Urban Soundscapes and Noise Assessment: Key Insights from ANSI, ASTM, and ISO Standards
Source abstract
Abstract
Urban noise and soundscape assessment is critical for sustainable, human-centered city planning. A comprehensive overview of key standards is essential to ensure consistent measurements, enable cross-study comparisons, and support practical applications. This review examines standards from the American National Standards Institute/Acoustical Society of America (ANSI/ASA), ASTM International, and the International Organization for Standardization (ISO), highlighting their principles, methodologies, and roles in evaluating urban acoustic environments. It discusses how these standards facilitate accurate noise quantification, capture human perceptual responses, and guide soundscape design and management across occupational, community, and experimental settings. Standardized questionnaires, rating scales, and perceptual frameworks are also reviewed. Finally, this paper identifies gaps in current guidance, including limited approaches to continuous monitoring, cultural adaptation, multisensory interactions, and integration with urban planning.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Noise Effects and Management · Hearing Loss and Rehabilitation · Vehicle Noise and Vibration Control
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Independent Researcher, Omaha, NE 68105, USA
References (100+)
Show source-provided references
1. Introduction to the special issue on: Advances in soundscape: Emerging trends and challenges in research and practice10.1121/10.0036699 ↗
2. A review of the measurement procedure of the ISO 1996 standard. Relationship with the European Noise Directive10.1016/j.scitotenv.2016.04.207 ↗
3. Assessing community noise annoyance: A review of two decades of the international technical specification ISO/TS 15666: 200310.1121/10.0006967 ↗
4. A comprehensive review of noise measurement, standards, assessment, geospatial mapping and public health
5. Adoption of ISO/TS 12913-2: 2018 protocols for data collection from individuals in soundscape studies: An overview of the literature10.1007/s40726-023-00283-6 ↗
6. Soundscape and its context: A framework based on a systematic review10.1121/10.0036882 ↗
7. A systematic review of urban noise and its management in Southeast Asia contrasted to that of management in developed countries10.1007/s11356-025-36473-6 ↗
8. ASTM (2025, December 22). Committee E33 on Building and Environmental Acoustics, Available online: https://www.astm.org/membership-participation/technical-committees/committee-e33.
9. A history of ASA standards10.1121/1.5080329 ↗
10. ISO (2025, December 22). Technical Committee ISO/TC 43 Acoustics, Available online: https://www.iso.org/committee/48458.html.
11. (2024). Acoustical Terminology (Standard No. ASA/ANSI S1.1-2013 (R2024)).
12. (2024). Electroacoustics—Sound Level Meters—Part 1: Specifications (Standard No. ASA/ANSI S1.4-2014/Part 1/IEC 61672-1-2013 (R2024)).
13. (2024). Electroacoustics—Sound Level Meters—Part 2: Pattern Evaluation Tests. (Standard No. ASA/ANSI S1.4-2014/Part 2/IEC 61672-2-2013 (R2024)).
14. (2024). Electroacoustics—Sound Level Meters—Part 3: Periodic Tests (Standard No. ASA/ANSI S1.4-2014/Part 3/IEC 61672-3:2013 (R2024)).
15. (2020). Electroacoustics—Measurement Microphones—Part 1: Specifications for Laboratory Standard Microphones (Standard No. ANSI/ASA S1.15-2021/Part 1/IEC 61094-1:2000).
16. (2020). Electroacoustics—Measurement Microphones—Part 2: Primary Method for Pressure Calibration of Laboratory Standard Microphones by the Reciprocity Technique (Standard No. ANSI/ASA S1.15-2021/Part 2/IEC 61094-2:2009).
17. (2016). Electroacoustics—Measurement Microphones—Part 3: Primary Method for Free-Field Calibration of Laboratory Standard Microphones by the Reciprocity Technique (Standard No. ANSI/ASA S1.15-2021/Part 3/IEC 61094-3:2016).
18. (1995). Electroacoustics—Measurement Microphones—Part 4: Specifications for Working Standard Microphones (Standard No. ANSI/ASA S1.15-2021/Part 4/IEC 61094-4:1995).
19. (2016). Electroacoustics—Measurement Microphones—Part 5: Methods for Pressure Calibration of Working Standard Microphones by Comparison (Standard No. ANSI/ASA S1.15-2021/Part 5/IEC 61094-5:2016).
20. (2004). Electroacoustics—Measurement Microphones—Part 6: Electrostatic Actuators for Determination of Frequency Response (Standard No. ANSI/ASA S1.15-2021/Part 6/IEC 61094-6:2004).
21. (2006). Electroacoustics—Measurement Microphones—Part 7: Values for the Difference Between free Field and Pressure Sensitivity Levels of Laboratory Standard Microphones (Standard No. ANSI/ASA S1.15-2021/Part 7/IEC TS 61094-7:2006).
22. (2023). Electroacoustics—Octave-Band and Fractional-Octave-Band Filters—Part 1: Specifications (Standard No. ASA/ANSI S1.11/Part 1/IEC 61260-1-2014 (R2023)).
23. (2024). Electroacoustics—Octave-Band and Fractional-Octave-Band Filters—Part 2: Pattern-Evaluation Tests (Standard No. ASA/ANSI S1.11-2016/Part 2/IEC 61260-2:2016 (R2024)).
24. (2024). Electroacoustics—Octave-Band and Fractional-Octave-Band Filters—Part 3: Periodic Tests (Standard No. ASA/ANSI S1.11-2016/Part 3/IEC 61260-3:2016 (R2024)).
25. (2006). Environmental Sound Package (Standard No. ASA/ANSI S12.9).
26. (2023). Quantities and Procedures for Description and Measurement of Environmental Sound, Part 1: Basic Quantities and Definitions (Standard No. ASA/ANSI S12.9-2013/Part 1 (R2023)).
27. (2023). Quantities and Procedures for Description and Measurement of Environmental Sound, Part 2: Measurement of Long-Term, Wide-Area Sound (Standard No. ANSI/ASA S12.9-1992/Part 2 (R2023)).
28. (2023). Quantities and Procedures for Description and Measurement of Environmental Sound—Part 3: Short-Term Measurements with an Observer Present (Standard No. ASA/ANSI S12.9-2013/Part 3 (R2023)).
29. (2021). Quantities and Procedures for Description and Measurement of Environmental Sound—Part 4: Noise Assessment and Prediction of Long-Term Community Response (Standard No. ASA/ANSI S12.9-2021/Part 4).
30. (2024). Quantities and Procedures for Description and Measurement of Environmental Sound—Part 5: Sound Level Descriptors for Determination of Compatible Land Use (Standard No. ASA/ANSI S12.9-2007/Part 5 (R2024)).
31. (2025). Quantities and Procedures for Description and Measurement of Environmental Sound—Part 7: Measurement of Low-frequency Noise and Infrasound Outdoors in the Presence of Wind and Indoors in Occupied Spaces (Standard No. ASA/ANSI S12.9-2016/Part 7 (R2025)).
32. (2023). Standard Terminology Relating to Building and Environmental Acoustics (Standard No. ASTM C634-22).
33. (2021). Standard Guide for Measurement of Outdoor A-Weighted Sound Levels (Standard No. ASTM E1014-12(2021)).
34. (2024). Standard Test Method for Field Measurement of Sound Power Level by the Two-Surface Method (Standard No. ASTM E1124-10(2024)).
35. (2022). Standard Test Method for Conducting Outdoor Sound Measurements Using a Statistical Sound Analysis System (Standard No. ASTM E1503-22).
36. (2023). Standard Guide for Applying Environmental Noise Measurement Methods and Criteria (Standard No. ASTM E1686-23).
37. (2021). Standard Guide for Measuring Outdoor Sound Received from a Nearby Fixed Source (Standard No. ASTM E1780-12(2021)).
38. (2023). Standard Practice for Measurement of Equipment-Generated Continuous Noise for Assessment of Health Hazards (Standard No. ASTM E2202-23).
39. (2016). Acoustics—Description, Measurement and Assessment of Environmental Noise Part 1: Basic Quantities and Assessment Procedures (Standard No. ISO 1996-1:2016).
40. (2017). Acoustics—Description, Measurement and Assessment of Environmental Noise Part 2: Determination of Sound Pressure Levels (Standard No. ISO 1996-2:2017).
41. (2024). Acoustics—Attenuation of Sound During Propagation Outdoors—Part 2: Engineering Method for the Prediction of Sound Pressure Levels Outdoors (Standard No. ISO 9613-2:2024).
42. (2010). Acoustics—Determination of Sound Power Levels and Sound Energy Levels of Noise Sources Using Sound Pressure—Survey Method Using an Enveloping Measurement Surface over a Reflecting Plane (Standard No. ISO 3746:2010).
43. (2010). Acoustics—Determination of Sound Power Levels and Sound Energy Levels of Noise Sources Using Sound Pressure—Engineering/Survey Methods for Use In Situ in a Reverberant Environment (Standard No. ISO 3747:2010).
44. (2025). Rating Noise with Respect to Speech Interference This Standard Defines a Simple Numerical Method for Rating the Expected Speech-Interfering Aspects of Noise Using Acoustical Measurements of the Noise (Standard No. ASA/ANSI S12.65-2006 (R2025)).
45. (2025). Methods to Define and Measure the Residual Sound in Protected Natural and Quiet Residential Areas (Standard No. ANSI/ASA S3/SC1.100-2014/ANSI/ASA S12.100-2014 (R2020)).
46. (2014). Acoustics—Soundscape Part 1: Definition and Conceptual Framework (Standard No. ISO 12913-1:2014).
47. (2018). Acoustics—Soundscape Part 2: Data Collection and Reporting Requirements (Standard No. ISO/TS 12913-2:2018).
48. (2025). Acoustics—Soundscape Part 3: Data Analysis (Standard No. ISO/TS 12913-3:2025).
49. (2025). Acoustics—Soundscape Part 4: Design and Intervention (Standard No. ISO/CD TS 12913-4).
50. (2025). Acoustics—Non-Acoustic Factors Influencing the Perception, Interpretation and Response to Environmental Sounds Part 1: Definition and Conceptual Framework (Standard No. ISO/TS 16755-1:2025).
51. (2017). Acoustics—Methods for Calculating Loudness Part 1: Zwicker Method (Standard No. ISO 532-1:2017).
52. (2017). Acoustics—Methods for Calculating Loudness Part 2: Moore-Glasberg Method (Standard No. ISO 532-2:2017).
53. (2023). Acoustics—Methods for Calculating Loudness Part 3: Moore-Glasberg-Schlittenlacher Method (Standard No. ISO 532-3:2023).
54. (2021). Acoustics—Assessment of Noise Annoyance by Means of Social and Socio-Acoustic Surveys (Standard No. ISO/TS 15666:2021).
55. López, J.M., Alonso, J., Asensio, C., Pavón, I., Gascó, L., and de Arcas, G. (2020). A digital signal processor based acoustic sensor for outdoor noise monitoring in smart cities. Sensors, 20.10.3390/s20030605 ↗
56. Petri, D., Licitra, G., Vigotti, M.A., and Fredianelli, L. (2021). Effects of exposure to road, railway, airport and recreational noise on blood pressure and hypertension. Int. J. Environ. Res. Public Health, 18.10.3390/ijerph18179145 ↗
57. Predicting Long-Term Environmental Acoustic Urban Patterns Using 2-Slot Short-Term Measurement and Feed-Forward Artificial Neural Networks10.1016/j.ecoinf.2025.103544 ↗
58. Gjestland, T. (2024). Measuring Community Response to Noise—Factors Affecting the Results of Annoyance Surveys. Int. J. Environ. Res. Public Health, 21.10.20944/preprints202402.1413.v1 ↗
59. Measurement and analysis of transport noise and vibration: A review of techniques, case studies, and future directions10.1016/j.measurement.2023.113354 ↗
60. Lou, H., Rong, N., Zhao, Y., and Min, H. (2023). Noise impact evaluations of an outdoor air filter tower in urban blocks. Front. Environ. Sci., 11.10.3389/fenvs.2023.1182339 ↗
61. Acquisition Module for a Wireless Acoustic Sensor Network Suitable for Argentinian Urban Environments10.12911/22998993/152436 ↗
62. Ilo, Peru: Urban noise levels in coastal areas
63. Urban noise assessment in hospitals: Measurements and mapping in the context of the city of Sorocaba, Brazil10.1007/s10661-024-12391-x ↗
64. Shen, Y., Cao, G., Dong, H.Y., Dong, B., and Lee, C.M. (2025). UN15: An Urban Noise Dataset Coupled with Time–Frequency Attention for Environmental Sound Classification. Appl. Sci., 15.10.3390/app15158413 ↗
65. Microphone position and noise exposure assessment of building façades10.1016/j.apacoust.2019.107157 ↗
66. Impact of measuring microphone location on the result of environmental noise assessment10.1016/j.apacoust.2020.107662 ↗
67. Development and validation of a portable test stand for sound measurement near the building façade10.1016/j.measurement.2023.112856 ↗
68. Zagubień, A., and Wolniewicz, K. (2024). Measurements and Analysis of Sound Reflections from Selected Building Façades. Appl. Sci., 14.10.3390/app142411627 ↗
69. A comprehensive review of noise pollution monitoring studies at bus transit terminals10.1515/noise-2022-0180 ↗
70. Wilk, J., Szyszlak-Bargłowicz, J., Słowik, T., Stachyra, P., and Zając, G. (2025). Evaluation of the Acoustic Impact of the Public Road Network on a Nature Conservation Area: A Case Study. Appl. Sci., 15.10.3390/app15126511 ↗
71. Development of parameter-based criteria for applying adjustment for highly impulsive sound sources10.1016/j.apacoust.2021.108375 ↗
72. Foraster, M., Esnaola, M., López-Vicente, M., Rivas, I., Álvarez-Pedrerol, M., Persavento, C., Sebastian-Galles, N., Pujol, J., Dadvand, P., and Sunyer, J. (2022). Exposure to road traffic noise and cognitive development in schoolchildren in Barcelona, Spain: A population-based cohort study. PLoS Med., 19.10.1371/journal.pmed.1004001 ↗
73. Gedik Toker, Ö., Tas Elibol, N., Kuru, E., Görmezoğlu, Z., Görener, A., and Toker, K. (2025). Industrial noise: Impacts on workers’ health and performance below permissible limits. BMC Public Health, 25.10.1186/s12889-025-22732-1 ↗
74. Use of mathematical models and computer software for analysis of traffic noise10.1515/eng-2020-0021 ↗
75. Methodology for Uncertainty Estimation of Long-Term Environmental Noise Measurements
76. Comparison of analytical and machine learning models in traffic noise modeling and predictions10.1007/s12647-023-00692-4 ↗
77. Deaconu, M., Cican, G., and Cristea, L. (2020). Noise impact mitigation of shopping centres located near densely populated areas for a better quality of life. Appl. Sci., 10.10.3390/app10186484 ↗
78. Yajing, D., Lin, Y., Yiquan, X., and Hequn, M. (2023). Evaluation of Environmental Impact of Aircraft Operation Noise at Nanjing Lukou International Airport. Proceedings of the International Conference on Environmental Science and Technology, Springer.10.1007/978-3-031-54684-6_4 ↗
79. Development of a real-time noise estimation model for construction sites10.1016/j.aei.2023.102133 ↗
80. Assessment of low-frequency noise from wind turbines under different weather conditions10.1007/s40201-020-00478-9 ↗
81. Comparison of models for sound propagation of low frequency wind turbine noise
82. Argüelles Díaz, K.M., Velarde-Suárez, S., Fernández Oro, J.M., and González Pérez, J. (2020). Simplified assessment on the wind farm noise impact of the E2O experimental offshore station in the Asturian coast. Energies, 13.10.17811/ruo_datasets.81103 ↗
83. Sound Propagation Analysis of a 10 MW Wind Turbine: Influence of the Tower, Operational States, and Atmospheric Conditions10.1016/j.renene.2025.123842 ↗
84. Stępień, B., Wszołek, T., Mleczko, D., Małecki, P., Pawlik, P., Kłaczyński, M., and Czapla, M. (2024). Suitability analysis of selected methods for modelling infrasound and low-frequency noise from wind turbines. Energies, 17.10.3390/en17122832 ↗
85. Wind farm noise prediction and auralization10.1051/aacus/2024007 ↗
86. Forest landscape shield models for assessing audio-visual disturbances of wind turbines10.1016/j.jenvman.2024.120070 ↗
87. Optimization of wind farm operation with a noise constraint10.5194/wes-8-255-2023 ↗
88. The analysis of similarity of calculation results and local measurements of wind farm noise10.1016/j.measurement.2017.03.041 ↗
89. Papadakis, N.M., and Stavroulakis, G.E. (2020). Finite element method for the estimation of insertion loss of noise barriers: Comparison with various formulae (2D). Urban Sci., 4.10.3390/urbansci4040077 ↗
90. Cymatic Urbanism: A Spatial Modelling Framework for Urban Noise Resilience10.1016/j.scs.2025.107065 ↗
91. Linking ecoacoustic indices to psychoacoustic perception of the urban acoustic environment10.1016/j.ecolind.2023.111023 ↗
92. Non-linear effects of ecoacoustic indices on urban soundscape assessments based on gradient boosting decision trees in summer Chongqing, China10.1016/j.buildenv.2025.112984 ↗
93. Hammami, M.A., and Claramunt, C. (2024). A Quantitative and Qualitative Experimental Framework for the Evaluation of Urban Soundscapes: Application to the City of Sidi Bou Saïd. ISPRS Int. J. Geo Inf., 13.10.3390/ijgi13050152 ↗
94. Association between perceived sound type dominance and overall assessment of the acoustic environment using ISO 12913 soundwalks10.1121/10.0032472 ↗
95. Mansouri, Y., Matallah, M.E., Attar, A., Mahar, W.A., and Attia, S. (2025). The Impact of Soundscape on Pedestrian Comfort, Perception and Walking Experience in Béjaïa, Algeria. Acoustics, 7.10.3390/acoustics7040064 ↗
96. Measuring soundscape quality of urban environments using physiological indicators: Construction of physiological assessment dimensions and comparison with subjective dimensions10.1016/j.buildenv.2024.111549 ↗
97. Xu, Z., Yang, M., and Yu, L. (2024). Identification, Evaluation, and Influencing Factors of Soundscapes in Public Open Spaces in High-Density Residential Areas. Appl. Sci., 14.10.3390/app14166946 ↗
98. Feng, L.Y., Hu, F., Liu, B.Y., Zhang, D.Y., Guo, L.H., Yu, S., and Hong, X.C. (2025). How Land-Use Planning Deeply Affects the Spatial Distribution of Composite Soundscapes. Sustainability, 17.10.3390/su172410948 ↗
99. City, town, village: Potential differences in residents soundscape perception using ISO/TS 12913-2: 201810.1016/j.apacoust.2023.109659 ↗
100. Interrelationships between soundscape attributes and sound categories10.1121/10.0038626 ↗