Computer Modeling of Non-Standard Fire Testing Using the Combination of Ansys Fluent and Ansys Mechanical Software
Source abstract
Abstract
Computer modeling has a strong potential to replace or supplement physical fire testing of building structures. A prepared and applicable model must be simple to prepare, capable of calculating and processing results in the shortest possible time without the need for complex computing technology, thus saving time, resources, and finances and becoming a profitable alternative. The aim of this article is to design a model that would suitably represent a non-standard fire test using the Ansys software package 2025/R2. The model was created by combining the Ansys Discovery, Ansys Mechanical and Ansys Fluent software, connected using Ansys Workbench. Several calculation settings were tested, including the proposed finite mesh. The results showed the suitability of the proposed procedure and the division of calculations in separate software. The Species Transport and Viscous Shear Stress Transport (SST) k-omega model best represented fluid flow in Ansys Fluent. Ansys Mechanical confirmed the accuracy of the model in Ansys Fluent, when the predicted temperatures matched the real medium-scale fire test with an average coefficient of determination R2 = 0.93.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Fire effects on concrete materials · Fire dynamics and safety research · Engineering and Material Science Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Fire Protection, Faculty of Wood Sciences and Technology, Technical University in Zvolen, 960 01 Zvolen, Slovakia
Funding
Slovak Research and Development Agency · EU NextGenerationEU through the Recovery and Resilience Plan for Slovakia
References (59)
Show source-provided references
1. Niemz, P., Teischinger, A., and Sandberg, D. (2023). Springer Handbook of Wood Science and Technology, Springer Nature.10.1007/978-3-030-81315-4 ↗
2. Buchanan, A.H., Östman, S., and Frangi, A. (2025, November 20). White Paper on Fire Resistance of Timber Structures, Available online: https://nvlpubs.nist.gov/nistpubs/gcr/2015/NIST.GCR.15-985.pdf.
3. (1988). Council Directive 89/106/EEC of 21 December 1988 on the approximation of laws, regulations and administrative provisions of the Member States relating to construction products. Off. J. Eur. Communities, L 40, 12–26.
4. Is the fire performance of phase change materials a significant barrier to implementation in building applications?10.1016/j.est.2024.112421 ↗
5. National fire regulations for the use of wood in buildings—Worldwide review 2020
6. Wang, Y., Burgess, I., Wald, F., and Gillie, M. (2013). Performance-Based Fire Engineering of Structures, CRC Press. [1st ed.].10.1201/b12076 ↗
7. Performance-based design for structures in fire: Advances, challenges, and perspectives10.1016/j.firesaf.2023.104036 ↗
8. Figuli, L., Horváth, L.I., Kubíková, Z., Magdolenová, P., Malendowski, M., Mózer, V., Spremić, M., Szikra, C., Szymkuc, W., and Takács, L. (2021). V4 Guidelines on Advanced Structural Fire Safety Design with Eurocodes, Czech Technical University. [1st ed.].
9. Evolution of fire models for estimating structural fire-resistance10.1016/j.firesaf.2021.103367 ↗
10. Validation and Verification of Fire Models for Fire Safety Engineering10.1016/j.proeng.2013.08.052 ↗
11. McGrattan, K., Hostikka, S., McDermott, R., Floyd, J., Weinschenk, C., and Overholt, K. (2013). Fire Dynamics Simulator User’s Guide, NIST Special Publication.
12. Modelling heat transfer and fluid flow in a ship engine room using CFD analysis to evaluate and improve ventilation
13. FIRESTRUC—Integrating advanced three-dimensional modelling methodologies for predicting thermo-mechanical behaviour of steel and composite structures subjected to natural fires10.3801/IAFSS.FSS.9-1315 ↗
14. Integrated fire-structure simulation of a localzied fire test on a ceiling steel beam
15. Input Data of Burning Wood for CFD Modelling Using Small-Scale Experiments
16. Evaluation of optimization schemes and determination of solid fuel properties for CFD fire models using bench-scale pyrolysis tests10.1016/j.proci.2010.07.018 ↗
17. Wald, F., Cábová, K., Pokorný, M., and Hejtmánek, P. (2017). Modelování Dynamiky Požáru v Budovách, České vysoké učení technické v Praze.
18. A contemporary review of large-scale non-standard structural fire testing10.1186/2193-0414-2-1 ↗
19. (2009). Design of Timber Structures—Part 1–2: General—Structural Fire Design (Standard No. EN 1995-1-2:2004/AC:2009).
20. Hurley, M.J., Gottuk, D.T., Hall, J.R., Harada, K., Kuligowski, E.D., Puchovsky, M., Torero, J.L., Watts, J.M., and Wieczorek, C.J. (2016). SFPE Handbook of Fire Protection Engineering, Springer.10.1007/978-1-4939-2565-0 ↗
21. Tomaskova, M., Pokorny, J., Kucera, P., Balazikova, M., and Marasova, D. (2022). Fire Models as a Tool for Evaluation of Energy Balance in Burning Space Relating to Building Structures. Appl. Sci., 12.10.3390/app12052505 ↗
22. Validation of CFD fire model pressure predictions for modern residential style structures10.1016/j.firesaf.2021.103466 ↗
23. (1998). Guide: Guide for the Verification and Validation of Computational Fluid Dynamics Simulations (AIAA G-077-1998(2002)), American Institute of Aeronautics and Astronautics, Inc.
24. Verification and validation in modeling fire by computational fluid dynamics
25. ANSYS (2025). Ansys Fluid Dynamics Verification Manual, ANSYS Europe, Ltd.
26. Calculation of charring rate and char depth of spruce and pine wood from mass loss10.1007/s10973-018-7039-8 ↗
27. Structural organisation of the wood polymers in the wood fibre structure
28. The effect of chemical composition on the charring of wood across scales10.1016/j.proci.2018.06.080 ↗
29. Charring rate of wood as a tool for fire investigations10.1016/j.firesaf.2005.05.006 ↗
30. Comparison between the charring rate model and the conductive model of Eurocode 510.1002/fam.985 ↗
31. Charring rates and temperature profiles of wood sections10.1002/fam.819 ↗
32. (2020). Reaction to Fire Tests—Ignitability of Products Subjected to Direct Impingement of Flame—Part 2: Single-Flame Source Test (Standard No. EN ISO 11925-2).
33. Characterization of the Burning of Oriented Strand Boards Exposed to Flame10.37763/wr.1336-4561/68.3.547557 ↗
34. Charring model for timber frame floor assemblies with void cavities10.1016/j.firesaf.2007.12.009 ↗
35. Análise Numérica do Comportamento de Elementos de Madeira em Situação de Incêndio10.4322/floram.2012.019 ↗
36. A numerical study on fire endurance of wood beams exposed to three-side fire10.1631/jzus.A1200022 ↗
37. Perforated cellular wooden slabs under fire: Numerical and experimental approaches10.1016/j.jobe.2016.10.007 ↗
38. Numerical simulation of the fire behaviour of timber dovetail connections10.1016/j.firesaf.2017.12.005 ↗
39. Modification of Computer-Aided Modelling Input Data Based on Medium-Scale Fire Tests of Wooden Beams10.15376/biores.20.1.1230-1250 ↗
40. Spilák, D., and Majlingová, A. (2022). Progressive Methods in Studying the Charred Layer Parameters Change in Relation to Wood Moisture Content. Polymers, 14.10.3390/polym14224997 ↗
41. Spilák, D., Majlingová, A., Kacíková, D., and Tischler, P. (2022). Determining the Charred Layer of Wooden Beams with Finite Element Analysis Based on Enthalpy Approach. Buildings, 12.10.3390/buildings12070875 ↗
42. Compartment fire phenomena under limited ventilation10.1016/j.firesaf.2005.02.002 ↗
43. Zhao, Y., Miao, Z., Wang, S., and Ai, D. (2024). Numerical Simulation Study on the Response of Ship Engine Room Structure Under Fire Based on Thermo-Mechanical Coupling Model. Fire, 7.10.3390/fire7120480 ↗
44. Charring Layer on a Cross-laminated Timber Panel Construction
45. Chen, X., and Liu, Y. (2018). Finite Element Modeling and Simulation with ANSYS Workbench, CRC Press.10.1201/9781351045872 ↗
46. ANSYS (2025). Ansys Fluent in Ansys Workbench User’s Guide, ANSYS Europe, Ltd.
47. ANSYS (2025). Ansys Theory Reference, ANSYS Europe, Ltd.
48. ANSYS (2025). Ansys Fluent User’s Guide, ANSYS Europe, Ltd.
49. ANSYS (2025). ANSYS Meshing User’s Guide, ANSYS Europe, Ltd.
50. Dominik, Š., Andrea, M., and Danica, K. (2022). Progressive Methods for Determining the Fire Resistance of Wooden Beams, Aleš Čeněk.
51. Properties and material models for common construction materials at elevated temperatures10.1016/j.conbuildmat.2019.04.182 ↗
52. Derivation of thermal properties of phase change materials based on T-history method10.1016/j.est.2019.101062 ↗
53. Predicting the safety zone and fire dynamics of heptane multiple pool fire in a square dike using flamelet-generated manifold model10.1007/s40430-024-05363-2 ↗
54. Study of the influence of heat transfer of a CLT beam through FEM10.1088/1742-6596/1107/3/032003 ↗
55. Fredlund, B. (2026, April 13). A Model for Heat and Mass Transfer in Timber Structures During Fire: A Theoretical, Numerical and Experimental Study. Available online: https://www.lunduniversity.lu.se/lup/publication/1578bcec-cf7e-4dcf-9529-f1345db069c2.
56. Temperature distribution in a nailed gypsum-stud joint exposed to fire10.1002/fam.810160206 ↗
57. A model for predicting heat transfer through gypsum-board/wood-stud walls exposed to fire10.1002/fam.810180505 ↗
58. (2000). Timber Frame Assemblies Exposed to Standard and Parametric Fires. Part 2 A Design Model for Standard Fire Exposure (Standard No. ISO 834).
59. Frangi, A. (2001). Brandverhalten von Holz-Beton-Verbunddecken, Birkhäuser.