journal article·2020-12-05

Engineering and microscopic characteristics of natural rubber latex modified binders incorporating silane additive

Ashiru Sani, Mohd Rosli Mohd Hasan, Khairul Anuar Shariff, Ali Jamshidi, Ali Huddin Ibrahim, Sharvin Poovaneshvaran

Publisher page

Abstract

Asphalt pavement structures in countries with tropical climates are prone to experience distress, mainly due to water related damage. This study aims to evaluate the effects of ZycoTherm on the behaviour of natural rubber latex (NRL) modified asphalt binders. The morphology of the modified asphalt binders was also investigated. Two different percentages of NRL were incorporated in this study, at 3% and 6% respectively based on the weight of the asphalt binder. The modified asphalt binders (with or without ZycoTherm) were analysed based on softening point, penetration value, rotational viscosity, complex modulus, phase angle, rutting potential, and torsional recovery (TR). Subsequently, the spreadability of NRL in the asphalt binder was observed using a polarising optical microscope. The results indicate that the addition of NRL improved the performance of the asphalt binder in terms of its G*/sinδ parameter. An agglomerated network of mixed microstructures was formed in the modified asphalt binder matrix irrespective of the aging condition. Meanwhile, the morphology structure of virgin and short term-aged binders prepared with ZycoTherm indicates uniform dispersed network monographs. From the modified asphalt binder test results, it can be deduced that asphalt binders prepared with ZycoTherm exhibit superior resistance towards rutting potential.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Transport Systems and Technology

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Civil Engineering, Engineering Campus, Universiti Sains Malaysia, Seberang Perai Selatan, P. Pinang, Malaysia

Department of Civil Engineering, Kano University of Science and Technology, Wudil, Kano, Nigeria

School of Materials and Mineral Resources Engineering, Engineering Campus, Universiti Sains Malaysia, Seberang Perai Selatan, P. Pinang, Malaysia

School of Science and Engineering, University of Sunshine Coast, Sippy Downs, Australia

Funding

Universiti Sains Malaysia · Ministry of Higher Education

References (43)

Show source-provided references
1. 10.1016/j.conbuildmat.2007.07.00910.1016/j.conbuildmat.2007.07.009 ↗
2. 10.1016/j.conbuildmat.2014.04.02610.1016/j.conbuildmat.2014.04.026 ↗
3. 10.1016/j.conbuildmat.2017.12.11310.1016/j.conbuildmat.2017.12.113 ↗
4. American Society for Testing and Materials · 1995
5. American Society for Testing and Materials · 1997
6. American Society for Testing and Materials · 2012
7. 10.1061/(ASCE)MT.1943-5533.000045510.1061/(ASCE)MT.1943-5533.0000455 ↗
8. ARRB AG:PT/T122 · 2006
9. ASTM D2872, 2006. Standard test method for effect of heat and air on moving film of asphalt (rolling thin-film oven test). Annual Books of ASTM Standards, Vol. 4.03. West Conshohocken, PA, USA.
10. ASTM D7175-08, 2011. Standard test method for determining the rheological properties of asphalt binder using a dynamic shear rheometer. Annual Books of ASTM Standards, Vol. 4.03. West Conshohocken, PA, USA.
11. 10.1016/j.conbuildmat.2006.06.02710.1016/j.conbuildmat.2006.06.027 ↗
12. 10.1080/14680629.2017.130424810.1080/14680629.2017.1304248 ↗
13. Canestrari F. · Road Materials and Pavement Design · 2011 · 11 · 11
14. 10.1016/j.conbuildmat.2007.07.01410.1016/j.conbuildmat.2007.07.014 ↗
15. 10.1061/(ASCE)MT.1943-5533.000030810.1061/(ASCE)MT.1943-5533.0000308 ↗
16. 10.1016/j.ijprt.2016.09.00610.1016/j.ijprt.2016.09.006 ↗
17. 10.1061/(ASCE)MT.1943-5533.000023710.1061/(ASCE)MT.1943-5533.0000237 ↗
18. 10.1016/j.sbspro.2013.08.31110.1016/j.sbspro.2013.08.311 ↗
19. 10.1016/j.conbuildmat.2018.06.09910.1016/j.conbuildmat.2018.06.099 ↗
20. 10.1016/j.conbuildmat.2017.07.12310.1016/j.conbuildmat.2017.07.123 ↗
21. 10.1016/j.conbuildmat.2013.06.02810.1016/j.conbuildmat.2013.06.028 ↗
22. 10.1063/1.500573110.1063/1.5005731 ↗
23. Hasan M. R. M. · Journal of Traffic and Transportation Engineering · 2016 · 3 · 116
24. 10.1016/j.conbuildmat.2013.05.07910.1016/j.conbuildmat.2013.05.079 ↗
25. 10.1016/j.conbuildmat.2008.11.00710.1016/j.conbuildmat.2008.11.007 ↗
26. Jamshidi, A, 2013. Rheological properties of asphalt binders performance and sustainability of warm-mix asphalt incorporating sasobit®. Dissertation (PhD). University Sains Malaysia.
27. 10.1080/1029843070179222710.1080/10298430701792227 ↗
28. 10.1016/j.conbuildmat.2012.08.03310.1016/j.conbuildmat.2012.08.033 ↗
29. 10.1016/j.conbuildmat.2016.04.14310.1016/j.conbuildmat.2016.04.143 ↗
30. 10.1007/978-1-4471-2324-8_610.1007/978-1-4471-2324-8_6 ↗
31. 10.1111/j.1365-2818.2010.03388.x10.1111/j.1365-2818.2010.03388.x ↗
32. 10.1111/jmi.1235310.1111/jmi.12353 ↗
33. 10.1016/j.conbuildmat.2015.08.12310.1016/j.conbuildmat.2015.08.123 ↗
34. 10.1016/j.cscm.2014.04.00510.1016/j.cscm.2014.04.005 ↗
35. 10.1260/1708-5284.10.2.15910.1260/1708-5284.10.2.159 ↗
36. Wen Y. · International Journal of Pavement Engineering · 2017 · 1
37. 10.1061/(ASCE)MT.1943-5533.000011110.1061/(ASCE)MT.1943-5533.0000111 ↗
38. 10.1016/j.coldregions.2015.07.00710.1016/j.coldregions.2015.07.007 ↗
39. 10.1016/j.jclepro.2017.04.16810.1016/j.jclepro.2017.04.168 ↗
40. 10.1061/(ASCE)MT.1943-5533.000029510.1061/(ASCE)MT.1943-5533.0000295 ↗
41. 10.1016/j.jclepro.2016.09.04310.1016/j.jclepro.2016.09.043 ↗
42. 10.1080/10298436.2016.119987410.1080/10298436.2016.1199874 ↗
43. Zydex · 2014