The Influence of Finned Tube Parameters on Heat Transfer in Shell and Tube Heat Exchangers
Source abstract
Abstract
Nine sets of fin parameter combinations, including a plain tube control group, were modeled. Simulations were performed under steady-state conditions using the EWT Realizable k-ε turbulence model, with benzene and water as working fluids, while accounting for temperature-dependent thermophysical properties. Flow field distribution, temperature profile, Nusselt number, and pressure drop in the shell side of the heat exchanger were analyzed. Response surface methodology was employed to systematically evaluate the coupled effects of fin height and fin spacing on thermal performance. The results indicate that annular fins significantly enhance heat transfer by inducing secondary flow and disrupting the thermal boundary layer. Compared to the smooth tube, the finned tubes increased the Nusselt number (Nu) by up to 28.6% and the total heat transfer rate by 13.55%, while the pressure drop (ΔP) increased by approximately 9.81% to 16.5%. The analysis revealed that fin height is the dominant factor affecting performance, whereas fin spacing plays a regulatory role. As the fins became taller or denser, the temperature field evolved from stable stratification to intense mixing and eventually to local disorder. The study identified an optimal parameter range for engineering applications. A fin height of 2–3 mm combined with a spacing of 10–15 mm achieves the best balance between heat transfer enhancement and flow resistance. Specifically, the combination of h = 3 mm and s = 10 mm yielded the highest Energy Efficiency Coefficient (EEC) of 1.567. This configuration is recommended for large-flow, pressure-drop-sensitive systems, such as those found in petrochemical plants or long-distance heat transmission applications.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Heat Transfer and Optimization · Nanofluid Flow and Heat Transfer · Plasma and Flow Control in Aerodynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
College of Engineering Science Technology, Shanghai Ocean University, Shanghai 201306, China
Pulin Zhike (Shanghai) Technology Co., Ltd., Shanghai 201306, China
Funding
National Natural Science Foundation of China · National Key Research and Development Program · Shanghai Natural Science Foundation
References (29)
Show source-provided references
1. Enhancement of Heat Transfer in Shell and Tube Heat Exchanger Using Mini-Channels and Nanofluids: An Experimental Study10.1016/j.ijthermalsci.2022.107664 ↗
2. Review of Heat Transfer Enhancement on Helical Coil Heat Exchanger by Additive Passive Method10.1016/j.matpr.2020.08.725 ↗
3. Analyze The Effects of Helical Baffles Angles Variation on Shell Side Heat Transfer Coefficient and Pressure Drop of Shell and Tube Heat Exchange10.35718/specta.v2i1.94 ↗
4. Problems Involved in the Shell-Side Performance of a Longitudinal-Flow Shell-and-Tube Heat Exchanger with Decrease in L/D and Its Solutions10.1093/ijlct/cts042 ↗
5. The Influence of Branched Annular Fins on the Performance of Phase Change Heat Exchangers10.1016/j.ijheatfluidflow.2024.109714 ↗
6. A Numerical Study on the Air-Side Heat Transfer of Perforated Finned-Tube Heat Exchangers with Large Fin Pitches10.1016/j.ijheatmasstransfer.2016.04.081 ↗
7. Performance Optimization of Y-Shaped Helical Baffle Heat Exchangers Using Response Surface Methodology10.1016/j.applthermaleng.2025.127002 ↗
8. Flow Pattern and Vortex Mechanisms on Heat Transfer Performance in Shell-and-Tube Heat Exchangers10.1016/j.icheatmasstransfer.2025.109249 ↗
9. Parametric Study and Application of a Data-Mining Model in 2D and 3D Micro-Fin Tubes10.1016/j.applthermaleng.2022.118165 ↗
10. Natural Convection Heat Transfer over Horizontal Annular Elliptical Finned Tubes10.1016/j.icheatmasstransfer.2020.104823 ↗
11. Double-Pass Shell-and-Tube Heat Exchanger Performance Enhancement with New Combined Baffle and Elliptical Tube Bundle Arrangement10.1016/j.ijthermalsci.2021.106999 ↗
12. Lu, M., Feng, Z., Wang, Y., Yang, H., Xia, W., Zhu, H., and Hua, D. (2022). Flow Characteristics and Structure Optimization of a Baffle Plate Heat Exchanger. Front. Energy Res., 9.10.3389/fenrg.2021.830056 ↗
13. Barzegarian, R., Yousefi, T., and Aloueyan, A. (2026, May 08). A Comparative Numerical Study on Heat Transfer Characteristics of a Shell and Tube Heat Exchanger with Segmental and Helical Baffles. Available online: https://www.avestia.com/FFHMT2017_Proceedings/files/list_of_papers.html.10.11159/ffhmt17.142 ↗
14. Beziel, M., and Stephan, K. (2014). Temperature Distribution at the Outlet of Tube Bundle Heat Exchangers. Transport Phenomena in Thermal Engineering, Begell House.
15. Comparison of Performance of Shell-and-Tube Heat Exchangers with Plain and Annular-Finned Tube Bundle10.1063/1.5018537 ↗
16. Plate Heat Exchangers for Ocean Thermal Energy Conversion
17. Simulation of UV Photoreactor for Water Disinfection in Eulerian Framework10.1016/j.ces.2006.03.010 ↗
18. A Comprehensive Investigation of Shell and Tube Heat Exchangers Based on Porous Baffle Design and Multi-Objective Parameter Optimization10.1016/j.ijthermalsci.2025.110463 ↗
19. Numerical Simulation of Flow and Heat Transfer Performance of Tube-Shell Coupled Helically Coiled Corrugated Tube Heat Exchanger10.1016/j.icheatmasstransfer.2024.107325 ↗
20. Improving the Computational Accuracy of the Dynamic Electro-Geometrical Model Using Numerical Solutions10.1038/s41598-022-09674-z ↗
21. Stroia, I., Itu, L., Niţă, C., Lazăr, L., and Suciu, C. (2015, January 15–17). GPU Accelerated Geometric Multigrid Method: Comparison with Preconditioned Conjugate Gradient. Proceedings of the 2015 IEEE High Performance Extreme Computing Conference (HPEC), Waltham, MA, USA.10.1109/HPEC.2015.7322480 ↗
22. Mesh Convergence Analysis on the Aerodynamic Performance of A Sedan Vehicle10.33093/jetap.2025.7.1.14 ↗
23. Zhou, J. (2025). Structural Design and Numerical Simulation of Shell-and-Tube Heat Exchangers. [Master’s Thesis, Southwest Petroleum University].
24. Numerical Investigation of Heat Transfer and Pressure Drop Characteristics in the Micro-Fin Helically Coiled Tubes10.1016/j.applthermaleng.2020.116093 ↗
25. Selecting Superior Fin Geometry among Four Suggested Geometries for Shell and Helically Coiled Finned Tube Heat Exchangers with Numerical Simulation and Experimental Validation10.1016/j.rineng.2022.100867 ↗
26. Enhancing Thermal Performance of Shell and Tube Heat Exchangers Using ZnO/Water Nanofluids: A CFD-Based Laminar Flow Study10.1016/j.ces.2025.122532 ↗
27. Numerical Evaluation of Thermohydraulic Parameters for Diverse Configurations of Shell-and-Tube Heat Exchanger10.1016/j.rineng.2024.102509 ↗
28. Integrated Optimization and Advanced Thermal Assesment of Nanofluid-Assisted and Dimple-Enhanced Shell-and-Tube Heat Exchangers10.1016/j.tsep.2025.104429 ↗
29. A Second Law Analysis on Flow of a PCM Based Nanofluid in a Shell-and-Tube Heat Exchanger: An Experimental Study for Sustainable Energy10.1016/j.rineng.2024.102648 ↗