Tribotechnical Diagnostics of Aircraft Emergency Hydrogenerator NP-27 T
Source abstract
Abstract
Aircraft emergency hydraulic pumps are safety-critical units whose intermittent operation complicates condition assessment and reduces the diagnostic value of conventional bulk physicochemical oil properties. This study evaluates the applicability of tribotechnical oil analysis for monitoring degradation of the NP-27T emergency hydraulic pump under controlled bench conditions. Four NP-27T units were tested on a dedicated hydraulic bench, and oil samples were collected at defined intervals during operation and after test completion. The diagnostic methodology combined elemental spectrometry (ICP-OES), particle counting interpreted with reference to ISO 4406, and analytical ferrography. The results showed that flow performance deterioration was accompanied by measurable changes in oil-borne wear indicators, although the sensitivity of the individual diagnostic channels varied among the tested units. In several cases, the coarse particle fraction (>15 μm) exhibited the clearest response to degradation, while Fe and Cu concentrations provided useful but not uniformly monotonic trends across all pumps. Using a pragmatic early warning criterion based on the first exceedance of 100 particles/mL in the >15 μm fraction, the coarse particle signal provided lead times of approximately 13–345 min before the flow-based rejection limit was reached in the four tested units. Ferrographic analysis identified cutting and fatigue debris, together with larger wear particles, in units approaching or reaching the flow-based rejection limit. Overall, the findings demonstrate that the combined use of elemental analysis, particle counting, and ferrography provides a practical multi-indicator framework for relating oil-diagnostic signals to functional degradation of the NP-27T hydrogenerator. Under the present bench conditions, flow proved to be a more sensitive degradation indicator than pressure. The proposed approach therefore represents a useful complementary tool for maintenance decision-making and for integration with vibration-based condition monitoring of aircraft hydraulic systems.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Lubricants and Their Additives · Hydraulic and Pneumatic Systems · Mechanical Failure Analysis and Simulation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Independent Researcher, Irisova 30, 821 07 Bratislava, Slovakia
Department of Air Transport, Faculty of Transport and Aviation Engineering, Silesian University of Technology, 40-019 Katowice, Poland
Independent Researcher, Popradská 64/A, 040 11 Košice, Slovakia
Department of Aviation Engineering, Faculty of Aeronautics, Technical University of Košice, Rampová 7, 041 21 Košice, Slovakia
Funding
KEGA project “Economic assessments of the negative impact of aircraft noise and harmful emissions produced by aircraft engines”
References (35)
Show source-provided references
1. Balla, J. (1985). Tribológia a Tribotechnika, ES VŠP.
2. The suggestion and realization of devices for tests of biodegradable hydraulic fluids destined for tractors
3. Mistry, P., Hughes, P., Gunasekaran, A., Tucker, G., and Bevan, A. (2023). Using Event Data to Build Predictive Engine Failure Models. Machines, 11.10.3390/machines11070704 ↗
4. Ye, S., Da, B., Qi, L., Xiao, H., and Li, S. (2024). Condition Monitoring of Marine Diesel Lubrication System Based on an Optimized Random Singular Value Decomposition Model. Machines, 13.10.3390/machines13010007 ↗
5. Klarecki, K., Rabsztyn, D., and Czop, P. (2024). Modeling of Filtration Phenomenon in Hydrostatic Drives. Machines, 12.10.3390/machines12060417 ↗
6. Wu, X., Xu, P., Song, S., Zhang, S., and Wang, J. (2025). Compound Fault Diagnosis of Hydraulic Pump Based on Underdetermined Blind Source Separation. Machines, 13.10.3390/machines13100971 ↗
7. A statistical piston ring lubrication model considering the tribofilm and its effect of two-stroke marine engines10.1016/j.triboint.2022.107996 ↗
8. Hocko, M., Al-Rabeei, S., and Koščáková, M. (2023). Effects of FAME Biofuel and Jet A-1 Aviation Kerosene Blends on the Operating Characteristics of Aircraft Jet Engines. Appl. Sci., 13.10.3390/app13020971 ↗
9. Jablonický, J., Abrahám, R., Majdan, R., and Cvičela, P. (2007). Skúšky traktorov s biologicky odbúrateľnými olejmi. Bezpečnosť—Kvalita—Spoľahlivosť, 3 Medzinárodná Konferencia, SPU.
10. Probing the ultra-low friction mechanism of hydrogenated carbon films with controllable fullerene-like nano-structures grown with different bias voltage10.1016/j.triboint.2022.107796 ↗
11. Ultrahigh vacuum system for advanced tribology studies: Design principles and applications10.1016/j.triboint.2015.01.020 ↗
12. Sloboda, A.M., Beník, J., and Sloboda, A. (2002). Diagnostika hydraulického zdroja lietadla. Kvalita a Spoľahlivosť Strojov, 7. Medzinárodné Vedecké Sympózium, Vydavateľstvo SPU.
13. Sloboda, A.M., Sloboda, A., Piľa, J., and Hajduová, Z. (2009). Diagnostic as Suporting-Elemets for Maitenance in Aircraft Technology, Erdélyi Magyar Műszaki Tudományos Társaság (EMT).
14. Tkáč, Z., Drabant, Š., and Majdan, R. (2008). Design of Testing Durability Test of Gear Hydro-static Pumps. Acta Hydraul. Pneum., 2008.
15. Pačaiová, H., Andrejiová, M., Balažiková, M., Tomašková, M., Gazda, T., Chomová, K., Hijj, J., and Salaj, L. (2021). Methodology for Complex Efficiency Evaluation of Machinery Safety Measures in a Production Organization. Appl. Sci., 11.10.3390/app11010453 ↗
16. Hydrodynamic analysis of chemical mechanical polishing process10.1016/S0301-679X(00)00114-6 ↗
17. Liu, Z., Liu, Y., Zuo, H., Wang, H., and Chen, Z. (2022). An Oil Wear Particles Inline Optical Sensor Based on Motion Characteristics for Rotating Machines Condition Monitoring. Machines, 10.10.3390/machines10090727 ↗
18. Semi-Supervised Multi-Adversarial Domain-Adaptive Fault Diagnosis for Hydraulic Pumps from Pressure Simulation Data to Experimental Data10.1016/j.aei.2025.103658 ↗
19. Simulation Modeling of Kinematic Structures of Parallel Mechanisms10.48084/etasr.9898 ↗
20. Standards and Guidelines for Validating Next-Generation Sequencing Bioinformatics Pipelines10.1016/j.jmoldx.2017.11.003 ↗
21. Test Verification of the Condition of Hydraulic Oil of Construction Machines Following the Guidelines of ISO 4406 and NAS 163810.29354/diag/208882 ↗
22. Todić, N., Savić, S., Gordić, D., and Petrović, R. (2022). Experimental Research of the Hydrodynamic Processes of an Axial Piston Water Hydraulic Pump. Machines, 10.10.3390/machines10090728 ↗
23. Vibrodiagnostic of Aircraft Hydraulic Emergency Hydrogenerator NP 27T10.1016/j.engfailanal.2022.106337 ↗
24. Coronado, D., and Wenske, J. (2018). Monitoring the Oil of Wind-Turbine Gearboxes: Main Degradation Indicators and Detection Methods. Machines, 6.10.3390/machines6020025 ↗
25. Ma, L., Jiang, A., and Jiang, W. (2024). The Intelligent Diagnosis of a Hydraulic Plunger Pump Based on the MIGLCC-DLSTM Method Using Sound Signals. Machines, 12.10.3390/machines12120869 ↗
26. A Novel Workflow Including Denoising and Hybrid Deep Learning Model for Shield Tunneling Construction Parameter Prediction10.1016/j.engappai.2024.108103 ↗
27. Adelkhani, A., and Daneshkhah, E. (2025). Investigation of Engine Lubrication Oil Quality Using a Support Vector Machine and Electronic Nose. Machines, 13.10.3390/machines13020121 ↗
28. (2022). Hydraulic Fluid Power—Calibration of Automatic Particle Counters for Liquids (Standard No. ISO 11171:2022). Available online: https://www.iso.org/standard/82850.html.
29. Analytical Techniques and Source Apportionment for Heavy Metal(Loid)s in Groundwater: A Comprehensive Review10.1016/j.talo.2025.100572 ↗
30. Sharme, R.K., Quijada, M., Terrones, M., and Rana, M.M. (2024). Thin Conducting Films: Preparation Methods, Optical and Electrical Properties, and Emerging Trends, Challenges, and Opportunities. Materials, 17.10.3390/ma17184559 ↗
31. Development of Planar Diffractive Waveguides in Optical See-through Head-Mounted Displays10.1016/j.precisioneng.2019.09.009 ↗
32. Methods for Accurate Measurement of the Response of Photomultiplier Tubes and Intensity of Light Pulses10.1109/TNS.2011.2141683 ↗
33. Wong, J., Wei, H., Zhou, D., and Cao, Z. (2024). The Target Detection of Wear Particles in Ferrographic Images Based on the Improved YOLOv8. Lubricants, 12.10.3390/lubricants12080280 ↗
34. Hocko, M. (1983). Lietadlo MIG—21, Časť Systémy Lietadla, Skriptá.
35. Patrosz, P. (2021). Influence of Properties of Hydraulic Fluid on Pressure Peaks in Axial Piston Pumps’ Chambers. Energies, 14.10.3390/en14133764 ↗