journal article·2026-01-29Open access

Gripper Used in an Educational Mechatronic System Used for Characteristics Analysis of the Post-Cryogenic Treatment

Edgar Moraru, Robert-Valentin Răbuga, Cristian-Gabriel Alionte, Eugenia Tanasă, Mircea-Iulian Nistor

Applied Sciences· Volume 16· Issue 3

Abstract

This paper presents a gripper, part of the mechatronic system for positioning a parallelepiped sample from a cryogenic treatment system to the devices for evaluating and investigating the properties arising from the application of heat treatment. The system is part of a complex educational framework that enables students to research the effects of combined treatments, where a component is selectively heat-treated in specific areas using a laser system, followed by cooling the entire component with a cryogenic system. Also, the investigation methodology performed by students is illustrated. The system allows structural changes to be investigated with other methods, and the paper exemplified the analysis of the material using the SEM-EDX and XRD systems.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Mechatronics Education and Applications · Heat Transfer and Numerical Methods · Various Chemistry Research Topics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechatronics and Precision Mechanics, Faculty of Mechanical Engineering and Mechatronics, National University of Science and Technology Politehnica Bucharest, 060042 Bucharest, Romania

Funding

National University of Science and Technology Politehnica Bucharest

References (38)

Show source-provided references
1. Effects of Thermal Annealing on the Optical Properties of the Potassium Dihydrogen Phosphate Measured Using UV-Vis-NIR Spectroscopy
2. Effect of annealing temperature on structural and optical properties of copper oxide thin films deposited by sol-gel spin coating method
3. A new FTIR method for estimating the firing temperature of ceramic bronze-casting moulds from early China10.1038/s41598-021-82806-z ↗
4. Falco, G.D., Bocchicchio, S., Commodo, M., Minutolo, P., and D’Anna, A. (2022). Raman Spectroscopy of Nasent Soot Oxidation: Structural Analysis During Heating. Front. Energy Res., 10.10.3389/fenrg.2022.878171 ↗
5. Chukova, O., Borkovska, L., Khomenkova, L., Korsunska, N., Ponomaryov, S., Androulidaki, M., and Stratakis, E. (2023). Effects of thermal treatment on the complex structure of luminescence emission of Li-doped ZnO screen-printed films. Front. Phys., 11.10.3389/fphy.2023.1305114 ↗
6. Effect of Post Thermal Annealing on the Optical Properties of InP/ZnS Quantum Dot Films10.1186/s11671-018-2784-y ↗
7. Total Luminescence Spectroscopy for Quantification of Temperature Effects on Photophysical Properties of Photoluminescent Materials10.1021/acsmeasuresciau.2c00047 ↗
8. Spectroscopic Ellipsometry Analysis of a Thin Film Composite Membrane Consisting of Polysulfone on a Porous α-Alumina Support10.1021/am2015958 ↗
9. Wisz, G., Sibiński, M., Łabuz, M.B., Potera, P., Płoch, D., Bester, M., and Yavorskyi, R. (2025). Effect of Annealing in Air on the Structural and Optical Properties and Efficiency Improvement of TiO2/CuxO Solar Cells Obtained via Direct-Current Reactive Magnetron Sputtering. Materials, 18.10.3390/ma18040888 ↗
10. Structural thermal optical performance (STOP) analysis and experimental verification of an hyperspectral imager for the HYPSO CubeSat10.1016/j.optlaseng.2023.107919 ↗
11. Temperature modulated optical refractometry: A quasi-isothermal method to determine the dynamic volume expansion coefficient10.1016/j.tca.2012.12.011 ↗
12. Three-dimensional imaging of microstructural evolution in SEM-based nano-CT, Tomography of Materials and Structures
13. Mechanical property measurements enabled by short-term Fourier-transform of atomic force microscopy thermal deflection analysis10.3762/bjnano.16.136 ↗
14. Ali, A., Chiang, Y.W., and Santos, R.M. (2022). X-ray Diffraction Techniques for Mineral Characterization: A Review for Engineers of the Fundamentals, Applications, and Research Directions. Minerals, 12.10.3390/min12020205 ↗
15. In situ high temperature X-ray diffraction and dilatometric analysis of CGO–Cu composites for solid oxide devices10.1038/s41598-026-35161-w ↗
16. Wang, C., Zhang, G., and Zhang, X. (2022). Experimental and Photothermal Performance Evaluation of Multi-Wall Carbon-Nanotube-Enhanced Microencapsulation Phase Change Slurry for Efficient Photothermal Conversion and Storage. Energies, 15.10.3390/en15207627 ↗
17. Optical absorption spectroscopy of reactive oxygen and nitrogen species in a surface dielectric barrier discharge10.1088/1361-6463/ac5661 ↗
18. Luminescence-enabled three-dimensional temperature bioimaging10.1038/s41467-025-59681-7 ↗
19. Alionte, C.G., Moraru, E., Alionte, A.D., Gheorghe, M.V., and Nistor, M.I. (2025). Manufacturing and Control of a Robotic Arm Used in an Educational Mechatronic Platform for Laser Treatments, Followed by Cooling at Low Temperatures. Appl. Sci., 15.10.3390/app152212157 ↗
20. Yifeng, G., Ge, S., Nair, A., Bidwai, A., Raghuram, C.S., Grezmak, J., Sartoretti, G., and Daltorio, K.A. (2023). Legged robots for object manipulation: A review. Front. Mech. Eng., 9.10.3389/fmech.2023.1142421 ↗
21. Meng, J., Buzzatto, J., Liu, Y., and Liarokapis, M. (2022). On Aerial Robots with Grasping and Perching Capabilities: A Comprehensive Review. Front. Robot. AI, 8.10.3389/frobt.2021.739173 ↗
22. Mazzeo, A., Aguzzi, J., Calisti, M., Canese, S., Vecchi, F., Stefanni, S., and Controzzi, M. (2022). Marine Robotics for Deep-Sea Specimen Collection: A Systematic Review of Underwater Grippers. Sensors, 22.10.3390/s22020648 ↗
23. State-of-the-art robotic grippers, grasping and control strategies, as well as their applications in agricultural robots: A review10.1016/j.compag.2020.105694 ↗
24. State of the Art in Artificial Wrists: A Review of Prosthetic and Robotic Wrist Design10.1109/TRO.2018.2865890 ↗
25. Hernandez, J., Sunny, M.S.H., Sanjuan, J., Rulik, I., Zarif, M.I.I., Ahamed, S.I., Ahmed, H.U., and Rahman, M.H. (2023). Current Designs of Robotic Arm Grippers: A Comprehensive Systematic Review. Robotics, 12.10.3390/robotics12010005 ↗
26. A statistical review of industrial robotic grippers10.1016/j.rcim.2017.05.007 ↗
27. Implementation of an origami inspired gripper robot for picking objects of variable geometry10.1016/j.matpr.2022.01.255 ↗
28. Grămescu, B., Cartal, L.A., Hashim, A.S., and Nițu, C. (2019, January 5–6). Clamping Mechanisms of an Inspection Robot Working on External Pipe Surface. Proceedings of the ICOMECYME 2019: International Conference of Mechatronics and Cyber-MixMechatronics, Bucharest, Romania.10.1007/978-3-030-26991-3_20 ↗
29. Ciobanu, R., Rizescu, C.I., Rizescu, D., and Gramescu, B. (2024). Surface Durability of 3D-Printed Polymer Gears. Appl. Sci., 14.10.3390/app14062531 ↗
30. Local laser heat treatment of ultra high strength steels to improve formability10.1007/s11740-009-0186-9 ↗
31. Tailoring material properties of aluminum by local laser heat treatment10.1016/j.phpro.2012.10.034 ↗
32. Influence of cryogenic treatment on hardness, tensile properties, and microstructure of aluminum alloy AA606110.1016/j.matpr.2022.02.131 ↗
33. Effects of the combined heat and cryogenic treatment on the stability of austenite in a high Co-Ni steel10.1515/amm-2015-0358 ↗
34. Combined effects of cryogenic treatment and tempering on microstructural and tribological features of AISI H13 steel10.1016/j.matchemphys.2022.126802 ↗
35. Effect of Cryogenic Heat Treatment and Heat Treatment on the Influence of Mechanical, Energy, and Wear Properties of 316L Stainless Steel by Selective Laser Melting10.1007/s11837-022-05382-1 ↗
36. Effects of traditional heat treatment and a novel deep cryogenic treatment on microstructure and mechanical properties of low-carbon high-alloy martensitic bearing steel10.1007/s42243-020-00527-5 ↗
37. Effect of Deep Cryogenic Treatment on Microstructures and Performances of Aluminum Alloys: A Review10.1016/j.jmrt.2023.08.140 ↗
38. Multiscale Modification of Aluminum Alloys with Deep Cryogenic Treatment for Advanced Properties10.1016/j.jmrt.2022.10.089 ↗