Effects of Vitamin C-Containing Commercial Toothpastes on Surface Roughness and Microhardness of Composite Resins: An In Vitro Study
Source abstract
Abstract
Background: The aim of this in vitro study is to comparatively evaluate the effects of toothpaste formulations containing and not containing vitamin C on the surface roughness and microhardness of different composite resin materials. Methods: Four different toothpastes (Sensodyne, Colgate, Klorhex, Dentiste) and three composite resin materials (Arabesk—microhybrid, Charisma Smart—nanohybrid, Estelite Sigma Quick—supra-nano filled) were used in the study. Composite discs measuring 10 mm in diameter and 2 mm in thickness were prepared and subjected to brushing simulations equivalent to 1 month (150 s) and 3 months (450 s). Surface roughness was measured using a mechanical profilometer, and microhardness was evaluated with a Vickers hardness tester. Surface morphology was further examined in detail using scanning electron microscopy (SEM) and atomic force microscopy (AFM). For statistical analyses, one-way ANOVA, repeated measures ANOVA, Kruskal–Wallis test, and Friedman test were employed, with the significance level set at p < 0.05. Results: Brushing procedures resulted in statistically significant changes in the surface roughness (ΔRa) and microhardness of the composites across all toothpaste groups (p < 0.05). The increase in surface roughness varied depending on the composite type, with the highest increase observed in the ESQ composite. In the ESQ composite, higher ΔRa values were obtained, particularly in the Dentiste (≈1.70 µm) and Colgate (≈1.52 µm) groups. Microhardness results, however, differed depending on the composite and toothpaste type. While a general trend toward increased microhardness was observed, a significant decrease in microhardness was detected in the Colgate and Dentiste groups of the ESQ composite (p < 0.05). Conclusions: This study demonstrates that the addition of vitamin C to toothpaste formulations increases the surface roughness of restorative materials and results in significant changes in their microhardness properties. These findings highlight the importance of considering the type of toothpaste used by patients in clinical practice, particularly in terms of restorative material selection and the long-term preservation of surface integrity.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Dental Erosion and Treatment · Dental materials and restorations · Dental Health and Care Utilization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Restorative Dentistry, Faculty of Dentistry, Inonu University, Malatya 44280, Turkey
Mechanical Engineering, Faculty of Engineering, Inonu University, Malatya 44210, Turkey
Department of Diagnostic Sciences, Texas A&M College of Dentistry, Dallas, TX 75246, USA
Funding
Scientific Research Projects Coordination Unit of İnönü University
References (51)
Show source-provided references
1. Abdullah, M., Jamil, R.T., and Attia, F.N. (2023). Vitamin C (ascorbic acid). StatPearls, StatPearls Publishing.
2. Total vitamin C, ascorbic acid, dehydroascorbic acid, antioxidant properties, and iron content of underutilized and commonly consumed fruits in Sri Lanka10.1155/2020/4783029 ↗
3. Vitamin C: Research update10.1097/01.CSMR.0000306503.32987.1e ↗
4. Pro- and antioxidant effects of vitamin C in cancer in correspondence to its dietary and pharmacological concentrations10.1155/2019/7286737 ↗
5. Munday, M.R., Rodricks, R., Fitzpatrick, M., Flood, V.M., and Gunton, J.E. (2020). A pilot study examining vitamin C levels in periodontal patients. Nutrients, 12.10.3390/nu12082255 ↗
6. Dietary vitamin C in human health
7. Vitamin C and cancer: The role of vitamin C in disease progression and quality of life in cancer patients10.1080/01635581.2020.1795692 ↗
8. Periodontal health10.1002/JPER.16-0517 ↗
9. Mariotti, A., and Hefti, A.F. (2015). Defining periodontal health. BMC Oral Health, 15.10.1186/1472-6831-15-S1-S6 ↗
10. Tooth brushing and oral health: How frequently and when should tooth brushing be performed?
11. Evaluating the effect of active charcoal-containing toothpaste on color change, microhardness, and surface roughness of tooth enamel and resin composite restorative materials10.1155/2023/6736623 ↗
12. Investigation of surface roughness values of various restorative materials after brushing with blue covarine containing whitening toothpaste by two different methods: AFM and profilometer10.1002/jemt.23925 ↗
13. Murererehe, J., Uwitonze, A.M., Nikuze, P., Patel, J., and Razzaque, M.S. (2022). Beneficial effects of vitamin C in maintaining optimal oral health. Front. Nutr., 8.10.3389/fnut.2021.805809 ↗
14. A randomised clinical trial to determine the effect of a toothpaste containing enzymes and proteins on gum health over 3 months10.1016/j.jdent.2018.12.002 ↗
15. Gingival health status in individuals using different types of toothpaste10.1016/j.jdent.2018.08.008 ↗
16. Evaluation of the safety and efficacy of complete care herbal toothpaste in controlling dental plaque, gingival bleeding and periodontal diseases
17. Effects of whitening toothpastes on the esthetic properties and surface roughness of a composite resin10.2334/josnusd.21-0044 ↗
18. Colak, G., and Katirci, G. (2023). In vitro evaluation of the effects of whitening toothpastes on the color and surface roughness of different composite resin materials. BMC Oral Health, 23.10.1186/s12903-023-03277-4 ↗
19. Evaluation of the effects of whitening toothpaste containing nanohydroxyapatite on surface roughness and color change in restorative materials
20. Erosive potential of vitamin and vitamin + mineral effervescent tablets10.61872/sdj-2016-05-01 ↗
21. Effect of effervescent C vitamins on the surface roughness and color stability of composite resins: A SEM study
22. Effect of pediatric multivitamin syrups and effervescent tablets on the surface microhardness and roughness of restorative materials: An in vitro study10.1016/j.jds.2020.03.017 ↗
23. Resin composite—State of the art10.1016/j.dental.2010.10.020 ↗
24. How to qualify and validate wear simulation devices and methods10.1016/j.dental.2006.02.002 ↗
25. Investigation of the effects of whitening toothpastes on enamel and cementum surfaces
26. Effect of whitening toothpastes on the surface roughness and microhardness of human teeth—An in vitro study10.1007/s00784-023-05381-9 ↗
27. Effects of charcoal-based whitening toothpastes on human enamel in terms of color, surface roughness, and microhardness: An in vitro study10.1007/s00784-021-03903-x ↗
28. Atalı, P.Y., Kaya, B.D., Özen, A.M., Tarçın, B., Şenol, A.A., Bayraktar, E.T., Korkut, B., Göçmen, G.B., Tağtekin, D., and Türkmen, C. (2022). Assessment of micro-hardness, degree of conversion, and flexural strength for single-shade universal resin composites. Polymers, 14.10.3390/polym14224987 ↗
29. Colour stability of stained composite resins after brushing with whitening toothpaste10.1111/idh.12529 ↗
30. Quantifying abrasive-blasted surface roughness profiles using scanning electron microscopy10.1007/s11998-020-00342-3 ↗
31. Wiktorski, C.A., Michelogiannakis, D., Rossouw, P.E., and Javed, F. (2024). The effect of charcoal-based dentifrice and conventional whitening toothpaste on the color stability and surface roughness of composite resin: A systematic review of in vitro studies. Dent. J., 12.10.3390/dj12030058 ↗
32. The effect of different polishing systems on the surface roughness of nanocomposites: Contact profilometry and SEM analyses
33. Environmental damage and occlusal contact area wear of composite restoratives10.1046/j.1365-2842.2002.00797.x ↗
34. An application of nanotechnology in advanced dental materials10.14219/jada.archive.2003.0054 ↗
35. Herbal toothpaste: A possible remedy for oral cancer
36. In vivo evaluation of an oral health toothpaste with 0.1% vitamin E acetate and 0.5% sunflower oil (with vitamin F)10.1111/j.1875-595X.2007.tb00152.x ↗
37. Investigating a vitamin D delivery toothpaste using a penetration enhancer compound
38. Enax, J., Meyer, F., Wiesche, E.S.Z., Fuhrmann, I.C., and Fabritius, H.-O. (2023). Toothpaste abrasion and abrasive particle content: Correlating high-resolution profilometric analysis with relative dentin abrasivity (RDA). Dent. J., 11.10.3390/dj11030079 ↗
39. Silicon-, silica-, and silicate-toothpastes for remineralization and repair of teeth: A scoping review
40. Color stability and surface roughness of composite resins submitted to brushing with bleaching toothpastes: An in situ study
41. Biçer, Z., Yaman, B.C., Çeliksöz, Ö., and Tepe, H. (2024). Surface roughness of different types of resin composites after artificial aging procedures: An in vitro study. BMC Oral Health, 24.10.1186/s12903-024-04669-w ↗
42. Ludovichetti, F.S., Lucchi, P., Bernardelle, M., Signoriello, A.G., Pezzato, L., Bertolini, R., Gallo, M., and Mazzoleni, S. (2024). Comparative effects of different abrasives on surface roughness of dental materials: An in vitro study. Materials, 14.10.3390/app14198956 ↗
43. In vitro effects of ascorbate and Trolox on the biocompatibility of dental restorative materials10.1016/S0142-9612(02)00221-1 ↗
44. Hydrolytic degradation of dental composites10.4028/www.scientific.net/KEM.614.113 ↗
45. Influence of chemical degradation and abrasion on surface properties of nanorestorative materials10.1590/1677-3225v14n2a01 ↗
46. Effect of finishing and polishing systems on the surface roughness and color change of composite resins
47. Color matching ability of resin composites incorporating supra-nano spherical filler producing structural color10.1016/j.dental.2021.01.023 ↗
48. Elmalawany, L.M., El-Refai, D.A., and Alian, G.A. (2023). Change in surface properties of two different dental resin composites after using various beverages and brushing. BMC Oral Health, 23.10.1186/s12903-023-03710-8 ↗
49. Removal of solid filler particles from composite with polymer matrix as a factor of abrasive wear
50. Evaluation of surface characteristics of dental composites using profilometry, scanning electron, atomic force microscopy and gloss-meter10.1007/s10856-006-0675-8 ↗
51. Surface roughness and morphology of resin composites polished with two-step polishing systems10.4012/dmj.2013-287 ↗