A Synergistic Mining Method Combining Sidewall Retaining and Open Stoping with Delayed Backfilling for Preventing Stope Back Collapse

Many challenges are commonly encountered in the underground mining of steeply dipping thin-to-medium-thick orebodies associated with weak hanging wall rockmass, such as stope back collapse, high ore dilution, and poor stoping stability. To address these issues, a synergistic mining method combining sidewall retaining and open stoping with a delayed backfilling method is proposed. Taking the north wing orebody of the Erlihe lead–zinc mine as the engineering background, a 3D finite element numerical simulation model was established using MIDAS GTS(2026 version) to conduct a comparative analysis between the proposed mining method and the current mining method. The mechanical response characteristics of crown pillar stress, crown pillar settlement, hanging wall displacement, and plastic zone evolution were systematically investigated under different mining stages. The results show that the proposed method improves the stress and deformation distribution at the bottom of the crown pillar. The peak stress decreases from 13.72 MPa to 12.86 MPa, and the spatial extent of the high-stress zone is noticeably reduced. Meanwhile, the maximum crown pillar subsidence decreases, while the width of the main subsidence zone decreases from 11 nodes to 9 nodes, and the settlement of the end region decreases by 6.05%. In terms of hanging wall response, the maximum displacement is reduced by 9.3–26.5% during the stope extraction stage and 9.6–10.0% during the inter-pillar recovery stage, with an overall average reduction of approximately 14.0%. Furthermore, the plastic zone in the hanging wall surrounding rock becomes smaller and develops later under the proposed mining method. Our findings demonstrate that the new proposed mining method effectively modifies the stress transfer path, mitigates deformation of both the crown pillar and hanging wall rock, and delays the development of plastic failure, thereby improving stope stability under weak hanging wall rockmass conditions. The proposed method provides a practical technical solution for the safe and efficient extraction of steeply dipping thin-to-medium-thick orebodies.