Analysis of Vertical Shafts Excavation and Support Based on Cavity Contraction–Expansion Method
Source abstract
Abstract
Vertical shafts are key channels for underground energy storage, mineral exploitation, and related engineering fields. Yet in deeply buried complex strata and high ground stress environments, traditional passive supports are prone to lining failure, while linear yield criteria cannot accurately characterize rock masses’ nonlinear mechanical behavior, limiting their use in shaft analysis. The core mechanical process of shaft construction aligns with the cavity contraction–expansion mechanism: excavation induces cavity unloading and contraction, causing shaft deformation and plastic zone expansion in surrounding rock; support enables cavity reverse expansion via preset shaft wall counter loads to actively control surrounding rock deformation. Based on this, this study integrates the Hoek–Brown nonlinear yield criterion, large-strain theory, and non-associated flow rules; couples cavity contraction–expansion semi-analytical solutions with the composite shaft wall mechanical model; and establishes a composite shaft wall–surrounding rock interaction analysis method. This research clarifies excavation-induced surrounding rock mechanical responses, reveals shaft wall counter loads’ regulatory effect on surrounding rock, and develops a systematic excavation support calculation workflow. Parameter analysis shows that increasing lining thickness is the most direct way to reduce inner wall tensile stress and improve safety; composite linings optimize stress distribution and enhance structural collaborative performance; and safety assessment confirms the lining inner wall as a structural weak zone. The proposed method and findings fill the gap in applying cavity contraction–expansion theory to shaft construction, providing reliable theoretical and practical guidance for deep shaft design, construction, and safety evaluation.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Rock Mechanics and Modeling · Geomechanics and Mining Engineering · Tailings Management and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
China Coal No.5 Construction Co., Ltd. the No.3 Engineering Division, Xuzhou 221140, China
China Coal Mine Construction Group Co., Ltd., Beijing 102218, China
Funding
special support for major science and technology of China coal
References (49)
Show source-provided references
1. Evaluation of the Energy Potential of an Adiabatic Compressed Air Energy Storage System Based on a Novel Thermal Energy Storage System in a Post Mining Shaft10.1016/j.est.2022.105282 ↗
2. Design of a Shaft Foot as a Supporting Element of the Thermal Energy Storage in Adiabatic CAES Concept in Post-Mining Shaft10.1088/1755-1315/1132/1/012010 ↗
3. Kulpa, J., Kamiński, P., Stecuła, K., Prostański, D., Matusiak, P., Kowol, D., Kopacz, M., and Olczak, P. (2021). Technical and Economic Aspects of Electric Energy Storage in a Mine Shaft—Budryk Case Study. Energies, 14.10.3390/en14217337 ↗
4. Vertical Shaft Collapse at the Jinchuan Nickel Mine, Gansu Province, China: Analysis of Contributing Factors and Causal Mechanisms10.1007/s12665-012-1930-6 ↗
5. Shang, X., Zhu, S., Jiang, F., Liu, J., Li, J., Hitch, M., Liu, H., Tang, S., and Zhu, C. (2022). Study on Dynamic Disaster Mechanisms of Thick Hard Roof Induced by Hydraulic Fracturing in Surface Vertical Well. Minerals, 12.10.3390/min12121537 ↗
6. Elastic and Elastoplastic Analysis of Surrounding Rock in CAES Chambers Considering Excavation-Induced Centripetal Exponential Reduction in Mechanical Properties10.1002/dug2.70062 ↗
7. Experimental Study on the Performance of Hybrid Ventilation System Combining Forced Longitudinal Flow and Shaft Natural Ventilation in Tunnels10.1016/j.tust.2020.103491 ↗
8. Simulation of Slightly Degraded Reinforced Concrete Shaft Lining in Thick Topsoil
9. Development of Urban Underground Space in Coastal Cities in China: A Review10.1002/dug2.12034 ↗
10. Judeel, G., Keyter, G., and Harte, N. (2011, January 16–21). Shaft Sinking and Lining Design for a Deep Potash Shaft in Squeezing Ground. Proceedings of the 12th ISRM Congress, Beijing, China.
11. Study on Creep Deformation and Energy Development of Underground Surrounding Rock under Four-Dimensional Support10.1002/dug2.12078 ↗
12. Frost-Heaving Pressure in Geotechnical Engineering Materials during Freezing Process10.1016/j.ijmst.2017.06.003 ↗
13. Large Diameter Shafts for Underground Infrastructure10.1016/j.tust.2014.09.010 ↗
14. A Methodology for Lining Design of Circular Mine Shafts in Different Rock Masses10.1016/j.ijmst.2016.05.049 ↗
15. Chen, B., Mo, P., Lu, Z., Kuang, L., Zhang, Q., and Eslami, A. (2025). Semi-Analytical Solution for the Stability of Deep Vertical Shaft Considering Time-Dependent Rock-Structure Interaction. Deep Undergr. Sci. Eng., 1–20.10.1002/dug2.70054 ↗
16. Analysis of Lateral Earth Pressure on a Vertical Circular Shaft Considering the 3D Arching Effect10.1016/j.tust.2015.01.002 ↗
17. Mechanism of Rupture of Shaft Linings in Coal Mine Areas Buried by Thick Over-Soils in East China10.1680/geot.2005.55.3.237 ↗
18. Monitoring and Analysis of the Stress and Deformation of Shaft Lining and the Influence of Freezing Tube Fracture in Deep Topsoil10.1016/j.coldregions.2021.103420 ↗
19. Distribution Characteristics of the Additional Vertical Stress on a Shaft Wall in Thick and Deep Alluvium: A Simulation Analysis10.1007/s11069-018-3545-z ↗
20. Analysis of Drained Cavity Unloading–Contraction Considering Different Degrees of Intermediate Principal Stress with Unified Strength Theory10.1061/(ASCE)GM.1943-5622.0001703 ↗
21. Celestino, T.B., Rocha, H.C., and Gonçalves, F.L. (2009). Geotechnical Aspects of Shaft Design and Construction in São Paulo City. World Tunnel Congress, Hungarian Tunnelling Association.
22. Numerical Modeling on Strain Energy Evolution in Rock System Interaction with Energy-Absorbing Prop and Rock Bolt10.1016/j.ijmst.2023.08.007 ↗
23. Sun, Q., Ma, F., Guo, J., Li, G., and Feng, X. (2020). Deformation Failure Mechanism of Deep Vertical Shaft in Jinchuan Mining Area. Sustainability, 12.10.3390/su12062226 ↗
24. Investigation of Shaft Stability and Anisotropic Deformation in a Deep Shaft in Idaho, United States10.1016/j.ijrmms.2018.03.017 ↗
25. The Theory of Indentation and Hardness Tests10.1088/0959-5309/57/3/301 ↗
26. Hill, R. (1950). Mathematical Theory of Plasticity, Oxford University Press.
27. In Situ Measurement of Soil Properties with the Pressuremeter
28. The Quasi-Static Expansion of a Spherical Cavity in Metals and Ideal Soils10.1093/qjmam/12.1.52 ↗
29. Cylindrical Cavity Expansion and Contraction in Tresca Soil10.1680/geot.2007.57.3.305 ↗
30. Elastoplastic Model of a Deep Tunnel for a Rock with Variable Dilatancy10.1007/BF01042527 ↗
31. Finite Cavity Expansion in Dilatant Soils: Loading Analysis10.1680/geot.1991.41.2.173 ↗
32. Spherical Cavity Expansion in a Drucker-Prager Solid10.1115/1.2788978 ↗
33. Extension of Spatially Mobilized Plane (SMP) to Frictional and Cohesive Materials and Its Application to Cemented Sands10.3208/sandf.35.4_63 ↗
34. Exact Undrained Elasto-Plastic Solution for Cylindrical Cavity Expansion in Modified Cam Clay Soil10.1680/geot.11.P.027 ↗
35. Analytical Solution for Undrained Plane Strain Expansion of a Cylindrical Cavity in Modified Cam Clay10.12989/gae.2012.4.1.019 ↗
36. Undrained Cavity Expansion–Contraction Analysis in CASM and Its Application for Pressuremeter Tests
37. Drained Cavity Expansion-Contraction in CASM and Its Application for Pressuremeter Tests in Sands10.1061/JGGEFK.GTENG-12417 ↗
38. Drained Cavity Expansion Analysis with a Unified State Parameter Model for Clay and Sand10.1139/cgj-2016-0695 ↗
39. Empirical Strength Criterion for Rock Masses10.1061/AJGEB6.0001029 ↗
40. Hoek, E., Carranza-Torres, C., Corkum, B., and Corkum, B. (2002). Hoek-Brown Failure Criterion—2002 Edition, Proc. NARMS-TAC Conference.
41. Elasto-Plastic Solution of Tunnel Problems Using the Generalized Form of the Hoek-Brown Failure Criterion10.1016/j.ijrmms.2004.03.111 ↗
42. Elastic–Brittle–Plastic Analysis of Circular Openings in Hoek–Brown Media10.1016/S1365-1609(03)00040-6 ↗
43. Cavity Expansion in Rock Masses Obeying the “Hoek–Brown” Failure Criterion10.1007/s00603-019-01920-7 ↗
44. Benchmark Solutions of Large-Strain Cavity Contraction for Deep Tunnel Convergence in Geomaterials10.1016/j.jrmge.2019.07.015 ↗
45. Exact and Approximate Solutions for Displacements around Circular Openings in Elastic–Brittle–Plastic Hoek–Brown Rock10.1016/j.ijrmms.2005.03.019 ↗
46. Simplified Solution for Viscoelastic-Plastic Interaction between Tunnel Support and Surrounding Rock Based on MC and GZZ Strength Criteria10.1016/j.compgeo.2021.104393 ↗
47. The Hoek–Brown Failure Criterion and GSI—2018 Edition10.1016/j.jrmge.2018.08.001 ↗
48. (2024). Code for Seismic Design of Buildings (Standard No. GB/T50010-2010).
49. (2014). Standard for Engineering Classification of Rock Masses (Standard No. GB/T 50218-2014).