for three-dimensional structures with arbitrary anisotropy10.1016/j.pepi.2004.08.014 ↗
34. A 3-D finite-element algorithm for DC resistivity modelling using the shifted incomplete Cholesky conjugate gradient method10.1046/j.1365-246X.2003.02018.x ↗
35. 3D numerical simulation study of DC resistivity anomaly under complicated terrain
36. Three-dimensional modelling and inversion of DC resistivity data incorporating topography I: Modelling10.1111/j.1365-246X.2006.03010.x ↗
37. The resistivity FEM numerical modeling on 3-D undulating topography
38. 2.5-D/3-D resistivity modelling in anisotropic media using Gaussian quadrature grids10.1111/j.1365-246X.2008.03950.x ↗
39. 3D DC resistivity forward modeling by finite-infinite element coupling method
40. 3D direct current resistivity modeling with unstructured mesh by adaptive finite-element method10.1190/1.3298690 ↗
41. A goal-oriented adaptive finite-element approach for multi-electrode resistivity system10.1093/gji/ggu245 ↗
42. 2.5-D and 3-D DC resistivity modelling using an extrapolation cascadic multigrid method10.1093/gji/ggu094 ↗
43. Rücker, C. (2011). Advanced Electrical Resistivity Modelling and Inversion Using Unstructured Discretization. [Doctoral Thesis, University of Leipzig].
44. Three-dimensional resistivity tomography in extreme coastal terrain amidst dense cultural signals: Application to cliff stability assessment at the historic D-Day site10.1111/j.1365-246X.2010.04915.x ↗
45. An approximate boundary condition of FEM-based 3D numerical simulation with multi-source direct current resistivity method
46. Characteristics of 3D DC resistivity response for arbitrary anisotropic models using circular scanning measurement
47. 3D modeling of direct-current anisotropic resistivity using the adaptive finite-element method based on continuity of current density
48. Three-dimensional direct current resistivity forward modeling based on the hp-adaptive finite element method10.1016/j.cageo.2020.104566 ↗
49. 3-D forward modelling for DC resistivity method based on smooth multiscale finite-element algorithm10.1093/gji/ggad141 ↗
50. Spectral-element method based on domain decomposition for 3D DC resistivity modeling10.1190/geo2024-0180.1 ↗
51. Fast Forward Modeling of Resistivity Method under Complex Topography Using Finite Element Method10.1007/s11770-024-1054-2 ↗
52. Ling, J.X. (2022). Study on Response Characteristics of DC Resistivity Method Based on Differential Excitation. [Doctoral Dissertation, Central South University].
53. Numerical modeling of 3D DC resistivity method in the mixed space-wavenumber domain10.1007/s11770-021-0904-4 ↗
54. Three-Dimensional DC Anisotropic Resistivity Modeling Using a Method in the Mixed Space–Wavenumber Domain10.1007/s00024-022-03043-7 ↗
55. Analysis of response characteristics of IP differential device based on 3D numerical simulation
56. 3-D resistivity modeling of undulating terrain using space-wavenumber mixed domain approach10.1088/1402-4896/adb357 ↗
57. The Modeling of 3-D DC Resistivity Based on Integral Equation of Potential10.1109/TGRS.2024.3397811 ↗
58. Research on 3D modelling of induced polarization in polarizability anisotropic media10.1111/1365-2478.13580 ↗
59. Xu, S.Z. (1994). The Finite Element Method in Geophysics, Science Press. (In Chinese).
60. Computation of discrete frequency when using FFT algorithm with random sampling points sampling points
61. Jepsen, A.F. (1969). Numerical Modelling in Resistivity Prospecting, University of California, Department of Materials Science and Engineering, Engineering Geoscience.
62. Algorithms for special tridiagonal systems10.1137/0912023 ↗
63. Shift sampling theory of Fourier transform computation10.1007/BF02916587 ↗
64. High-precision Fourier forward modeling of potential fields10.1190/geo2014-0039.1 ↗
65. Interpretation of resistivity data over filled sinks10.1190/1.1438048 ↗
66. Approximate inverse mappings in DC resistivity problems10.1111/j.1365-246X.1992.tb00101.x ↗