Optimization of Transmission Parameters for a Tractor Equipped with HMCVT Based on Power Flow Analysis to Improve Efficiency
Source abstract
Abstract
In order to match the transmission parameters of HMCVT more reasonably, this paper takes a three-planetary-row parallel scheme as the research object, and proposes the concept of ‘hydraulic circuit power coefficient’, that is, the ratio of the power transmitted from the hydraulic circuit to the confluence mechanism to the output power of the HMCVT system. Under the condition of satisfying the variable speed range, the proportion of the power transmitted by the hydraulic circuit with lower efficiency is reduced as much as possible. The optimization function with the minimum sum of the hydraulic circuit power coefficients as the objective is established, and the PSO algorithm with compression factor is used for iterative optimization. The objective function is optimal when iterating 85 times, after parameter optimization, the hydraulic power coefficients of the three sections are reduced to varying degrees. When the displacement ratio e = −0.7, the HM1 section is reduced by 1.07, a decrease of 42%, and the sum of the hydraulic power coefficients at the endpoints of the three working sections is reduced from 4.24 to 2.91, a decrease of 32%. The physical simulation model of a three-planetary parallel HMCVT is established by AMESim software, and the speed ratio characteristics obtained by simulation are consistent with the theoretical analysis results, which verifies the correctness of the model. The parameters before and after optimization are substituted into the model for a simulation test, and the transmission efficiency of three working sections is obtained. The simulation results show that the efficiency of the three working sections after parameter optimization is higher than that before optimization. When the displacement ratio e = −0.8, the transmission efficiency of the HM1 section increases from 0.3 to 0.45, which is increased by 50%. When the displacement ratio e = 0.98, the transmission efficiency of the HM2 section increases from 0.78 to 0.83, which is increased by 6.4%, and the optimization effect is obvious.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Electric and Hybrid Vehicle Technologies · Hydraulic and Pneumatic Systems · Aerodynamics and Fluid Dynamics Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
College of Engineering, Nanjing Agricultural University, Nanjing 210031, China
Department of Vehicle Engineering, College of Automobile and Traffic Engineering, Nanjing Forestry University, Nanjing 210037, China
Funding
Open Project of State Key Laboratory of Tractor Power System in China · National Key Research and Development Plan
References (30)
Show source-provided references
1. Adaptive torque tracking control during slip engagement of a dry clutch in vehicle power train10.1016/j.mechmachtheory.2018.12.033 ↗
2. Summary of the Research of Automated Mechanical Transmission
3. Development and prospect of key technologies on agricultural tractor
4. Design of hydro mechanical transmission using network analysis10.1243/095440705X6406 ↗
5. Optimum matching of electric vehicle power train10.1016/j.egypro.2016.06.107 ↗
6. Drive Scheme Design and Characteristic Analysis of Multi-range Hydro-mechanical CVT
7. Reasonable matching of engine and hydro-mechanical continuously variable transmission system of tractor
8. Design optimization of input and output coupled power split infinitely variable transmissions10.1115/1.3179145 ↗
9. Matching Optimization for Tractor Powertrain Based on Improved NSGA-II Algorithm
10. Liu, Z., Zhang, G., Chu, G., Niu, H., Zhang, Y., and Yang, F. (2021). Design matching and dynamic performance test for an HST-based drive system of a hillside crawler tractor. Agriculture, 11.10.3390/agriculture11050466 ↗
11. Wan, L.R., Dai, H.Z., Zeng, Q.L., Sun, Z.Y., and Tian, M.Q. (2020). Characteristic analysis and co-validation of hydro-mechanical continuously variable transmission based on the wheel loader. Appl. Sci., 10.10.3390/app10175900 ↗
12. Characteristic analysis of a new compound HMCVT
13. Research on dynamic characteristics of hydro-mechanical continuously variable transmission
14. Design and characteristic analysis of hydro-mechanical continuous variable transmission of cotton picker
15. Kong, W.Q. (2020). Dynamic Analysis and Modification Optimization of HMCVT Gear Considering Axial Error. [Ph.D. Thesis, Nanjing Agricultural University].
16. Optimization Design on Planetary Gear Train Parameter of HMCVT Based on Math CAD
17. Wang, X.Q. (2015). Study on Power Re-Circulation in Hydro-Mechanical Composite Transmission. [Master’s Thesis, Chongqing University].
18. Transmission design and force analysis of HMCVT for high power tractor
19. Multi-objective optimization of hydro-mechanical power split transmissions10.1016/j.mechmachtheory.2012.11.009 ↗
20. Semi-empirical model for elastic tyre traffic ability and methods for the rapid determination of its related parameters10.1016/j.biosystemseng.2018.07.010 ↗
21. A new non-geometric transmission parameter optimization design method for HMCVT based on improved GA and maximum transmission efficiency10.1016/j.compag.2019.105034 ↗
22. Based on improved SA and GA a new method for optimizing transmission parameters of automotive HMCVT
23. I-SA algorithm based optimization design and mode-switching strategy for a novel 3-axis-simpson dual-motor coupling drive system of PEV10.3390/wevj12040221 ↗
24. Mechanical efficiency of HMCVT under steady-state conditions10.1155/2021/4275922 ↗
25. Zhou, H.D., Wang, L., Lu, Z.X., Qian, J., Zhang, H.J., Zhao, Y.R., Cheng, Z., and Wang, X.W. (2022). Transmission Parameter Design and Characteristic Analysis of Three-Row Parallel Planetary Gear HMCVT. Machines, 10.10.3390/machines10090740 ↗
26. Speed changing control strategy for improving tractor fuel economy
27. HMCVT Steady State Transmission Efficiency Based on HST-EGT Torque Ratio
28. Modeling and Simulation of Continuous Power Shift Process of Hydro-Mechanical Continuously Variable Transmission
29. Research on the HMCVT gear shifting smoothness of the four-speed self-propelled cotton picker10.5194/ms-11-267-2020 ↗
30. Research on Speed Ratio Control Strategy of Hydro-Mechanical Continuously Variable Transmission